Sonic Modell P-51 Mustang User manual

User Manual for
P-51 Mustang R/C Model
Wingspan: 1200mm Length: 1065mm
Flying Weight: 1300g R/C: 2.4 GHz 6 Channel
Motor: Brushless 800KV ESC: 30A Brushless ESC
Battery: 11.1V 2200mah Lipo Servo: 9g * 4pcs
Propeller: 4 Blade prop.( 10*8) Material: Durable EPO
Control Panel Voltage: Less than 14.8V
Retract System: Servoless retractable landing gear system
www.sonicmodell.com
4
The CG of this model
Disclaimer of Liability
Note: The servos have not been installed in the main wing to avoid scrape inside the
package, please glue the servos when assemble the model.
※ For ages 14 and up. Keep the plane away from face, eyes and fingers.
Do not touch the rotating propellers at any time.
Do not fly the plane near people, animals,buildings, trees or overhead wires.
The user understands that any and all items in this product and their operations
including: motors, propellers, ESC, lithium batteries, servos, charger, transmitter and
receiver, and the combined systems and/or operations of these items/systems can be
dangerous if used or handled improperly.A thorough understanding is necessary before
the user handles the items and/or operates the systems in this product. SonicModell R/C
Hobby Co., LTD. cannot be responsible for any improper use or handling of this product
and its component items by the user. The user waives all claims of damages against
SonicModell R/C Hobby Co., LTD. for any and all damages arising from the use of this
product by the user, including, but not limited to, any bodily injuries or property
damages sustained as a direct or indirect result of the user ’s use of this product.
※
※
※

Installation Guide
Insert the strengthening stick into the main wing, then apply glue in the
connection surface of the left / right wing
Glue the both wings Glue the plastic part on the wing
2
Glue the elevator and rudder together
3
Glue the elevator and rudder to the fuselage
Assemble the propeller and make sure the nut is tightened
Install the spinner
Connect the plug in main wing and fuselage, then assemble the wing