Solight PRO 1L202 User manual

USER MANUAL
PRO 1L202

MAIN FUNCTIONS
Wireless
control
Ultrawide
angle of view
Wireless
control
Quality
night
mode
1080P
Full HD video
Two-way
full duplex
Communication
TF card
Max. 128 GB

PACKAGING CONTENT
Smart WiFi doorbe
1x USB cable
1x User
Instructions
Packing of scr
and dowels
1x Imbus
key
1x Installation
holder
Reversible
adhesive tape

DESCRIPTION OF EQUIPMENT
Speaker
Sound channel
Lens
Image recording
Infrared LEDs
Additional light in low light
conditions
PIR sensor
PIR sensor settings
Indicator light
Presents the working states of the
device
Ring button
Sends a notification to the app
when the button is pressed
Microphone
Audio conversion
Microphone
Lens
Motion sensor
Light sensor
Ring button

Waterproof
cover
USB - C
5V/2A
When you open the waterproof
silicone cover on the side,
you'll
find a USB-C charging slot.
The TF memory card slot
can be found by removing
the battery cover.

Svorky 1, 2:
Power supply 12-24V AC or DC.
Before using the device for the first time, turn on the device,
press and hold the reset button for approximately 5 seconds
until "System reset" is heard and then release the button.
GENERAL INFORMATION
•The device supports mobile phones/tablets with iOS 9.0 and
above, or Android 4.4 and above.
•The device is not compatible with Mac and Windows
computers.
•The device is only compatible with 2.4GHz Wi-Fi.

INDICATOR LIGHT SIGNALLING
LED status
The meaning of status
Blue lights up, red
flashes slowly
Configuration status
Blue lights up, red
flashes fast
Connecting to Wi-Fi
Blue and red light
Weak battery
Shining blue
Connection is fine, live
transmission
Neither blue nor red
lights
Sleep mode or off-line
MOBILE APPLICATIONS
Search for the "TUYA SMART or SMART LIFE" app in the
AppStore (for Apple) or in GooglePlay (for Android) and
download it.
After downloading the mobile app, open it and log in. If you
don't have an account, click "Register" and follow the
instructions in the app. Once you have completed the
registration, log in.

DEVICE PAIRING
1. To pair your device, click on "Add device" or "+" in the
top right corner

2. Select "Camera and lock" and then "Smart Doorbell" (Fig.
1)
3. Confirm that the indicator light is flashing on the device
by ticking it and click "Next" (Fig. 2)
4. Enter the name of your 2.4GHz Wi-Fi network and enter
its password (Figure 3).
1
2

5. Use the camera to read the QR code from your phone
and confirm in the mobile app if you hear a beep.
6. Wait for the device to pair.
For more detailed information about the application and
product, please visit www.youtube.com under the title "Solight
1L202 - Application Instructions".
3
4

LOCATION OF THE BELL
1. Use double-sided tape to place on a smooth surface. Glue the
cover first, then insert the bell into it.
2. To attach the device to a rough surface, first screw the
bracket to the wall and then attach the bell to it.

CHARGING THE DOORBELL
Always take the device inside the building when charging,
never charge outside. Attach a USB-C cable to the side of the
doorbell, then plug it into a 5V/2A USB adapter, which plugs
into an AC 100~240V outlet. Charge for at least 4 hours.

GONG PAIRING
Equipment description
1. USB plug
2. Play melody button - plays the currently selected melody
3. Melody selection button - plays other melodies
4. Volume - set the ringer volume
5. LED indicator
The bell and gong operate at 433MHz. Pair the gong with the
bell after you have paired the bell with the mobile app.
Gong pairing procedure:
1. Connect the gong to the USB adapter and plug it into the
wall socket.
2. Press and hold the play button (2) and volume change
button (4) for 3 seconds until the indicator turns red. Then
press the ring button on the doorbell within 15 seconds to
connect the gong to the doorbell, after which the
indicator goes out and the doorbell rings.
3. You can move the gong within 30m (in the open) of the
bell.

Ringtone selection
Choose from 20 melodies. Press the melody selection button
(3) to select a suitable melody.
Clearing memory for pairing
Press and hold the play button (2) and the melody selection
button (3) for 3 seconds, then plug the gong into the socket.
The LED indicator will start flashing red, once the flashing
stops, the memory is cleared.
POWER SUPPLY
Permanent powering of the doorbell is possible using direct
current or alternating current in the range of 12-24V, which is
connected to the terminals on the back of the video doorbell. A
source with a power of 12W and higher is suitable for powering
the doorbell.
The product has been issued with a CE Declaration of
Conformity in accordance with the applicable regulations. On
request from the importer at www.solight.cz