Sonnen sonnenBatterie eco 7.0 Series User manual

+49 (0) 8304 / 92933 - 444 · [e-mail] · www.sonnenbatterie.de
sonnenBatterie eco 7.0
Operation and Installation Instructions
KD-262 · Part- o 52199 · Version 1.00

EN IMPORTANT
► Read this documentation carefully before installation.
► Retain this document for reference purposes.
Publisher
sonnen GmbH
Am Riedbach 1
87499 Wildpoldsried, Germany
Emergency ho line [phone]
Email info@sonnenba erie.de
Documen
Documen number KD-262
I em number 52199
Version 1.00
Publica ion da e 25.07.2016
Scope of validi y
This documen rela es o he following produc :
Produc designa ion sonnenBa erie eco 7.0
Page 2 of 115
KD-262 | Part-No 52199 | N | Version 1.00

Con en s
Contents
1 Information about this document.................................................................
1.1 Targe groups.........................................................................................................8
1.2 Designa ions in his documen ............................................................................8
1.3 Explana ion of symbols........................................................................................8
2 Safety..............................................................................................................9
2.1 In ended Use.........................................................................................................9
2.2 Requiremen s for he elec rician.......................................................................9
2.3 General safe y informa ion.................................................................................9
2.3.1 Danger due o incorrec opera ion............................................................9
2.3.2 Danger o life due o explosive and flammable ma erials......................10
2.3.3 Abou repairs on he s orage sys em......................................................10
2.3.4 Danger o life due o produc modifica ions or changes o he produc
environmen ........................................................................................................10
2.3.5 Conduc in case of a fire / Impor an informa ion for fire services.....10
2.4 Regula ions (direc ives, laws, s andards)...........................................................11
2.5 Warnings.............................................................................................................. 11
3 Product description.....................................................................................14
3.1 Technical da a......................................................................................................14
3.2 Type pla e............................................................................................................ 15
3.3 Func ional descrip ion.......................................................................................16
3.3.1 Basic principle.............................................................................................16
4 Transport and storage..................................................................................17
4.1 S orage................................................................................................................. 17
4.1.1 Ambien condi ions during s orage...........................................................17
4.1.2 S oring he ba ery modules.....................................................................17
4.2 Transpor .............................................................................................................17
4.2.1 Ambien condi ions during ranspor .......................................................17
4.2.2 Transpor ing ba ery modules..................................................................17
4.2.3 Inspec ing for ranspor damage.............................................................18
4.2.4 Tempera ure adjus men af er ranspor ...............................................20
4.2.5 Placing s orage sys em.............................................................................21
5 Assembly......................................................................................................22
5.1 Scope of delivery................................................................................................22
5.2 Tools needed......................................................................................................23
5.3 Unpacking s orage sys em................................................................................23
5.4 Choosing loca ion.............................................................................................24
5.4.1 Requiremen s of loca ion.........................................................................24
KD-262 | Part-No 52199 | N | Version 1.00 Page 3 of 115

Con en s
5.4.2 Observing minimum dis ances...............................................................24
5.5 Assembling s orage sys em..............................................................................25
5.5.1 A achmen ma erial.................................................................................25
5.5.2 Drilling holes.............................................................................................26
5.5.3 Fi ing wall bracke ...................................................................................27
5.5.4 Joining cabine s........................................................................................27
5.5.5 Placing levelling ma ................................................................................28
5.5.6 Suspending s orage sys em in wall bracke ............................................28
5.5.7 Screwing s orage sys em in place............................................................29
5.5.8 A aching edge guard..............................................................................30
5.5.9 A aching ground s rap.............................................................................31
5.5.10 Fi ing screwed cable glands...................................................................31
5.5.11 Fi ing / removing side wall.....................................................................32
6 Electrical connection..................................................................................33
6.1 Working on he elec rical dis ribu or...............................................................34
6.1.1 Placing componen s in he dis ribu or.....................................................34
6.1.2 Wiring componen s in he elec rical dis ribu or.....................................35
6.2 Rou ing cables in o s orage sys em.................................................................38
6.3 Connec ing E herne cable..............................................................................39
6.4 Elec rical connec ion of s orage sys em........................................................40
6.5 Connec ing Modbus cable...............................................................................42
6.6 Using ex ra connec ions...................................................................................46
6.6.1 Connec ing ba ery emergency s op swi ch...........................................47
6.6.2 Connec ing self-consump ion swi ch....................................................48
6.6.3 Connec ing combined hea and power uni ..........................................49
6.6.4 Connec ing hea pump...........................................................................50
6.6.5 Connec ing PV reduc ion.......................................................................52
6.6.6 Connec ing PV cu ou ............................................................................54
6.7 Ins alling he ba ery modules..........................................................................56
6.7.1 Measuring he ba ery module vol ages..................................................57
6.7.2 Numbering he ba ery modules.............................................................57
6.7.3 Defining he communica ion addresses.................................................57
6.7.4 Se ing he ermina ion swi ches............................................................58
6.7.5 Placing ba ery modules..........................................................................58
6.7.6 Connec ing he DC lines.........................................................................59
6.7.7 Connec ing he BMS communica ion line..............................................61
6.7.8 Check wiring..............................................................................................61
6.7.9 A aching he fuse plugs..........................................................................62
of 115 KD-262 | Part-No 52199 | N | Version 1.00

Con en s
6.7.10 En ering he ba ery capaci y/nominal power on he ype pla e.......62
6.8 Subsequen ba ery add-on.............................................................................62
6.8.1 Full charging of s orage sys em (day before).........................................63
6.8.2 Charge o 85 %........................................................................................63
6.8.3 Ins alling ba ery modules.......................................................................63
7 Starting up...................................................................................................64
7.1 S ar up checklis ................................................................................................64
7.2 Ac iva ing s orage sys em................................................................................65
7.3 Adap ing sof ware se ings...............................................................................65
7.3.1 Da a for PV sys em...................................................................................65
7.3.2 Se ing pos al code for PV forecas .......................................................66
7.4 Self es ............................................................................................................... 66
7.4.1 Addressing ba ery modules.....................................................................66
7.4.2 Cabling ba ery modules..........................................................................67
7.4.3 Number of ba ery modules....................................................................67
7.5 Commissioning repor .......................................................................................67
7.6 Au oma ic full charging....................................................................................68
7.6.1 Au oma ic full charging earlier.................................................................68
7.6.2 Au oma ic full charging la er..................................................................68
Shutting down.............................................................................................69
8.1 Shu ing down s orage sys em..........................................................................69
8.1.1 Swi ching off in emergency......................................................................69
8.1.2 Shu ing down s orage sys em.................................................................70
9 Operation......................................................................................................71
9.1 Opera ing s a us.................................................................................................. 71
9.1.1 S andby opera ing s a us............................................................................71
9.1.2 Charge opera ing s a us.............................................................................71
9.1.3 Discharge opera ing s a us.......................................................................72
9.2 Opera ing mode................................................................................................72
9.2.1 Au oma ic mode........................................................................................72
9.2.2 Manual mode............................................................................................73
10 Software.....................................................................................................74
10.1 Opera ing ouch panel.....................................................................................74
10.2 Descrip ion of screen pages...........................................................................74
10.2.1 S ar page.................................................................................................75
10.2.2 Overview page........................................................................................76
10.2.3 Menu page...............................................................................................76
10.2.4 Func ion page.........................................................................................77
KD-262 | Part-No 52199 | N | Version 1.00 Page 5 of 115

Con en s
10.2.5 Swi ch load page.....................................................................................78
10.3 Making se ings................................................................................................79
10.3.1 Enabling changed se ings......................................................................79
10.3.2 Opera ing en ry window.........................................................................81
10.3.3 Screen page Se ings – Behavior – Produc info................................82
10.3.4 Screen page Se ings – Behavior – Behavior......................................83
10.3.5 Screen page Se ings – Charge behavior – General...........................83
10.3.6 Screen page Se ings – Charge behavior – Service...........................84
10.3.7 Screen page Se ings – Producer – PV – General.............................85
10.3.8 Screen page Se ings – Producer – CHP...........................................86
10.3.9 Screen page Se ings – Load.................................................................87
10.3.10 Screen page Se ings – BMS – General............................................88
10.3.11 Screen page Se ings – Touch panel – Time and language................89
10.3.12 Screen page Se ings – Touch panel – Display..................................90
10.3.13 Screen page Se ings – Touch panel – Passwords..............................91
10.3.14 Ins alling sof ware upda e....................................................................92
11 Internet access............................................................................................93
11.1 Connec ing o In erne .....................................................................................93
11.2 In erne por al..................................................................................................94
11.2.1 Logging in o he in erne por al..............................................................94
11.2.2 Using he overview page..........................................................................95
11.2.3 Using he s a us page..............................................................................95
11.2.4 Using he graph page..............................................................................96
11.2.5 Using he forecas page..........................................................................99
12 Maintenance.............................................................................................100
12.1 Checking func ion..........................................................................................100
12.2 Cleaning......................................................................................................... 100
13 Troubleshooting.........................................................................................101
14 Uninstallation and disposal......................................................................102
14.1 Unins alla ion..................................................................................................102
14.2 Disposal........................................................................................................... 102
15 Overview plans.........................................................................................103
15.1 Connec ions of s orage sys em.....................................................................103
15.2 Elec rical connec ion.....................................................................................105
15.3 Modbus connec ion.......................................................................................106
15.4 Connec ion of DC lines................................................................................107
15.5 Connec ion of BMS communica ion lines..................................................109
16 EU Declaration of Conformity..................................................................111
Page 6 of 115 KD-262 | Part-No 52199 | N | Version 1.00

Con en s
17 Commissioning report...............................................................................115
KD-262 | Part-No 52199 | N | Version 1.00 Page 7 of 115

1
Informa ion abou his documen
1 Information about this document
This documen describes he ins alla ion and opera ion of he sonnenBa erie eco
7.0.
Observe he following poin s:
► Read his documen in i s en ire y before beginning he ins alla ion work.
► Keep his documen in he vicini y of he sonnenBa erie.
1.1 Target groups
This documen is in ended for he following groups of persons:
•Opera ors of he s orage sys em
•Au horised elec ricians
Cer ain ac ivi ies may only be carried ou by au horised elec ricians. The sec ions in
he documen referring o his are indica ed as follows:
Authorised electricians
1.2 Designations in this document
The following designa ions are used in his documen :
Table 1:
Designa ions in his documen
Comple e designa ion Designa ion in his documen
sonnenBa erie eco 7.0 s orage sys em
1.3 Explanation of symbols
Ex remely dangerous si ua ion leading o cer ain dea h or serious injury if he
safe y informa ion is no observed.
Dangerous si ua ion leading o po en ial dea h or serious injury if he safe y
informa ion is no observed.
Dangerous si ua ion leading o po en ial injury if he safe y informa ion is no
observed.
Indica es ac ions ha may cause ma erial damage.
Impor an informa ion no associa ed wi h any risks o people or proper y.
Page 8 of 115 KD-262 | Part-No 52199 | N | Version 1.00
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice

Safe y
2
2 Safety
2.1 Intended Use
The sonnenBa erie eco 7.0 is a ba ery s orage sys em which can be used o s ore
elec rical energy. Improper use of his sys em poses a risk of dea h or injury o he
user or hird par ies as well as damage o he produc and o her i ems of value.
The following poin s mus herefore be observed in order o comply wi h he
in ended use of he produc :
•The s orage sys em mus be fully ins alled in accordance wi h he ins alla ion
ins ruc ions.
•The s orage sys em mus be ins alled by a qualified elec rician.
•The s orage sys em mus only be used a a sui able ins alla ion loca ion.
•The ranspor and s orage condi ions mus be observed.
Failure o comply wi h he condi ions of he warran y and he informa ion
specified in his documen invalida es any warran y claims.
2.2 Requirements for the electrician
The s orage sys em mus only be ins alled and commissioning by au horised
elec ricians. Au horised elec ricians mus mee he following cri eria:
•The company for which he elec rician works mus be cer ified by sonnen
GmbH.
•The elec rician mus be considered compe en and regis ered o work.
•The elec rician mus have successfully comple e sonnen GmbH cer ifica ion
raining for his produc .
2.3 General safety information
► Only use he s orage sys em in i s original s a e – wi hou any unau horised
modifica ions – and when i is in proper working order.
► Ensure ha all pro ec ive devices are working properly.
2.3.1 Danger due to incorrect operation
Incorrec opera ion pu s you and o hers a risk and could cause ma erial damage.
► Read hrough hese ins ruc ions and all fur her applicable documen s carefully,
paying special a en ion o he chap ers on safe y and warnings.
The device mus no be opened during opera ion.
Manipula ing he cabling inside can lead o shor circui s/arcs during opera ion,
hus posing a risk of burns and elec rocu ion.
KD-262 | Part-No 52199 | N | Version 1.00 Page 9 of 115

2
Safe y
2.3.2 Danger to life due to explosive and flammable materials
► Do no use he s orage sys em in po en ially explosive environmen s.
2.3.3 About repairs on the storage system
All repairs on he s orage sys em mus be performed by cer ified service
echnicians only.
2.3.4 Danger to life due to product modifications or changes to
the product environment
► Never block or bypass he pro ec ive devices.
► Never modify he pro ec ive devices.
► Do no make changes o he s orage sys em.
► Do no make changes o he elec rical and da a supply lines.
2.3.5 Conduct in case of a fire / Important information for fire
services
Fire may occur wi h elec rical equipmen despi e i s careful design. Likewise, a fire
in he vicini y of he equipmen can cause he s orage sys em o ca ch fire,
releasing he con en s of he ba ery modules.
► Observe he warnings abou he risk of injury/burns due o he escape of
elec roly e (see sec ion 2.5 – pg. 11).
In he even of a fire in he vicini y of he produc or in he s orage sys em i self,
proceed as follows:
► Only firefigh ers wi h appropria e pro ec ive equipmen (safe y gloves, safe y
clo hing, face guard, brea hing pro ec ion) are permi ed o en er he room where
he burning s orage sys em is loca ed.
There is a danger of elec rocu ion when ex inguishing fire while he s orage sys em
is swi ched on. Therefore, before s ar ing o ex inguish he fire:
► Swi ch off he s orage sys em.
► Swi ch off he mains fuses in he building.
If he s orage sys em and/or mains fuses canno be safely swi ched off:
► Observe he minimum dis ances specified in DIN VDE 0132 for he
ex inguishing agen used.
The s orage sys em works wi h an ou pu vol age of 400 V (AC) and is herefore
considered a low-vol age sys em.
► A s orage sys em fire can be ex inguished using conven ional ex inguishing
agen s.
► Wa er is recommended as an ex inguishing agen in order o cool he ba ery
modules and herefore preven hermal runaway in ba ery modules which are s ill
in ac .
Page 10 of 115 KD-262 | Part-No 52199 | N | Version 1.00

Safe y
2
Informa ion on he ba ery modules:
•The ba ery modules have a nominal vol age of 51.2 V (DC) and herefore fall
in o he range of pro ec ed ex ra-low vol age (under 60 V DC).
•The ba ery modules do no con ain me allic li hium.
Fur her informa ion can be found in he following documen : Merkbla für
Einsa zkräf e – Einsa z an s a ionären Li hium Solars romspeichern (Informa ion
shee for elec ricians – Use on s a ionary li hium solar energy s orage sys ems,
published by he German Solar Associa ion, or BSW – Bundesverband der
Solarwir schaf e.V.)
2.4 Regulations (directives, laws, standards)
► Observe all relevan , curren ly applicable na ional regula ions, especially he
following:
•Regula ions of he local power supply companies.
This lis presen s only a selec ion and does no claim o be exhaus ive. The
au horised elec rician is responsible for knowing and observing all of he regula ions
relevan o heir work.
2.5 Warnings
This sec ion con ains specific warnings ha mus always be observed when working
wi h he produc .
Danger to life due to electrocution!
Touching componen s inside he s orage sys em poses a danger o life due o
elec rocu ion.
► Do no ouch any componen s.
► Do no remove any plas ic covers.
► Never reach below covers.
Danger to life due to electrocution!
When carrying our elec rical work on he s orage sys em, he following mus be
observed:
► Swi ch off he s orage sys em.
► Disconnec he relevan elec rical circui s.
► Secure agains anyone swi ching on he device again.
► Check ha he device is disconnec ed from he power supply.
► Only au horised elec ricians are permi ed o carry ou elec rical work.
Risk of burns!
KD-262 | Part-No 52199 | N | Version 1.00 Page 11 of 115
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice

2
Safe y
Very high shor -circui curren s are possible.
The following mus be observed when working wi h he ba ery modules:
The ba ery module is ac iva ed when he fuse connec or is plugged in. The
vol age runs be ween he plus and minus con ac s of he ba ery module (nominal
vol age of ba ery modules: 51.2 V DC). The ba ery module is deac iva ed when
he fuse connec or is unplugged. No vol age runs be ween he plus and minus
con ac s of he ba ery module. If all in erconnec ed ba ery modules are
deac iva ed, i is safe o work on a ba ery module.
When working on he DC circui :
► Se aside me al jewellery.
► Swi ch off he s orage sys em.
► Swi ch off he series fuse.
► Remove he orange fuse
connec ors on all ba ery modules.
Page 12 of 115 KD-262 | Part-No 52199 | N | Version 1.00

Safe y
2
Risk of injury and burns due to the escape of electrolyte
The ba ery modules ins alled in he s orage sys em are pro ec ed by mul iple
pro ec ive devices and can be opera ed safely.
Despi e heir careful design, he ba ery cells inside he ba ery modules may
corrode or experience hermal runaway in he even of mechanical damage, hea
or a faul .
This can have he following effec s:
•High hea genera ion on he surface of he ba ery cells.
•Elec roly e may escape.
•The escaping elec roly e may igni e and cause an explosive flame.
•The smoke from burning ba ery modules can irri a e he skin, eyes and hroa .
Therefore, proceed as follows:
► Do no open he ba ery modules.
► Do no mechanically damage he ba ery modules (pierce, deform, s rip down,
e c.)
► Do no modify he ba ery modules.
► Do no allow he ba ery modules o come in o con ac wi h wa er (excep
when ex inguishing a fire in he s orage sys em).
► Do no hea he ba ery modules. Opera e hem only wi hin he permissible
empera ure range.
► Do no shor -circui he ba ery modules. Do no allow hem o come in o
con ac wi h me al.
► Do no con inue o use he ba ery modules af er a shor circui .
► Do no deep-discharge he ba ery modules.
In he even ha module con en s are released:
► Do no en er he room under any circums ance.
► Avoid con ac wi h he escaping elec roly e.
► Con ac he fire services.
Deep-discharge of the battery modules
Des ruc ion of he ba ery modules!
► Do no disconnec he s orage sys em from he public grid for long periods of
ime.
► Never con inue o opera e ba ery modules which have been deep-discharged.
KD-262 | Part-No 52199 | N | Version 1.00 Page 13 of 115
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice

3
Produc descrip ion
3 Product description
3.1 Technical data
sonnenBa erie eco 7.0/2 eco 7.0/4 eco 7.0/6 eco 7.0/8 eco 7.0/10 eco 7.0/12 eco 7.0/14 eco 7.0/16
System data (AC)
Nominal vol age 400 V
Nominal frequency 50 Hz
Nominal power 1.500 W 2.500 W 3.000 W 3.300 W 3.300 W 3.300 W 3.300 W 3.300 W
Nominal curren 2,2 A 3,6 A 4,5 A 4,8 A 4,8 A 4,8 A 4,8 A 4,8 A
Mains connec ion Three-phase, L1 / L2 / L3 / N / PE
Mains opology TN / TT
Mains connec ion fuse minia ure circui breaker | Typ B | 10 A … 16 A
Battery data (DC)
Cell echnology li hium iron phospha e (LiFePO4)
Usable capaci y 2,0 kWh 4,0 kWh 6,0 kWh 8,0 kWh 10,0 kWh 12,0 kWh 14,0 kWh 16,0 kWh
Nominal vol age 51,2 V
Dimensions / weight
Dimensions (H/B/T) in cm 90/62/36 90/62/36 160/62/36 160/62/36 160/62/36 160/62/36 160/62/36 160/62/36
Weigh in kg 80 110 170 200 230 260 280 310
Power meter
Vol age measuremen inpu s Nominal vol age (AC): 230 V (L-N), 400 V (L-L) | max. connec ible conduc or cross-sec ion: 1.5 mm2
Clamp-on curren ransformer Max. measurable curren : 60 A
Safety
Pro ec ion class I (PE conduc or)
Degree of pro ec ion IP21
Ambient conditions
Ambien empera ure range 5°C … 30°C
S orage empera ure range 0°C … 40°C
Transpor empera ure range -15 °C … 40°C
Max. rel. humidi y 90%
Permissible ins alla ion al i ude 2000 m above sea level
Addi ional ambien condi ions •Ins alla ion room can be ven ila ed
•Free from vibra ions
•Free from dus (especially flour dus or sawdus )
•Free from corrosive and explosive gases (ammonia
con en max. 20 ppm)
•No direc sunligh
•Even floor, sui able for heavy loads
•Free access o he ins alla ion loca ion
•The curren ly applicable building codes mus be
observed
•fire safe y s andards are observed (smoke de ec or
highly recommended)
Table 2: Technical Da a
Page 14 of 115 KD-262 | Part-No 52199 | N | Version 1.00

Produc descrip ion
3
3.2 Type plate
The ype pla e for he s orage sys em is loca ed on he ou er surface of he sys em.
The ype pla e can be used o uniquely iden ify he s orage sys em. The
informa ion on he ype pla e is required for he safe use of he sys em and for
service ma ers.
The following informa ion is specified on he ype pla e:
• I em designa ion
•I em number
•Version (hardware version)
•Technical da a of he s orage sys em
The nominal power and ba ery capaci y of he s orage sys em differ depending on
he number of ba ery modules ins alled. For his reason he nominal power and
ba ery capaci y mus be en ered on he ype pla e by he elec rician ins alling he
sys em.
KD-262 | Part-No 52199 | N | Version 1.00 Page 15 of 115

3
Produc descrip ion
3.3 Functional description
3.3.1 Basic principle
Figure 1:
sonnenBa erie func ion
1 Public elec rical mains
2 Measuremen of genera ion
3 PV sys em
4 S orage sys em
5 Measuremen of consump ion
6 Consumers in he building (e.g.
washing machine, hob, lamps,
refrigera or, e c.)
3
4
2
5
6
1
The s orage sys em (4) cons an ly measures he curren power genera ion (2) of
he PV sys em1 (3) and he ongoing consump ion (5) in he building.
Generation > consumption
If he genera ion of power is grea er han he consump ion, he surplus power
(difference be ween genera ion and consump ion) is s ored in he s orage sys em.
The ba ery is charged.
For example, if 3000 wa s are genera ed and 1700 wa s are consumed, he
ba ery is charged wi h a power of 1300 wa s.
Consumption > generation
If he consump ion is grea er han he genera ion of power, he defici (difference
be ween consump ion and genera ion) is provided by he s orage sys em. The
ba ery is discharged.
For example, if 3500 wa s are consumed and 2000 wa s are genera ed, he
ba ery discharges a power of 1500 wa s.
1 or of ano her genera or like a wind urbine or dis ric hea ing plan , for example.
Page 16 of 115 KD-262 | Part-No 52199 | N | Version 1.00

Transpor and s orage
4
4 Transport and storage
Authorised electricians
4.1 Storage
S orage describes he condi ion when he s orage sys em is no connec ed o he
public elec rical mains and he ba ery modules canno be au oma ically charged.
4.1.1 Ambient conditions during storage
The ambien condi ions specified in Tabular 3.1 (pg. 14) mus be observed during
s orage.
4.1.2 Storing the battery modules
Damage/destruction of battery modules due to deep-discharge!
During s orage he ba ery modules au oma ically discharge a a minimal level.
Deep-discharge could damage or des roy he ba ery modules. For his reason,
he ba ery modules can only be s ored for a limi ed amoun of ime.
Observe he following poin s:
•The ba ery modules mus be charged o 85% (charging s a us upon delivery)
when s ored.
•S ore he ba ery modules for no longer han 6 mon hs.
•Ins all he ba ery modules in he s orage sys em af er 6 mon hs a he mos
and commission he s orage sys em.
•During s orage he orange fuse plug mus no be plugged in o any ba ery
module.
4.2 Transport
4.2.1 Ambient conditions during transport
The ambien condi ions specified in Tabular 3.1 (pg. 14) mus be observed during
ranspor .
4.2.2 Transporting battery modules
Improper transport of battery modules
Fire ou break a ba ery modules or emission of oxic subs ances!
► Transpor he ba ery modules in heir original packaging only. If you no longer
have he original packaging, new packaging can be reques ed from sonnen GmbH.
► Never ranspor damaged ba ery modules.
KD-262 | Part-No 52199 | N | Version 1.00 Page 17 of 115
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice

4
Transpor and s orage
Li hium-ion ba eries are hazardous goods. Therefore he following poin s mus be
observed when ranspor ing he ba ery modules:
► Observe he general ranspor regula ions based on he mode of ranspor as
well as all legal regula ions.
► Consul an ex ernal hazardous goods exper .
The ba ery module da a relevan for ranspor is provided in he following:
•Hazardous goods class: 9
•UN number: UN3480 ‘li hium-ion ba eries’
•Ba ery module mass (including packaging): 29 kg
4.2.3 Inspecting for transport damage
Use of damaged battery modules
Fire ou break a ba ery modules or emission of oxic subs ances!
► Unpack he ba ery modules immedia ely af er ranspor and inspec hem for
ranspor damage.
If damage (deforma ion, damage o he housing, emission of subs ances and he
like) is discovered:
► Do no use he ba ery modules under any circums ance.
► Inform he service eam.
Insulation fault when storage system is damaged
Danger of elec ric shock when ouching damaged insula ion elemen s!
► Unpack he s orage sys em immedia ely af er ranspor and inspec i for
ranspor damage.
► Do no use a damaged s orage sys em under any circums ance.
Paragraph 425 of he German Commercial Code ( Handelsgese zbuch ) forms he
legal basis for processing ranspor damage.
The shipping company can only be held liable for ranspor damage if i can be
proven ha he damage occurred during he course of ranspor . For his reason i
is impor an o follow he ins ruc ions given here as closely as possible.
Transpor damage is divided in o open and hidden damage. Open damage is
ex ernally visible damage o he ranspor ed goods or heir packaging. Hidden
damage occurs when he packaging is no damaged bu he ranspor ed goods
inside are.
Open ranspor damage mus be repor ed o he shipping company immedia ely.
The following imeframes apply in he case of hidden ranspor damage:
•Deu sche Pos / DHL / parcel services: repor damage wi hin 24 hours
•Shipping company: repor damage wi hin 7 days
Proceed as follows:
Page 18 of 115 KD-262 | Part-No 52199 | N | Version 1.00
CAUTION
DANGER
WARNING
Notice
CAUTION
DANGER
WARNING
Notice

Transpor and s orage
4
1 Check the shipping documents
dsds
► Check he recipien address and number of shipped goods in he presence of
he shipper.
2 Inspect the goods for open damage
dsds
► Inspec he packaging and ranspor goods for ex ernal damage in he presence
of he shipper.
If damage is discovered:
► Inspec he goods for hidden damage in he presence of he shipper.
Figure 2:
Transpor indica or affixed o he
packaging
► Check he ranspor indica or
affixed o he packaging of he main
cabine in he presence of he shipper.
The s orage sys em has no been ranspor ed properly if blue powder has been
ransferred in o he arrow of he ranspor indica or.
► Refuse o accep he goods if blue powder has been ransferred in o he arrow
of he ranspor indica or.
3 Inspect the goods for hidden damage
dsds
This inspec ion should also ake place in he presence of he shipper if possible.
► Unpack he goods.
► Inspec he goods for hidden (no immedia ely visible) ranspor damage.
If ranspor damage is discovered:
► S op unpacking he produc .
► Collec pho ographic evidence of he damage.
► Refuse o accep he goods if he discovered defec s are serious.
4 Document the defects
dsds
► Documen he defec s iden ified on he consignmen no e.
The documen a ion should include he following:
• No a ion ‘Condi ional accep ance’
•Regis ra ion number of he delivery vehicle
•Signa ure of he shipper
5 Report the damage
dsds
► Repor he damage o he responsible ranspor company and he manufac urer
immedia ely.
► Send he consignmen no e/delivery no e wi h he shipper's confirma ion of he
damage and pho ographic evidence o he manufac urer by email.
KD-262 | Part-No 52199 | N | Version 1.00 Page 19 of 115

4
Transpor and s orage
Damage claims canno be se led if he abovemen ioned documen a ion is no
submi ed wi hin he s a ed repor ing imeframes.
4.2.4 Temperature adjustment after transport
Damage to the storage system due to condensation
If he empera ure of he s orage sys em is lower han he ambien empera ure
of he room when i is delivered, condensa ion may form inside he s orage
sys em. This may damage he s orage sys em.
► Check he inside of he s orage sys em for condensa ion before ins alla ion.
► Only ins all he s orage sys em if here is no condensa ion on he surfaces.
If he s orage sys em has been ranspor ed in sub-zero empera ures,
proceed as follows:
1. Se up he s orage sys em in a sui able loca ion.
2. Open all con rol cabine doors.
3. Leave he s orage sys em o s and for a leas 24 hours wi h open con rol
cabine doors.
4. Only hen can you commission he s orage sys em.
Page 20 of 115 KD-262 | Part-No 52199 | N | Version 1.00
CAUTION
DANGER
WARNING
Notice