Solt GGSUC908S User manual

E S S E N T I A L S FOR LIFE
User
Manual
MODEL
GGSUC908S
V 1.3 | 0722
90cm Dual Fuel
Freestanding Cooker

Welcome Congratulations on purchasing
your new Freestanding Cooker!
The Sôlt brand is proudly
distributed within Australia by
Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual
for information regarding your product’s parts and labour
warranty, or visit us online at www.residentia.group
At Residentia Group, we are customer obsessed and our
Support Team are there to ensure you get the most out of
your appliance. Should you want to learn more about your
freestanding cooker features, and importantly taking care
of your appliance when cleaning, our Support Team are
here to help.
You can use our online Support Centre at anytime by
visiting http://support.residentiagroup.com.au, or you can
contact us via calling us on 1300 11 HELP (4357).
It is important that you read through the following use and
care manual thoroughly to familiarise yourself with the
installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Sôlt appliance and we
look forward to being of service to you.
Kind Regards,
The Residentia Team
Residentia Group
—
Head Office.
165 Barkly Ave
Burnley
Victoria 3121
Australia
—
ACN.
600 546 656
—
Online.
residentia.group
Sôlt
—
Online.
www.solt.house
—
Instagram.
/solt.house
—
Facebook.
/solt.appliances

Contents 2Welcome
4General Safety Instructions
7Your Freestanding Cooker
10 Operating Instructions
14 Cooking Guidelines
16 Cleaning & Maintenance
23 Installation Instructions
32 Electrical Connection
34 Gas Connection
39 Technical Specifications
40 Attach Your Receipt
41 Purchase Details
42 Warranty Information
Sôlt recommends the use of original spare parts. When contacting our customer service team, please ensure
that you have the following information at hand (which can be found on your appliances’ rating plate).
— Model Number
— Serial Number
T . 1300 11 4357 | E. [e-mail]
Customer Care

4
IMPORTANT SAFETY INSTRUCTIONS
Read carefully and keep for future reference
Read this manual thoroughly before first use, even if
you are familiar with this type of product. The safety
precautions enclosed herein reduce the risk of fire, electric
shock and injury when correctly adhered to. Make sure
you understand all instructions and warnings.
Read the instructions in full before installing or using this
appliance.
Keep the manual in a safe place for future reference,
along with the completed warranty card and purchase
receipt. If you sell or transfer ownership of this product,
pass on these instructions to the new owner. Always
follow basic safety precautions and accident prevention
measures when using an electrical appliance, including
the following:
WARNING! Installation Electrical Shock Hazard
WARNING: All electrical work associated with the
installation of this appliance must be carried out by a
licensed electrician.
WARNING: This appliance must be installed by a suitably
qualified person in strict accordance with all instructions
in this manual.
Disconnect the appliance from the mains electricity
supply before carrying out any work or maintenance on it.
Failure to follow this advice may result in electrical shock
or death.
IMPORTANT INSTALLATION ADVICE
• Adjacent furniture: When having the appliance
installed, make sure that the adjacent furniture or
housing, and all installation materials, are able to
withstand a minimum temperature of 85ºC above the
ambient room temperature while the oven is in use.
• Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration
at temperatures below the guidelines given above.
We assume no liability for any damage caused by
the appliance being installed in contravention of this
temperature limit, or by placing adjacent cabinet
materials closer than 4mm near the appliance.
• Ventilation: Heat, steam and moisture will be
created during use of the appliance. Take care to
avoid injury and ensure that the room is adequately
ventilated. If the appliance is going to be used for
prolonged periods of time, additional ventilation
may be required. If in doubt about your ventilation
requirements, consult your qualified installer.
• Cables: Do not allow electrical fittings or cables to
come into contact with areas on the appliance that
gets hot.
• Curtains: Do not install the oven next to curtains or
soft furnishings.
• Damaged cord: If the power cord is damaged, it
must be replaced by the manufacturer or a qualified
service engineer in order to avoid a hazard
• Packaging: Ensure that all packaging elements are
kept away from children and disposed of correctly.
Most packaging elements can be recycled.
GENERAL USAGE CONDITIONS AND RESTRICTIONS
• Domestic use only: This appliance is designed
for indoor domestic use only, it is not intended for
commercial use and this will void the warranty.
• Intended purpose: Only use this appliance for its
intended purpose, in its intended environment and
as described in this manual. Any other use may cause
fire, electric shock or injury. It is not intended for
commercial, trade or industrial use.
• Before first use: Remove all packaging and protective
films. With the oven completely empty, heat the oven
for 45 minutes at the maximum temperature; this
will burn off any residual manufacturing residues,
removing any smoke and smells.
• Follow instructions: Make sure to observe all rules
and provisions in this instruction manual. Do not allow
anybody who is not familiar with the contents of this
manual to operate the appliance.
• Use common sense: These instructions are not
intended to cover every possible condition and
situation. As with any electrical household appliance,
common sense and caution are therefore always
recommended when installing, operating and
maintaining the oven. Be careful not to come in
contact with the internal heating elements.
• Usage restriction: This appliance is not intended
for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Supervise children: Young children do not recognise
the risks involved when using electrical appliances.
Make sure children younger than 8 years of age are
kept away from the appliance during use and after
use. If it is necessary for younger family members to
be in the kitchen, ensure that they are kept under
close supervision at all times. Never allow children to
play with or climb on the oven or oven door.
• Unattended: Never leave the appliance unattended
during use, as this is a fire risk. Oils and fats in
roasting dishes may catch fire due to overheating.
• No heater: Do not use the appliance for heating a
General Safety Instructions

5
room or drying clothes. This appliance must not be
used as a space heater.
• No external timer: The appliance is not intended
to be operated by means of an external timer or
separate remote control system.
• After use: Make sure to switch off the oven after use
and before cleaning.
• Damage: Do not use the appliance if any part has
been damaged or does not work properly. Only
have it repaired by an authorised service centre.
Incorrect repair could expose you to the risk of electric
shock, fire or injury. Prolonged use of the unit in such
conditions could cause fire or electrocution. In case of
damage, contact our after sales support centre using
the details at the bottom of this page.
• Liability: We assume no liability for any eventual
damages caused by misuse of the product or
noncompliance with these instructions.
• Do not use when faulty: Do not use the appliance in
the event of a technical fault. Any faults must be fixed
by an appropriately qualified and authorised person.
Contact our after sales support line for advice.
• No storage: Do not store flammable materials in the
appliance or near this appliance.
• No Aerosols: Do not spray aerosols in the vicinity of
this appliance while it is in operation.
• Cleaning: Clean the oven and cooktop on a regular
basis so oils and fats do not accumulate and cause
a fire risk. Make sure the appliance is switched off
before cleaning. Do not use harsh abrasive cleaners
or metal scrapers to clean the oven door glass as
this can scratch the surface, which may result in the
oven glass shattering. Do not use steam cleaning
equipment for cleaning any part of the appliance.
When cleaning the appliance, ensure that no part is
immersed in water or other liquid.
• Do not remove the plug by pulling on the cable.
OVENSPECIFIC SAFETY ADVICE
• Oven door: Do not place heavy objects on the oven
door. Do not lean on the oven door when it is open, as
this can damage the door hinges.
• Grill: Keep the oven door closed when using the grill
function.
• Oven cavity: During cooking, never place pans, trays
or other cookware directly onto the bottom of your
oven, including any dishes with water or ice. Always
place them on the shelves provided.
• Oven accessories: When removing the baking/drip
tray or oven rack from the hot oven, always use an
oven mitt.
• Aluminium foil: Do not use aluminium foil to cover
the grill pan or heat items wrapped in aluminium foil
under the grill. The high reflectivity of the foil could
potentially damage the grill element. You should also
never line the base of your oven with aluminium foil-
the trapped heat can irreversibly damage the enamel
and may even cause a fire.
• Do not line the oven with foil or place anything on the
bottom of the oven while baking to avoid permanent
damage, as trapped heat will crack or damage the
enamel floor of the oven cavity.
• Use all of the oven functions with the oven door
closed.
• Do not use plastic wrap or wax paper in the oven.
• For food safety reasons, do not leave food in the
oven for longer than two hours before and after
cooking or defrosting. This is to avoid contamination
by organisms which may cause food poisoning. Take
particular care during warmer weather. In the event
of power failure while cooking, return the oven dials in
off position to prevent overheating of the appliance.
• Lifting/moving: Do not attempt to lift or move the
oven by using the oven door or handle, as this may
cause damage to the appliance or result in injury to
the person lifting the appliance.
COOKTOPSPECIFIC SAFETY ADVICE
• Do not allow pots to boil dry, as damage to heating
elements or the hob itself may result.
• Do not operate cooktop heating elements without a
pot, fry pan, etc.
• Do not use pots or pans with unstable or deformed
bases to avoid an accident.
• Do not allow cookware to overhang the hob onto
adjacent bench tops as this may cause scorching to
the bench top surface.
• After a burner is extinguished, turn the control knob
to the off position and wait at least one minute
before relighting the burner.
42
WARRANTY TERMS & CONDITIONS
OVENS (FREESTANDING COOKERS)
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of this
warranty has the same meaning referred to in the
ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL
and includes a situation when an Appliance cannot
be repaired or it is uneconomic for Residentia Group,
at its discretion, to repair an Appliance during the
Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not
having purchased the Appliance for re-sale, and
‘your’ has a corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment
and subject to these terms and conditions, repair or
replace any parts which it considers to be defective.
Residentia Group or its ASR may use remanufactured
parts to repair your Appliance. You agree that any
replaced Appliances or parts become the property
of Residentia Group. This warranty does not apply
to light globes, batteries, filters or similar perishable
parts.
4. Parts and Appliances not supplied by Residentia
Group are not covered by this warranty.
Warranty Information
Possibility of tilting
Anti-tip restraint

6
CAUTION: Hot!
• Do not touch hot surfaces:
The heating elements and other
accessible parts including inside
the oven cavity and on the cooktop
become extremely hot during
operation and can cause burns on
contact. Take care when handling
the food you are cooking to avoid
touching hot parts inadvertently.
Keep young children well away when
using the appliance.
• Opening the door: Be careful
when opening the oven door to avoid
contact with hot parts of
the oven and steam.
WARNING: Do not spray aerosols in
the vicinity of this appliance while it is in operation. Do
not store or use flammable liquids or items in the vicinity
of this appliance.
WARNING: Where this appliance is installed in Marine
Craft or in Caravans, it shall not be used as a space
heater.
WARNING: Please ensure the appliance is secured
using the safety stabilising chain, as per the installation
instructions.
WARNING: Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass as they can
easily scratch and damage the surface, which can also
result in shattering the glass.
WARNING: Never use the storage compartment at the
base of the Cooker for storing any flammable items or
objects that cannot withstand heat (including but not
limited to timber, paper, spray cans, rags, etc).
DECLARATION OF CONFORMITY
This appliance complies with the following Australian/
European Directives:
• 2006/95/CE General regulations / Low tension
• 1935/2004/CE 90/128/EEC This appliance is suitable
to come in contact with food
• 2004/108/CE Electromagnetic compatibility
• Low voltage – 73/23
• Safety standards AS/NZS 60335.2.6:2014+A1 with AS/
NZS 60335.1:2011+A1+A2+A3+A4
• 2009/142/EC Gas Appliance Directive
The manufacturer declares that the oven is built using
certified materials and requires the appliance to be
installed in accordance with the standards currently in
force. This oven should only be used by a trained person
and for domestic purposes only.
OTHER REPAIRS OR SERVICE INSPECTIONS
Besides keeping the appliance clean, regularly inspect
the control dials and heating elements. In case of
damage, or if you experience any problems with the
appliance, contact our after sales support line to
arrange a technical inspection of the oven and fix any
operational faults.
WARNING:
Do not attempt to carry out any repairs yourself!
RESPONSIBLE DISPOSAL
At the end of their working life, do not throw the
appliance out with your household rubbish. Electrical
and electronic products contain substances that can
have a detrimental effect on the environment and
human health if disposed of inappropriately. Observe
any local regulations regarding the disposal of electrical
consumer goods and dispose of it appropriately for
recycling. Contact your local authorities for advice on
recycling facilities in your area.
According to Waste of Electrical and Electronic Equipment
(WEEE) directive, WEEE should be separately collected and
treated. If at any time in future you need to dispose of this
product please do NOT dispose of this product with household
waste. Please send this product to WEEE collecting points
where available.
It is forbidden to run the unit without any food inside.
It is very dangerous.
Trouble shooting
PN:P000 0024274040
General Safety Instructions (Continued)

7
GGSUC908S
The images and diagrams in this user manual is for reference only. Your Freestanding Cooker may appear differently.
Oven Temperature Knob
Oven Function Selector Knob
Gas Burner Knobs
Digital Timer
Minus Button ( – )
DIGITAL TIMER PANEL
Alarm Icon
Plus Button ( + )
Timer Button
Your Freestanding Cooker
9
INSTRUCTIONS
FOR
USE
OF
CONTROL
DEVICES
(Depending on model)
USlNG THE GRILL
The grill is situated in the top of the oven compartment.
The grill pan should be located on the top oven shelf position.
Always grill with the door closed.
Warning:
Do not place fatty foods too close to the grill and never leave the
grill unattended. If fatty foods are grilled, or roasting has been
cooked in the oven at a high temperature the grill element may
smoke. This is not dangerous and the smoke is caused by the fat
burning off when the grill element is hot. Leave the grill element
on until the smoking has stopped t-hen use as normal. If a grease
fire should occur in a pan put out the flame by placing a lid on the
pan. Do not throw water on a grease fire.
Using the prograa mmer of cc ooking
Main functions (for some models)
1，Time function, keep the time in 24 hours.
2，Make an reservation for the oven work
time, and can set anytime in 24 hours.
3，Set the oven work time, the longest maybe 10 hours.
Operation Panel and Instructions (for some models)
1 List of functions
Instructions from left to right: Key1, Key2, Key3.
Key1 Decrease Key
Key2 Mode Key
Key3 Increase Key
Note: Press Key 1 and Key 3 under the setting mode, which
changes the time by one minute either up or down. If keep
pressing them, the number will be up or down quickly.
2 Icon Instructions
“"Auto-programming icon" : it will flash when setting automatic
program and the end of automatic program. If automatic program
has been set, after 5s, it will keep lighting up. At the end of
automatic program, the flash will be off when resetting the clock
or it will keep lighting up when resetting automatic program after 5s.
“"Time-setting Icon" will flash when setting Beijing time.
“ "Sec Icon" and "Alarm Icon"”are flashing under the mode of time
setting and alarm setting, after 5s of setting, it will turn to lighting up.
Alarm Icon
Rela
y
O
p
eration Icon
Auto-programming
icon
Time-setting
Icon
Sec Icon
Number Display
Fig.
3
“"Relay Operation Icon"”shows the working state of relays. The
if contacts are disconnected. "Number Display"”is LED Nixie Tube.
As shown in the picture, on-off control is used to control heating
components of oven, the left is power source which can be
connected under the 220V.
1、、Time Adjustment after Starting up
When the power is on, it shows 12:00 and flashes. The relay
contact is disconnected, auto-programming icon keeps lighting
up, time setting icon flashes.
Press K1 or K3 to the time or press K2 to get into the present
working mode. The relay contact is connected.
Press K2 by 4 times to get into the present time-setting mode
under the common mode.
2、、Alarm and Buzz Function
Press K2 once under the common mode: "Alarm Icon" flashes.”
Press K1 or K3 to adjust the present alarm clock.
5s after adjusting to the time you need, "Alarm Icon" keeps
flashing, and will work after setting up. In this case, pressing
K1 can know the alarming time( it will show seconds at one
last minute).
When alarm counts down to zero, alarming program ends,
alarm icon flashes, and the buzzer os buzzing. Press any
key to stop the buzzing or it will turn off automatically after 2
minutes.
3、、Auto-programming Setting and Instructions
①Semiautomatic program mode
Use this setting for oven working time, automatic heating
switch-off at the end of setting time, buzzer will inform the user.
on-off control
Power source
icon will keep lighting up if contact are connected, and will be off
Control Function and Intructions
Press K2 twice or three times to get into the auto-programming
time setting, "Auto-programming Icon"” flashes. Press K1 and
K3 to aujust continuous time and end time.
5s after setting, it will work automatically, "Auto-programming
Icon" keeps lighting up. If continuous time is 0, turn off the
relay contact, and "Relay Operation Icon" is dark, "Auto-
programming Icon" flashes, the buzzer is buzzing.
This mode’s range of continuous time and end time:
Adjustment range for continuous time: ＞＞0 but ≤≤10 hours
Adjustment range for end time: present time ＜＜end time
＝＝present time + 10 hours
If meet this standard: end time = present time + continuous time
＜＜
＝＝
Cooking Icon
AUTO Programming Icon
Time setting Icon

8
COOKING FUNCTIONS
Light
This will activate the two internal lights.
No heating elements will be activated.
Defrost
The fan distributes air at ambient temperatures
inside the oven for defrosting food evenly and
efficiently.
Bake (also known as Conventional)
Heat will come from both the upper and lower
elements. The fan is not used in this function. Ideal
for cakes and foods that require baking for a long
time or at low temperatures. This function is not
ideal for multiple shelf cooking.
Fan Assisted Multi-level Oven
Prepare a range of similar or different foods at once
using this function.
Fan Forced
By using the central rear heating element and
fan, hot air is blown into the cavity and circulated
providing a consistent temperature at all levels.
Ideal for multiple shelf cooking.
Note: If converting a recipe from Bake to Fan
Forced, we recommend that you decrease the bake
time or temperature by approximately 20ºC.
Lower Element
Cooking using the lower element. Ideal for cooking
pastry based dishes by cooking the lower section
of your food quicker than the top. Use this for flans,
quiches, tarts and any cooking that requires greater
heat radiation from below.
Grill
This function uses intense heat from the upper Grill
element. This is the most ideal function for finishing
off many meals (i.e. browning the top of a roast,
frittata or potato gratin).
Note: For best results allow 5 minutes of
pre-heating before placing any food into the oven.
Ensure your dish is centered under the grill element.
Also ensure the temperature is between 50 and
grill.
Full Grill
Powerful grilling using both upper grill elements.
This is the most ideal function for finishing off many
meals (i.e. browning the top of a roast, frittata or
potato gratin).
Note: For best results allow 5 minutes of
pre-heating before placing any food into the oven.
Ensure your dish is centered under the grill element.
Also ensure the temperature is between 50 and
grill.
Fan Assisted Grill
Fan combined with the upper element and grill
element. This function uses the intense heat from
the two upper elements for top browning and the
fan to ensure even cooking of the food. Ideal for
meat, poultry and vegetables, leaving the food
crisp and brown on the outside whilst the inside
remains moist and tender (i.e. Whole chicken, beef
fish or even steak).
USING THE GRILL
The grill is situated in the top of the oven compartment.
The grill pan should be located on the top oven shelf
position. Always grill with the door closed.
Warning: Do not place fatty foods too close to the grill
and never leave the grill unattended. If fatty foods are
grilled, or roasting has been cooked in the oven at a high
temperature the grill element may smoke. This is not
dangerous and the smoke is caused by the fat burning
off when the grill element is hot. Leave the grill element
on until the smoking has stopped then use as normal.
If a grease fire should occur in a pan put out the flame
by placing a lid on the pan. Do not throw water on
a grease fire.
Your Freestanding Cooker (Continued)

9
CLOCKTIMER DISPLAY AND CONTROLS
Your freestanding oven features a digital display, 24 hour
clock/timer, with 3 buttons. The time will be displayed in
24 hours. When power is first connected the screen will
display “AUTO”.
Setting the digital clock
You need to set the clock in order to use the oven.
For first time use and for each time the cooker is reset by
the mains, press the function button ‘ ’ to remove the
Time Setting Icon. Then set the correct time by pressing
the ‘+’ or ‘–’ buttons, advancing forward or backward until
the correct time is displayed.
Semi Automatic operation setting
You can use the timer function to set an automatic
cooking duration. The oven will switch itself off after the
automatic cooking time period ends.
1. Press the ‘ ’ button twice and the AUTO icon will
flash, then enter the desired cooking duration using
the '+' and '–' buttons to set the cooking duration ie. if
you want to cook for 1.5 hours, set the display to 1:30.
2. After 5 seconds the timer will be set and the AUTO
icon will display and the timer will start counting
down.
3. Once the automatic cooking time is over the oven
will switch off, the cooking icon will switch off and the
AUTO icon will flash and the buzzer will sound.
Automatic operation setting
You can use the timer function to set an automatic end
time for your oven and a cooking duration. The oven will
then switch on and cook according to the timer and then
once finished, switch off automatically.
1. Press the ‘ ’ button twice and the AUTO icon will
flash, then enter the desired cooking duration using
the '+' and '–' buttons to set the cooking duration ie. 3
hours, set the display to 3:00.
2. Then press ‘ ’ button again to enter the desired
end time for your cooking. ie. if you want your
cooking to end at 10:00 set the time to 10:00.
3. After 5 seconds the timer will be set and the AUTO
icon will display until it is time to start cooking. When
it is time to start cooking the oven will automtically
switch on and start heating up. The cooking icon will
display on the screen for the duration of the cooking
program.
4. Once the automatic cooking time is over the oven
will switch off, the cooking icon will switch off and the
AUTO icon will flash and the buzzer will sound.
Cancel Functions
When in semiautomatic or automatic functions press the
'+' and '–' buttons at the same time which can cancel the
timer modes.
Timer (Alarm/ Buzzer mode)
The digital countdown timer can be set up to 23 hours
and 59 minutes.
To set the timer, press the ‘ ’ button and the alarm
icon will flash on the display screen. Press the ‘+’ or ‘–’
buttons to set your desired time within 5 seconds.
The alarm icon will display on the screen to show the
timer is set.
Press the ‘–’ button at any time to show the time
remaining on the display screen.
When your set timer reaches 0, the alarm will ring.
To stop the alarm, simply press any of the two buttons.

10
FIRST USE
IMPORTANT! Before first use:
• Remove all packaging and protective films
• Please ensure you have read all instructions in this
manual taking note of the safety instructions.
• Ensure the gas supply is turned on and that the
appliance is plugged in and switched on. .
Position your shelves
After removing any packaging or protective wraps,
re-install the shelves in your desired positions
Your Oven
The oven is fitted with:
• a lower heating element;
• an upper heating element;
• two circular heating element surrounding the fan.
N.B.: Always set the temperature on the thermostat knob
before selecting any of the functions.
Conditioning the oven
It is important to condition your oven before using it
for cooking and baking. Conditioning will burn off any
manufacturing residues and ensure that you get the best
results right from the start.
1. Ensure you have removed all packaging, cable ties
and protective wraps/inserts from the oven.
2. Ensure that all shelves and baking trays have been
re-installed into the oven.
3. Make sure that all oven control dials are switched
the Off position.
4. Use the Function selector knob to select the Bake
function. Then use the Oven Temperature knob
and set it to 200ºC.
5. After 30 minutes, use the Function selector knob to
select the Fan Grill function. Leave the temperature
set to 200ºC.
6. After a further 10 minutes, use the Function selector
knob to select the Fan Forced function and heat for
20 minutes at 200ºC.
7. After the final 20 minutes is up, turn both the
Function and Temperature knobs to the Off positions.
Note:
There will be a distinctive smell and a small amount of
smoke present during this conditioning process, as the
manufacturing residues are burnt off. This is normal, but
please make sure that the kitchen is well ventilated during
this process.
Important!
Once the oven has completely cooled, wipe out the
oven and warming drawer with a damp cloth and mild
detergent, followed by thoroughly drying.
Operating Instructions

11
GAS COOKTOP  INSTRUCTIONS FOR USE
Description of the main parts of the gas cooktop
DESCRIPTION OF SYMBOLS
Description of the burner areas of the gas cooktop
ACCESSORIES
The accessories can be inserted into the oven in 4
different shelf positions, see below.
Enamel Baking Tray
Deep Baking Dish
Flame Spreader
Flame Safety Device
Burner Head
Burner Caps
Cast Iron Trivets
Front Left Burner Front Right Burner Middle Wok Burner
Rear Left Burner Rear Right Burner
USE OF THE ELECTRIC GRILL
USlNG THE GRILL
Turn the oven knob to the right and place it on the grill position .
The grill pan should be located on the top oven shelf position.
Always preheat the grill on full for 3-5 minutes before inserting
the food.
The user can change the shelves, depending on his personal
whishes and on the different food.
To remove the shelves from the oven, pull them forward you,
tilt front end upward and pull them out.
To replace it in the opposite manner as before.
Install shelves by locating them in the horizontal guide rails on
the oven walls. The raised portion of the shelf is to be facing the
rear wall of the oven.
Bump
For example: the present time is 2: 00, then the max. end time
is adjusted to 12:00(2: 00＋10：00＝12：00). When the end time
is adjusted to 12:00, then the continuous time is 10:00.
5s after adjusted, automatic program is working. After 10 hours,
if continuous time is counting down to 0, turn off the relay
contact, and "Relay Operation Icon" is dark, "Auto-programming
Icon"”flashes, the buzzer is buzzing.
Note:
1. only use this setting for either continuous time or end time.
For example: the present time is 2:00, and if let the oven
work for 3 hours, set the continuous time to 3:00, and the
end time will automatically change to 5:00 and vice versa.
2. If the continuous time is equal to 0 or the end time is equal to
the present time, it means that the automatic program is over.
3. When the automatic program is over, the continuous time
is 0 and the end time is equal to the present time.
②Automatic Mode
Use this mode for setting oven’s starting time and end time,
which means make an appointment to boot. When the time is
over, it will automatically turn off the heating and the buzzer is
buzzing to inform the user.
Press twice to get into the continuous time setting mode under
the common mode, press three times to get into the end time
When the continuous time setting is ok or the end time setting
is ok, then press K2 to get into the other kind of automatic
program time setting, "Auto-programming Icon" flashes, ”
press K1 and K3 to ad just continuous time and end time.
setting mode.
5s after automatic program setting, it will automatically work,
and "Auto-programming Icon" keeps lighting up. Turn off the
relay conntact, and the icon is dark. When work until the
starting time, the relay contact is connected, the icon is light.
When the continuous time is counting down, if the continuous
time is 0,turn off the relay contact, "Relay Operation Icon" is dark,
"Auto-programming Icon" flashes, and the buzzer is buzzing.
The continuous time and the end time under this mode will be
set as follow: Starting time = end time - continuous time
For example, the present time is 2:00, set the continuous time to
3:00, and the end time to 10:00, then the starting time is 7:00
(7:00＝10:00－3:00). The relay contact is connected and its icon
is light. After working for continuous 3 hours, the continuous
time is 0, turn off the relay contact, "Relay Operation Icon" is dark,
“ "Auto-programming Icon"” flashes, the buzzer is buzzing.
Note:
1 End time＞present time+ continuous time,
but 23 hours and 59 minutes
For example: the present time is 2: 00, continuous time is 0:01,
then the range for end time is 2:02 (2:02
2:00+1).
2 Continuous time≥ 1 minute, continuous time and end time both
will be set.
3 If the continuous time is equal to 0 or the end time is equal to
the present time it meas the automatic program is over.
4 When the automatic program is over, the continuous time is 0,
and the end time is the same with the present time.
4、、Cancel Function
When semiautomatic or automatic function is starting, press K1
and K3 at the same time which can cancel the automatic mode.
( to cancel continuous time and end time).
＞
≤
≥
1
2
3
4
T
d
Y
w
r
Y
o
T
he access
o
d
ifferent she
Y
ou can pull
t
w
ithout the
m
r
emoved ea
s
Y
ou can buy
o
r from spec
Accessory
o
ries can be i
l
f positions.
t
he accesso
r
m
tipping. Thi
s
s
ily.
accessories
ialist retailer
s
i
nserted in t
h
r
ies two-thir
d
s
allows me
a
from the aft
e
s
.
Description
Baking an
d
For ovenwa
roasts, grilli
n
meals.
Enamelled
For moist c
a
frozen meal
s
roasts. Can
inserted un
d
wire rack or
used as a d
r
collect fat.
Rotary spi
t
For roasts a
of poultry. U
combinatio
n
enamelled
b
h
e oven in 4
s of the way
o
a
ls to be
e
r-sales serv
d
roasting s
h
re, cake tins,
n
g and froze
n
baking tray
a
kes, pastrie
s
s
and large
also be
d
erneath the
rotary spit a
n
r
ip tray to
nd large piec
se only in
n
with the
b
aking tray.
o
u
t
i
ce
elf
n
s
,
n
d
e
s
Accessories
T
d
Y
w
r
Y
o
T
he access
o
d
ifferent she
Y
ou can pull
t
w
ithout the
m
r
emoved ea
s
Y
ou can buy
o
r from spec
Accessory
o
ries can be i
l
f positions.
t
he accesso
r
m
tipping. Thi
s
s
ily.
accessories
ialist retailer
s
i
nserted in t
h
r
ies two-thir
d
s
allows me
a
from the aft
e
s
.
Description
Baking and roasting shelf
For ovenwa
roasts, grilli
n
meals.
Enamelled
For moist c
a
frozen meal
s
roasts. Can
inserted un
d
wire rack or
used as a d
r
collect fat.
Rotary spit
For roasts a
of poultry. U
combinatio
n
enamelled
b
h
e oven in 4
s of the way
o
a
ls to be
e
r-sales serv
re, cake tins,
n
g and froze
n
baking tray
a
kes, pastrie
s
s
and large
also be
d
erneath the
rotary spit a
n
r
ip tray to
nd large piec
se only in
n
with the
b
aking tray.
o
u
t
i
ce
n
s
,
n
d
e
s
10
1
2
3
4
USE OF THE ELECTRIC GRILL
USlNG THE GRILL
Turn the oven knob to the right and place it on the grill position .
The grill pan should be located on the top oven shelf position.
Always preheat the grill on full for 3-5 minutes before inserting
the food.
The user can change the shelves, depending on his personal
whishes and on the different food.
To remove the shelves from the oven, pull them forward you,
tilt front end upward and pull them out.
To replace it in the opposite manner as before.
Install shelves by locating them in the horizontal guide rails on
the oven walls. The raised portion of the shelf is to be facing the
rear wall of the oven.
Bump
For example: the present time is 2: 00, then the max. end time
is adjusted to 12:00(2: 00＋10：00＝12：00). When the end time
is adjusted to 12:00, then the continuous time is 10:00.
5s after adjusted, automatic program is working. After 10 hours,
if continuous time is counting down to 0, turn off the relay
contact, and "Relay Operation Icon" is dark, "Auto-programming
Icon"”flashes, the buzzer is buzzing.
Note:
1. only use this setting for either continuous time or end time.
For example: the present time is 2:00, and if let the oven
work for 3 hours, set the continuous time to 3:00, and the
end time will automatically change to 5:00 and vice versa.
2. If the continuous time is equal to 0 or the end time is equal to
the present time, it means that the automatic program is over.
3. When the automatic program is over, the continuous time
is 0 and the end time is equal to the present time.
②Automatic Mode
Use this mode for setting oven’s starting time and end time,
which means make an appointment to boot. When the time is
over, it will automatically turn off the heating and the buzzer is
buzzing to inform the user.
Press twice to get into the continuous time setting mode under
the common mode, press three times to get into the end time
When the continuous time setting is ok or the end time setting
is ok, then press K2 to get into the other kind of automatic
program time setting, "Auto-programming Icon" flashes, ”
press K1 and K3 to ad just continuous time and end time.
setting mode.
5s after automatic program setting, it will automatically work,
and "Auto-programming Icon" keeps lighting up. Turn off the
relay conntact, and the icon is dark. When work until the
starting time, the relay contact is connected, the icon is light.
When the continuous time is counting down, if the continuous
time is 0,turn off the relay contact, "Relay Operation Icon" is dark,
"Auto-programming Icon" flashes, and the buzzer is buzzing.
The continuous time and the end time under this mode will be
set as follow: Starting time = end time - continuous time
For example, the present time is 2:00, set the continuous time to
3:00, and the end time to 10:00, then the starting time is 7:00
(7:00＝10:00－3:00). The relay contact is connected and its icon
is light. After working for continuous 3 hours, the continuous
time is 0, turn off the relay contact, "Relay Operation Icon" is dark,
“ "Auto-programming Icon"” flashes, the buzzer is buzzing.
Note:
1 End time＞present time+ continuous time,
but 23 hours and 59 minutes
For example: the present time is 2: 00, continuous time is 0:01,
then the range for end time is 2:02 (2:02
2:00+1).
2 Continuous time≥ 1 minute, continuous time and end time both
will be set.
3 If the continuous time is equal to 0 or the end time is equal to
the present time it meas the automatic program is over.
4 When the automatic program is over, the continuous time is 0,
and the end time is the same with the present time.
4、、Cancel Function
When semiautomatic or automatic function is starting, press K1
and K3 at the same time which can cancel the automatic mode.
( to cancel continuous time and end time).
＞
≤
≥
1
2
3
4
T
d
Y
w
r
Y
o
T
he access
o
d
ifferent she
Y
ou can pull
t
w
ithout the
m
r
emoved ea
s
Y
ou can buy
o
r from spec
Accessory
o
ries can be i
l
f positions.
t
he accesso
r
m
tipping. Thi
s
s
ily.
accessories
ialist retailer
s
i
nserted in t
h
r
ies two-thir
d
s
allows me
a
from the aft
e
s
.
Description
Baking an
d
For ovenwa
roasts, grilli
n
meals.
Enamelled
For moist c
a
frozen meal
s
roasts. Can
inserted un
d
wire rack or
used as a d
r
collect fat.
Rotary spi
t
For roasts a
of poultry. U
combinatio
n
enamelled
b
h
e oven in 4
s of the way
o
a
ls to be
e
r-sales serv
d
roasting s
h
re, cake tins,
n
g and froze
n
baking tray
a
kes, pastrie
s
s
and large
also be
d
erneath the
rotary spit a
n
r
ip tray to
nd large piec
se only in
n
with the
b
aking tray.
o
u
t
i
ce
elf
n
s
,
n
d
e
s
Accessories
T
d
Y
w
r
Y
o
T
he access
o
d
ifferent she
Y
ou can pull
t
w
ithout the
m
r
emoved ea
s
Y
ou can buy
o
r from spec
Accessory
o
ries can be i
l
f positions.
t
he accesso
r
m
tipping. Thi
s
s
ily.
accessories
ialist retailer
s
i
nserted in t
h
r
ies two-thir
d
s
allows me
a
from the aft
e
s
.
Description
Baking and roasting shelf
For ovenwa
roasts, grilli
n
meals.
Enamelled
For moist c
a
frozen meal
s
roasts. Can
inserted un
d
wire rack or
used as a d
r
collect fat.
Rotary spit
For roasts a
of poultry. U
combinatio
n
enamelled
b
h
e oven in 4
s of the way
o
a
ls to be
e
r-sales serv
re, cake tins,
n
g and froze
n
baking tray
a
kes, pastrie
s
s
and large
also be
d
erneath the
rotary spit a
n
r
ip tray to
nd large piec
se only in
n
with the
b
aking tray.
o
u
t
i
ce
n
s
,
n
d
e
s
10
1
2
3
4
USE OF THE ELECTRIC GRILL
USlNG THE GRILL
Turn the oven knob to the right and place it on the grill position .
The grill pan should be located on the top oven shelf position.
Always preheat the grill on full for 3-5 minutes before inserting
the food.
The user can change the shelves, depending on his personal
whishes and on the different food.
To remove the shelves from the oven, pull them forward you,
tilt front end upward and pull them out.
To replace it in the opposite manner as before.
Install shelves by locating them in the horizontal guide rails on
the oven walls. The raised portion of the shelf is to be facing the
rear wall of the oven.
Bump
For example: the present time is 2: 00, then the max. end time
is adjusted to 12:00(2: 00＋10：00＝12：00). When the end time
is adjusted to 12:00, then the continuous time is 10:00.
5s after adjusted, automatic program is working. After 10 hours,
if continuous time is counting down to 0, turn off the relay
contact, and "Relay Operation Icon" is dark, "Auto-programming
Icon"”flashes, the buzzer is buzzing.
Note:
1. only use this setting for either continuous time or end time.
For example: the present time is 2:00, and if let the oven
work for 3 hours, set the continuous time to 3:00, and the
end time will automatically change to 5:00 and vice versa.
2. If the continuous time is equal to 0 or the end time is equal to
the present time, it means that the automatic program is over.
3. When the automatic program is over, the continuous time
is 0 and the end time is equal to the present time.
②Automatic Mode
Use this mode for setting oven’s starting time and end time,
which means make an appointment to boot. When the time is
over, it will automatically turn off the heating and the buzzer is
buzzing to inform the user.
Press twice to get into the continuous time setting mode under
the common mode, press three times to get into the end time
When the continuous time setting is ok or the end time setting
is ok, then press K2 to get into the other kind of automatic
program time setting, "Auto-programming Icon" flashes, ”
press K1 and K3 to ad just continuous time and end time.
setting mode.
5s after automatic program setting, it will automatically work,
and "Auto-programming Icon" keeps lighting up. Turn off the
relay conntact, and the icon is dark. When work until the
starting time, the relay contact is connected, the icon is light.
When the continuous time is counting down, if the continuous
time is 0,turn off the relay contact, "Relay Operation Icon" is dark,
"Auto-programming Icon" flashes, and the buzzer is buzzing.
The continuous time and the end time under this mode will be
set as follow: Starting time = end time - continuous time
For example, the present time is 2:00, set the continuous time to
3:00, and the end time to 10:00, then the starting time is 7:00
(7:00＝10:00－3:00). The relay contact is connected and its icon
is light. After working for continuous 3 hours, the continuous
time is 0, turn off the relay contact, "Relay Operation Icon" is dark,
“ "Auto-programming Icon"” flashes, the buzzer is buzzing.
Note:
1 End time＞present time+ continuous time,
but 23 hours and 59 minutes
For example: the present time is 2: 00, continuous time is 0:01,
then the range for end time is 2:02 (2:02
2:00+1).
2 Continuous time≥ 1 minute, continuous time and end time both
will be set.
3 If the continuous time is equal to 0 or the end time is equal to
the present time it meas the automatic program is over.
4 When the automatic program is over, the continuous time is 0,
and the end time is the same with the present time.
4、、Cancel Function
When semiautomatic or automatic function is starting, press K1
and K3 at the same time which can cancel the automatic mode.
( to cancel continuous time and end time).
＞
≤
≥
1
2
3
4
T
d
Y
w
r
Y
o
T
he access
o
d
ifferent she
Y
ou can pull
t
w
ithout the
m
r
emoved ea
s
Y
ou can buy
o
r from spec
Accessory
o
ries can be i
l
f positions.
t
he accesso
r
m
tipping. Thi
s
s
ily.
accessories
ialist retailer
s
i
nserted in t
h
r
ies two-thir
d
s
allows me
a
from the aft
e
s
.
Description
Baking an
d
For ovenwa
roasts, grilli
n
meals.
Enamelled
For moist c
a
frozen meal
s
roasts. Can
inserted un
d
wire rack or
used as a d
r
collect fat.
Rotary spi
t
For roasts a
of poultry. U
combinatio
n
enamelled
b
h
e oven in 4
s of the way
o
a
ls to be
e
r-sales serv
d
roasting s
h
re, cake tins,
n
g and froze
n
baking tray
a
kes, pastrie
s
s
and large
also be
d
erneath the
rotary spit a
n
r
ip tray to
nd large piec
se only in
n
with the
b
aking tray.
o
u
t
i
ce
elf
n
s
,
n
d
e
s
Accessories
T
d
Y
w
r
Y
o
T
he access
o
d
ifferent she
Y
ou can pull
t
w
ithout the
m
r
emoved ea
s
Y
ou can buy
o
r from spec
Accessory
o
ries can be i
l
f positions.
t
he accesso
r
m
tipping. Thi
s
s
ily.
accessories
ialist retailer
s
i
nserted in t
h
r
ies two-thir
d
s
allows me
a
from the aft
e
s
.
Description
Baking and roasting shelf
For ovenwa
roasts, grilli
n
meals.
Enamelled
For moist c
a
frozen meal
s
roasts. Can
inserted un
d
wire rack or
used as a d
r
collect fat.
Rotary spit
For roasts a
of poultry. U
combinatio
n
enamelled
b
h
e oven in 4
s of the way
o
a
ls to be
e
r-sales serv
re, cake tins,
n
g and froze
n
baking tray
a
kes, pastrie
s
s
and large
also be
d
erneath the
rotary spit a
n
r
ip tray to
nd large piec
se only in
n
with the
b
aking tray.
o
u
t
i
ce
n
s
,
n
d
e
s
10
1
2
3
4

12
IGNITION AND OPERATION OF THE BURNERS
To light the burner, press the control knob fully down and
hold the knob down before rotating anti-clockwise to
the High Flame position. The ignition device is integrated
into the control knob and is automatically activated by
pushing down on the control knob.
After lighting the flame, keep the knob pressed for
about 10 seconds: this time is necessary to heat up the
thermocouple and activate the safety valve, which would
otherwise cut off the gas flow. This step only applies
where flame failure device is fitted.
In the instance of a power failure, place a lit match near
the burner and proceed as described above. If the flame
does not light after the first attempt, wait 5 minutes for
the gas to dissipate before attempting to re-light the
burner.
Once lit, check that the flame is even and turn the control
knob to adjust the flame as required. If the flame is
uneven, check that the 'burner head/skirt' and 'burner
cap' are correctly positioned. To turn off the flame, turn
the control knob clockwise to the off position. Before
removing pots or pans from the burners, always turn off
the flame.
For correct use of the cooktop
For lower gas consumption and better efficiency, use
only flat bottomed pans of dimensions suitable for the
burners, as shown in the table below. Also, as soon as a
liquid comes to the boil take care to turn the flame down
to a level that will just keep it boiling.
Burner min Saucepan max Saucepan
Auxilliary 80mm 160mm
Semi-rapid 120mm 200mm
Rapid 200mm 230mm
Triple crown 230mm 260mm
Operating Instructions (Continued)

13
This page
is intentionally
left blank

14
Baking
• For best results when baking, always preheat your
oven to the desired temperature. The temperature
indicator light will switch off to indicate that the set
temperature has been reached.
• We advise you do not open the door until at least ¾
of the way through cooking.
• Make sure cake pans do not touch each other or the
sides of the oven.
• If you are doubling the baking recipe (especially
cookies), the cooking duration may need to increase.
• Your cookware will significantly influence baking
times. Dark pans absorb the heat more quickly than
reflective pans; glass cookware may require a lower
temperature.
• Where you are baking using multiple shelves, you
may require a slight increase in cooking time.
Shelf Position Guide
• Single shelf: place your baking on a wire rack that will
have the top of your pan near the center of the oven
cavity, for optimum results.
• Multiple shelves: always leave a space between
shelves to allow the air to circulate.
Roasting
• The Roast (or Fan + Grill) function is designed to
brown the outside of the meat but still keep the inside
moist and juicy.
• Boneless, rolled or stuffed roasts take longer than
roasts containing bones.
• Poultry should be well cooked with the juices running
clear and an internal temperature of 74°C.
• If using a roasting bag, do not use the Roast function.
The initial searing stage is too hot for roasting
bags. Use Fan Bake or Fan Forced and follow the
manufacturer’s instructions.
• When using the Roast function, do not cover your
roast, as this will stop the searing process browning
the outside of the meat. If you prefer to roast in a
covered pan, use the Fan Bake function instead and
increase the temperature by 20°C.
• Cook larger cuts of meat at a lower temperature for a
longer time. The meat will cook more evenly.
• Always roast meat fat side up. That way, basting may
not be required.
• Always rest the meat for at least 10 minutes after
roasting to allow the juices to settle.
• Remember the meat will continue to cook for a few
minutes after removing it from the oven.
Shelf Position Guide
• Place the meat on a shelf so that it is in the center
of the oven or lower.
Grilling
• This is a healthier alternative to frying.
• Always grill with the oven door completely shut.
• For best results allow 5 minutes of preheat before
placing food in the oven.
• If you use glass or ceramic pans, be sure they can
withstand the high temperatures of the grill.
• To avoid piercing the meat and letting juices escape,
use tongs or a spatula to turn the meat halfway
through cooking.
• Brush meat with a little oil to help keep the meat
moist during cooking. Alternatively marinade
the meat before grilling (but be aware that some
marinades may burn easily).
• Where possible grill cuts of meat of a similar thickness
at the same time. This will ensure even cooking.
• Always keep a close watch on your food while grilling
to avoid charring or burning.
Shelf Position Guide
• For thinner cuts of meat, toasting or browning foods,
use a higher shelf position.
• Thicker cuts of meats should be grilled on lower
shelves or at a lower grill setting to ensure even
cooking.
Reheating food
• Use Bake or Fan Bake to reheat food.
• Bake and Fan Bake are particularly good for
reheating pastry based items, as the base heat will
help re-crisp the pastry case.
• Always reheat food to piping hot. This reduces the risk
of contamination by harmful bacteria.
• Once hot, set the oven temperature to WARM or use
the warming drawer to keep food hot.
• Never reheat food more than once.
Cooking Guidelines

15
This page
is intentionally
left blank

16
Important!
Do not use steam cleaners on your appliance.
Important!
Before any cleaning or maintenance operation, use the
isolation switch to disconnect the appliance from its
power source.
Cleaning Do's
• Read these cleaning instructions and the ‘General
Safety Instructions’ section before you start cleaning
your cooker.
• Before cleaning or removing any part, make sure that
everything on the cooker has been turned off.
• Unless suggested otherwise in the chart following,
allow any part to cool to a safe temperature before
cleaning. If you do need to handle a warm or hot
part, take extreme care. Wear long protective mitts to
avoid burns from steam or hot surfaces.
• Try using any cleaner on a small area first, to ensure it
doesn’t stain.
• See the pages following this chart for instructions on
removing and replacing different parts of the cooker
for cleaning or maintenance.
• To help you identify any parts, see illustrations in
section ‘Your Freestanding Cooker’ and the Cleaning
Chart on page 17–19.
• Ensure the anti-tip device is re-engaged if you move
the cooker for cleaning. Failure to do this may result
in the oven tipping, and adults and children may
be killed.
• To prevent soiling from becoming ‘baked on’ and
stubborn, we recommend removing any easy-to
reach spills, food or grease stains from the oven cavity
enamel after each use.
Cleaning Don'ts
• Do not use aerosol cleaners until the cooker has
completely cooled. The propellant substance in these
cleaners could catch fire in the presence of heat.
• Do not let soiling or grease accumulate anywhere in
or on the cooker. This will make future cleaning more
difficult and may present a fire hazard.
• Do not use any abrasive or harsh cleaners, cloths,
scouring pads or steel wool. These will scratch your
cooker and damage its appearance.
• Do not use a steam cleaner to clean any part
of the cooker.
• Do not perform any cleaning or maintenance on
parts not specifically named in the chart below. If in
doubt, contact Customer Care on 1300 11 HELP (4357).
• Only an authorised service technician can take apart
the door- after training.
• Do not attempt to take the door apart for cleaning.
If the inner panes of glass in the door become dirty,
please contact your InAlto trained and supported
service technician or our After Sales Service team on
1300 11 HELP (4357).
Cleaning & Maintenance

17
Cleaning Chart
Component / Part Cleaning Method Important Notes
Freestanding
Oven Exterior
Door frame exterior,
Control panel,
Cooktop base,
Back trim,
Warming drawer
exterior,
After every use
1. Soften any stubborn stains under
a hot soapy cloth.
2. Clean with a solution of mild
detergent and hot water, then
wipe dry with a microfibre cloth.
Stainless steel models:
For extra shine, use a suitable
stainless steel cleaner and polish,
following manufacturer’s instructions.
Always rub the stainless steel in the
direction of the polish lines.
• Always read the label to make
sure your stainless steel cleaner
does not contain chlorine
compounds as these are corrosive
and may damage the appearance
of your cooktop.
• Do not use and take care not to
spill any stainless steel cleaner
on the dials, oven handles, or
the kickstrip grate. These are not
stainless steel parts and their
surface may be damaged by
stainless steel cleaner.
Dials & Oven
handles
1. Wipe with a damp cloth using
a solution of mild detergent and
hot water.
2. Dry thoroughly with microfiber
cloth.
Do not use stainless steel cleaner
on these parts, as doing so may
damage their coating.
Clock / Timer
Take particular care when cleaning
the clock and surrounding area.
Only use a damp cloth with
detergent.
Do not use any oven cleaners, harsh
or abrasive cleaners, scouring pads,
steel wool or sharp metal scrapers
on the glass.
These may scratch and damage
the surface.
Oven door glass
(exterior)
Clean using a soft cloth and
a mixture of warm water and
dishwashing liquid or glass cleaner.
—
Oven Interior
& Parts
Enamel oven interior
– light soiling
1. Wipe with a damp cloth using
a solution of mild detergent and
hot water.
2. Wipe dry with a soft cloth.
Note: The oven door may be
removed to make reaching into the
oven easier.
To prevent soiling from becoming
‘baked on’ and stubborn, we
recommend removing any easy to
reach spills, food or greasy stains
from the enamel after each use.
Enamel oven interior
– stubborn,
‘baked-on’ soiling
You may need to use an oven
cleaner.
Oven cleaners are caustic and
may permanently stain or damage
some surfaces.
When using, take care not to let it
come in contact with any surface
other than the oven interior.
If it accidentally does, remove
immediately.
Chrome Side Racks Clean with a solution of mild
detergent and hot water. —
Oven Shelves /
Wire Racks
Wipe with a damp cloth and
mild detergent.
Be careful cleaning any telescopic
rails/guides- Do not wipe off or wash
away the white lubricating grease
(visible when the shelf is extended)
Roasting dish and
grill rack
1. Pre-soak any stubborn soiling in
a solution of mild detergent and
hot water.
2.Wash by hand or in a dishwasher.
—

18
Cleaning Chart (Continued)
Component / Part Cleaning Method Important Notes
Oven Interior
& Parts
(Continued)
Grill elements Do not clean these parts.
They self-clean during normal use. —
Oven door glass
(interior)
• Use a soft cloth and a mixture
of warm water and dishwashing
liquid to remove light soiling after
every use.
• For stubborn stains, try using
a mixture of baking soda and
warm water with a non-abrasive
scrubbing pad, then wipe dry with
a soft, lint-free cloth.
• Do not use oven cleaners or any
other harsh/abrasive cleaners,
cloths, scouring pads, steel wool or
sharp metal scrapers to clean the
oven door glass. These scratch the
glass, which in turn could result in
the glass cracking and shattering.
• Do not allow grease to build up on
the glass or become baked on as
this reduces visibility into the oven.
• Only a trained and supported
service technician can take apart
the door.
• Do not attempt to take the door
apart for cleaning. If the inner
panes of glass in the door become
dirty, please contact our After Sales
Service team on 1300 11 HELP
(4357).
Oven door gasket
Avoid cleaning this part.
If you need to remove large food
particles off it, proceed as follows:
1. Dampen a sponge with clean
hot water.
2. Gently wipe off the soiling, but do
not rub.
3. Press a dry towel gently on the
gasket to dry.
• Do not use any cleaning agent
on the gasket.
• The gasket is essential for a good
seal. Take care not to rub, displace,
or damage it.
Warming drawer
(interior)
1. Wipe with a damp cloth and
a solution of hot water and
mild detergent.
2. Wipe dry with a soft cloth.
Note: The drawer may be removed
to make cleaning easier.
To prevent soiling from becoming
‘baked on’ and stubborn, we
recommend removing any easy to
reach spills, food or greasy stains
from the enamel after each use.
Cleaning & Maintenance (Continued)

19
Cleaning Chart (Continued)
Component / Part Cleaning Method Important Notes
Cooktop
Burner caps and
flame spreaders
1. Check that the burner is turned
OFF and allow it to cool.
2. Lift off the burner cap and brass
flame spreader.
3. Wash them in hot soapy water,
rinse, and dry.
4. Use a stiff nylon brush or straight-
ended paper clip to clear the
notches of the flame spreader.
5. Replace the flame spreader and
burner cap correctly.
Brass burner parts only:
For extra shine and to remove tarnish
use a suitable brass cleaner and
polish, following manufacturer’s
instructions.
• Keep the notches of the flame
spreaders clear. Soiling may clog
these and cause ignition problems.
• Before replacing the burner parts,
check that they are dry.
Wet burner parts may result in
an irregular flame.
• Before lighting a burner you have
reassembled, check that all of
its parts are positioned correctly.
Incorrect assembly can cause
dangerous irregular flames and
ignition problems.
• Do not put any burner parts in
the dishwasher as they will
become discoloured.
Ignitors
1. Check that the burner is turned
OFF.
2. Clean the ignitor with a small
brush (e.g. old toothbrush) or
cotton
swab that has been dipped into
rubbing alcohol.
The ignitors must be kept clean
and dry to work correctly. Dirty or
wet ignitors could cause constant
clicking and sparking, even if a flame
is present.
Trivets
1. Wait until the trivets have
cooled completely.
2. Carefully lift the trivets off the
cooktop and place them on a
protected surface.
3. To remove stubborn stains, soak
the trivets in a mixture of clothes
washing detergent and water.
4. Wash in a mixture of hot water
and dishwashing liquid, then rinse
and allow to dry.
Note: The trivets are dishwasher-
safe.
• Take care, the trivets are heavy
and can damage your cooktop
surface or benchtop if dropped or
dragged.
• Make sure you place a dishcloth
or other soft cover on the surface
before putting a trivet on it.

20
Removing the oven door
Important! Switch the oven off at the isolating switch
before removing the door.
• Do not lift the oven door by its handle. Doing so may
damage the door.
• Make sure the oven and the door are cool before you
begin to remove the door.
• Before removing the door, make sure there is a large
enough clear, protected surface in the kitchen to rest
the door on.
• Take care, the oven door is heavy!
Proceed as follows:
• Open the door to the full extent (Fig. 1);
• Open the lever A completely on the left and right side
hinges (Fig. 2);
• Hold the door in position as shown (Fig. 3);
• Gently close the door until left and right hinge levers
A are hooked to part B of the door (Fig. 4);
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Removing the chrome side racks
Important! Switch the oven off at the isolating switch
before removing the side racks.
• Ensure that the oven has completely cooled down
before starting.
• Open the oven door.
• Remove all shelves for either the oven (Fig. 5)
• Slightly squeeze the bottom two row of the runner
under the screw (Fig. 6).
• Whilst squeezing the bottom two rows, pull the runner
away from the side of the oven chamber (Fig. 6).
• To refit the runners follow these steps in reverse order.
Fig. 5
Fig. 6
18 page
•
•
•
•
how to remove the door
Unhooking the doors.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble
method according to different structure of oven door purchased.
Proceed as follows:
Open the door to the full extent (Fig.1);
Open the lever A completely on the left and right hinge (Fig.2);
Hold the door as shown (Fig.3);
Gently close the door until left and right hinge levers A are hooked to part B of the door (Dig.4);
Fig.1 Fig.2 Fig.3 Fig.4
A
B
Reassemble the door by following the above procedures backwards.
18 page
•
•
•
•
how to remove the door
Unhooking the doors.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble
method according to different structure of oven door purchased.
Proceed as follows:
Open the door to the full extent (Fig.1);
Open the lever A completely on the left and right hinge (Fig.2);
Hold the door as shown (Fig.3);
Gently close the door until left and right hinge levers A are hooked to part B of the door (Dig.4);
Fig.1 Fig.2 Fig.3 Fig.4
A
B
Reassemble the door by following the above procedures backwards.
18 page
•
•
•
•
how to remove the door
Unhooking the doors.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble
method according to different structure of oven door purchased.
Proceed as follows:
Open the door to the full extent (Fig.1);
Open the lever A completely on the left and right hinge (Fig.2);
Hold the door as shown (Fig.3);
Gently close the door until left and right hinge levers A are hooked to part B of the door (Dig.4);
Fig.1 Fig.2 Fig.3 Fig.4
A
B
Reassemble the door by following the above procedures backwards.
18 page
•
•
•
•
how to remove the door
Unhooking the doors.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble
method according to different structure of oven door purchased.
Proceed as follows:
Open the door to the full extent (Fig.1);
Open the lever A completely on the left and right hinge (Fig.2);
Hold the door as shown (Fig.3);
Gently close the door until left and right hinge levers A are hooked to part B of the door (Dig.4);
Fig.1 Fig.2 Fig.3 Fig.4
A
B
Reassemble the door by following the above procedures backwards.
How to remove the side racks
18 page
1.
2. Open the oven door.
To fit the runners follow the steps in reverse order.
Check the oven is cool and switched off.
3. Remove all shelves for either the oven (Fig. 8.3)
4. Slightly squeeze the bottom two row of the runner
under the screw. The oven (Fig. 8.4)
5. Whilst squeezing the bottom two row, pull the runner
away from the side of the oven chamber (Fig. 8.4).
6.
Fig. 8.3 Fig. 8.4
How to remove the side racks
18 page
1.
2. Open the oven door.
To fit the runners follow the steps in reverse order.
Check the oven is cool and switched off.
3. Remove all shelves for either the oven (Fig. 8.3)
4. Slightly squeeze the bottom two row of the runner
under the screw. The oven (Fig. 8.4)
5. Whilst squeezing the bottom two row, pull the runner
away from the side of the oven chamber (Fig. 8.4).
6.
Fig. 8.3 Fig. 8.4
Cleaning & Maintenance (Continued)