Solwise UltraSkyM18P1 User manual

Wireless Broadband Router
UltraSkyM18P1
Quick Installation Guide
1.Connecting the Router
2.
Configure Computer
3.
Login the Router
4.
Run Setup Wizard
5.
Wireless connecting for PC
1/12


1.Connecting the Router
1-1. Power on the router with the correct power adapter
1-2. Connect one end of the standard network cable to the router’s LAN port
and the other end to the network adapter of your computer.
1-3. Connect another network cable between ADSL modem and the router’s
WAN port.
2.Configure Computer
Follow the instructions below to configure a computer running Windows XP
2-1. From the Start menu on your desktop, go to Settings, and then click on
Network Connections.
2-2. In the Network Connections window, right-click on Local Area
Connection, then click Properties.
2-3. In the General tab of Local Area Connection Properties, Click
Internet Protocol (TCP/IP) under “This connection uses the following
items:”. Then click on the Properties button.
2/12


2-4. Select “Obtain an IP address automatically” and the “Obtain DNS
server address automatically” by clicking the radio-button. Click OK .
3.Login the Router
Input the website http://192.168.1.1 in Internet explorer address column,
User should see the login page, input the user name and password (default user
name and password is “admin”),login windows as below:
3/12


click “ok” button enter the Setup wizard page
4.Run Setup Wizard
Click “Setup Wizard” button and click “Next” show following window:
4/12


4.1 Operation Mode
The router support three kinds operation mode: Gateway, Bridge, wireless
ISP, system default is “Gateway”.
Recommend the Gateway mode for general user. Click “Next” button.
4.2 Time Zone Setting
5/12


You can maintain the system time by synchronizing with a public time server
over the Internet.
Recommend keep the default settings, Click “Next” button.
4.3 LAN Interface Setup
This page is used to configure the parameters for local area network. Here you
may change the setting for IP address, subnet mask.
Recommend keep the default settings, Click “Next” button
4.4 WAN Interface Setup
6/12


This page is used to configure the parameters for Internet network which
connects to the WAN port of your router. Here you may change the access
method to Static IP, DHCP, PPPoE, PPTP or L2TP by click the item value of
WAN Access type. Generally it is PPPOE for most of user.
4.4.1 If your access type is Static IP, It means you have static IP address ISP
supply, so you need to fill in follow details:
IP address: The router’s WAN IP address that the ISP supply, If you not
sure can check with ISP.
Subnet Mask: The router’s subnet mask that the ISP supply, normally it is
255.255.255.0.
Default Gateway: Fill in yours gateway that the ISP supply, if you not sure
can check with ISP.
DNS server: Fill in yours DNS server that ISP supply, if you not sure can
check with ISP.
7/12


4.4.2 If your access type is DHCP Client, then you can get the IP address from
the ISP.
4.4.3 If your access type is PPPoE, with ADSL virtual dialing, you need to fill in
following details:
User Name: Fill in ADSL access user name which supply by ISP, if you not sure
can check with ISP.
User password: Fill in ADSL access password which supply by ISP, if you not
sure can check with ISP.
8/12


4.4.4 If your access type is PPTP, please take following for reference.
4.4.5 If your access type is L2TP, please take following for reference.
Click “ Next” button
9/12


4.5 Wireless Basic Settings
This page is used to configure the wireless parameters.
Band: 2.4GHz(B+G+N).
Mode: AP.
Network Type: Infrastructure.
SSID: All-Link (default).
Channel Width: 40MHz(default)
ControlSideband: Upper(default)
Channel Number: 11(default)
Recommend keep the default setting, Click “Next” button.
10/12


4.6 Wireless Security Setup
Encryption: None(default), you can choose
WEP,WPA(TKIP),WPA2(AES),WPA2 MIXED Encryption method.
Click Finished to finish the settings.
Note: the router must be restart to take changes effect, So if you change some
settings from this guide, system can restart router automatically.
5.Wireless setting for PC
5-1. After finish the router setting, if you want to access internet with wireless
connecting. You must right-click Wireless Network Connection and select
the View Available Wireless
11/12


Networks .
5-2. click Refresh network list at left up place, it will search the wireless
network, select the wireless network you want to connect and click Connect .
12/12
