Solid Apollo SA-CTRL-InWallRGB-Black User manual

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 1
Glass Touch In-wall RGB
™
Product Description
Solid Apollo’s Glass Touch In-Wall RGB controllers are an easy and sophisticated way to control lights in
one room or space. The Glass Touch In-Wall RGB controllers run on 12-24V power and supply 12-24V
Color Changing RGB LED lights and can be mounted in walls with any American electrical gang/screw
boxes. You can easily turn on your lights, quickly choose a color, cycle through 20 present colors and 19
color changing programs, as well as controlling program speed and full dimming functionality. The Glass
Touch In-Wall RGB controllers also have sound indication, meaning when you press a key, an slight beep
is emitted to conrm the change.
Main Functions
•Mountable in an American Wall Electrical Gang Box
•Mountable in Walls or surfaces to control LED RGB Color Changing
•Turn on and O your 12-24V LED Light Fixtures at the touch o a button
•Quick Dimming Control with Glide Dimmer
•Program Speed Control using Glide Dimmer when program running
•Precise Color Selection with Color Wheel
•19 Color Changing Modes
•20 Dierent Static Color Options
•Sound/Touch Recognition to conrm button selection.
This Manual will review
•The entire Installation Process
•Product Features and Primary Uses
•Detailed Functionality
•Technical Parameters
SA-CTRL-InWallRGB-Black SA-CTRL-InWallRGB-White

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 2
Glass Touch In-wall RGB
™
Installation: Wiring
To 12-24V
Lights
12-24V
Power Source
BGR++_
Solid Apollo’s Glass Touch In-Wall RGB Controllers are meant to be housed inside a wall. They conveniently t inside of any American
Electrical gang box. To securely install, you will have to rst carefully wire your controller through your gang box (not included) in
order to test your lights with both your power and RGB LEDs, and then be able to put it nicely into your gang box.
Thread wires
from inside your
wall through
your gang box
•Wire the Backplate
of your controller
with each wire in the
designated Terminal
Wire Slot
•Tighten the screws on
the bottom of unit to
secure each wire
Terminal Wire
Slot
1.A. B.
C.
Bottom Screws
terminal wire slots

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 3
Glass Touch In-wall RGB
™
Installation: Separating the Backplate and Faceplate
Terms to Know:
Now that you have wired your controller, and tested it to ensure it is working with your current wiring, you can begin to take o the faceplate.
This is so you are able to mount the backplate (which has the two screwholes) to any American Gang Box (not included).
2. Carefully follow Diagram 2 below to separate the faceplate and backplate of your GlassTouch RGB LED Controller.
To begin, use a athead screw driver as demonstrated in Diagram 2 below to slowly detach the back of your unit from the front. Do not separate these two pieces
by more than an inch in any direction, as they are connected by a White Connection ribbon which needs to be gently removed in later steps .
2.
3.
A. B. C.
C.
B.A.
D.
Faceplate Backplate Slide&Lock Connection White Connection Ribbon
3. Carefully follow Diagram 3 below to remove the White Connection Ribbon from the front plate only.
Now that your faceplate and backplate are separated, you can begin to remove the White Connection Ribbon from the faceplate portion of your controller. This
will allow you to eventually screw the backplate into the gang box/screw box you plan on using. To gently detach the White Connection ribbon from the faceplate
portion of your unit, you will see in that the back of the faceplate has a Slide&lock Connection that holds down theWhite Connection ribbon. This Slide&Lock clip
has a black bar that holds the Slide&Lock Connection. Gently pull the clip black bar approximately 1/16 of an inch to unlock theWhite Connection ribbon, and then
slowly remove the ribbon. You should encounter no resistance when you gently pull out theWhite Connection ribbon from the faceplate unit.
Pop open
gently with
athead
screwdriver
Lift Slowly
Push black bar
up gently 1/16”
It should look
like this when
“unlocked”
Slowly
Remove White
Connection
Ribbon from
faceplate

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 4
Glass Touch In-wall RGB
™
Installation: Putting your controller in the Gang Box
4. Follow Diagram 3 below to begin inserting your gang box, and then controller backplate, into the wall.
First secure your gang box in the wall. This will allows you to carefully place the backplate of your controller into the
gang box housing, and attach the backplate with two screws. Make sure the orientation of the gang box, and your
backplate are correct for installing your faceplate right side up.
After removing the faceplate, you can now mount your controller with two screws inside an American Gang/Switch Box (screws not included)
and place that entire unit in the wall.
Place your backplate and wires inside
your gang box, and begin screwing it into
your secured gang box at the indicated
screwholes.
Your unit will look like this when it is
securely inside the wall.
Your Unit
Should look
Something
like this at this
point. With the wires
already inside
your wall.
To Backplate...
Attach your
gang box inside
the wall, if it
isn’t already,
with wires
going through
the box into
your backplate
4.A. B.
C.

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 5
Glass Touch In-wall RGB
™
Installation: Putting your controller back together.
5. Follow Diagram2 below to begin wiring your controller. Your gang box should be secured in the wall at this time, with your controller backplate screwed
into, and your wiring connections secured within the gang box. You will now put back the white connection strip (with the blue side of the tape facing up) into the
faceplate slot, and the snap back on the faceplate to your backplate.
You can now put back on your controller’s faceplate, completing the installation.
Overlay the faceplate onto the
back plate (with the connection
strip secured) and snap your unit
together.
Your unit will look like this, when it
is securely inside the wall.
5.A. B.
D. F.
G.
C.
E.
Push clip in
gently 1/16”
It should look
like this when
“unlocked”
Faceplate

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 6
Glass Touch In-wall RGB
™
Smooth Glide Dimmer/
Program Speed Control
Program
Selection
Color Wheel
Static
Color
Selection
Power On/O
Sound Control
Basic Functionality
Figure 1
SA-CTRL-InWallRGB-Black

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 7
Glass Touch In-wall RGB
™
Advanced Functionality
Power Button and Sound Control: Your controller’s main button which turns your 12V-24V DC RGB LED lights on and o as well as enabling and
disabling the sound indications for your controller. To turn on and o your lights, simply tap the power button. This will toggle all of your RGB LED
lights On and O.
To disable sound (your controller has sound response as default“out of the box”) you can simply hold the power button for ve seconds. You will hear
an indication beep, and can now use your lights without hearing the sound.To turn the sound indications back on, hold down the power button again
for ve seconds. You will hear an indication beep, conrming the change.
Color Wheel: Your Glass Touch In-Wall RGB Controller has a color wheel for easy and immediate color section. Simply press down on the wheel at
any point with your nger to select a color, or swirl your nger around the wheel to slowly shift between colors. Color selection and brightness will
be recalled when the power is turned o, then back on.
Quick Static Color Selection: This button allows you to quickly cycle through 20 preset colors (described in detail on the next page) for easy color
selection. This allows you to easily select an exact tone (such as Cyan, White, orYellow) without nding its exact position on the color wheel. Simple
tap to cycle through the 20 pre-loaded colors.
Quick Program Selection: This button allows you to toggle through the 19 pre-installed programs. You can tap the “Quick Program Selection”
Button to cycle through all 19 programs, one after the other. A full list of programs is available on the next page. Program Speed (covered in the
following section) and Specic Program are saved when powering o, meaning you can turn o your lights, and then back on to exactly what they
had been displaying.

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 8
Glass Touch In-wall RGB
™
Advanced Functionality
Glide Dimmer and Speed Button: To dim your RGB LED lights, or to control a program speed, you will use the Glide Dimmer and Speed Adjust-
ment button pictured below. When displaying a single, static color, this button can dim your lights, or brighten them. Simply tap on a specic point,
or slide your nger to brighten or dim your lights.
When a program is running, you can control its speed by suing the same Glide dimmer as when controlling brightness. To speed up any of the 19
pre-installed programs, simply press the“Brighten Lights”section of your slide dimmer (aka Speed up Program) and to slow down your running
pre-installed program, you can simply press the“Dim Lights”section. The currently running program and its specic speed will be remembered if
you turn o your controller, then turn it back on.
Static Color Control
While a program is Running
Static Color List Pre-Installed Program List
Speed up Program
Brighten Lights
Slow Down Program
Dim Lights
1. Red
2. Orange
3. Deep-Yellow
4. Yellow
5. Light Yellow
6. Green
7. Light Green
8. Cyan
9. Light Blue
10. Sky Blue
11. Blue
12. Deep Blue
13. Blue-Purple
14. Purple
15. Brown
16. White
17. Ivory
18. Pink White
19. Yellow White
20. Blue White
1. Red Burst Flashing
2. Green Burst Flashing
3. Blue Burst Flashing
4. Blue Burst Flashing
5. Yellow Burst Flashing
6. White Burst Flashing
7. Three Color Burst Flashing
8. Three Color FlashingThree
9. Color Jumping
10. Six Color Jumping
11. Red Gradual Fade
12. Yellow Gradual Fade
13. Green Gradual Fade
14. Cyan-Blue Gradual fade
15. Blue Gradual Fade
16. Purple Gradual Fade
17. White Gradual fade
18. Three Color gradual Fade
19. Seven Color Gradual Fade
20. Seven Color Gradual Changing

PRODUCT MANUAL
Glass Touch RGB Controller 12V-24V Toll Free. 866-592-3873
www.SolidApollo.com
[e-mail]
page 9
Glass Touch In-wall RGB
™
Technical Details
• 12V-24V DC In
• 12V-24V DC Out
• 4 amps max per channel
• 192W max @ 24V
• 96W max @ 12V
• Dimensions: 4.75”x 2.78”x 1.75”
2.88”
4.75”
2.75”
1.28”
2.75”
1.63”
1.28”
.5”
.5”
Product Dimensions
Glass Touch In-Wall Controllers
Solid Apollo LED