Sonnet FUSION 400 User manual

4-Bay Serial ATA Hot-Swap Drive Enclosure
FUSION™ 400
User’s Guide
For
Windows

Bay 1
Connector
Bay 2
Connector
Bay 3
Connector
Bay 4
Connector
Specifications
Compatibility Compatible with Mac,
Windows, and Linux comput-
ers with compatible SATA
controller
External Connectors Four eSATA
Drives Supported 1.5 & 3 Gb per second Serial
ATA; up to 10,000 RPM
Data Transfer Speed Up to 300MB per second per
drive
OS Support Platform Independent
Power Supply 90-260v Universal
Operating Temperature +41˚ F to +131˚ F
(+5˚ C to +55˚ C)
Dimensions 7.5 x 5.875 x 11.25"
(190.5 x 149.22 x 285.75mm)
Weight 9.35 lbs
Package Contents Disk enclosure, four 3.5"
drive trays, drive tray keys,
drive mounting screws,
power cord, four 1 meter
eSATA data cables, User’s
Guide
Warranty 3-year limited warranty
Fusion 400 Specifications and Features
1
Figure 1
Figure 2
Drive Tray (Bay 1)
Drive Tray (Bay 2)
Drive Tray (Bay 3)
Drive Tray (Bay 4)
Drive Presence LED
(Bay 1)
Drive Presence LED
(Bay 2)
Drive Presence LED
(Bay 3)
Drive Presence LED
(Bay 4)
Drive Activity LED
(Bay 1)
Drive Activity LED
(Bay 2)
Drive Activity LED
(Bay 3)
Drive Activity LED
(Bay 4)
Power Cable
Connector
Power Switch

Introduction
Sonnet’s Fusion 400 4-bay Serial ATA (SATA) drive enclosure
combines the versatility of hot-swap functionality with sup-
port for the fastest 3.5" SATA drives in a compact package. This
enclosure supports 3Gb/s drives and is backward compatible with
1.5Gb/s drives, so you’ll get maximum flexibility in choosing
drives for years to come.
Fusion 400 was designed with form and function in equal bal-
ance. The drive trays have built-in locking levers that double as
handles to make swapping drives easy; its powerful built-in uni-
versal power supply and the cable-less connections from drives to
enclosure simplify setup and assure reliability over the long haul.
The enclosure’s user-swappable fan pulls air through its holes and
those in the tray handles to cool the drives (even the bottom of
each removable tray is open for air flow) to make Fusion 400 a
cool running solution—the lower the drives’ temperature, the
lower the failure rate.
Whether you start off with one drive for simple backups, or stuff
Fusion 400 with the highest capacity, fastest SATA drives you can
get your hands on to create a high-def digital video editing suite,
this is a product sure to leave you SATAsfied!
SAFETY PRECAUTIONS
Please read this section carefully before proceeding. These pre-
cautions explain the correct and safe use of this device, thereby
helping to prevent injury to you or others, and also help you to
minimize the risk of damaging the device.
Warnings
Always follow the basic warnings listed here to avoid the risk of
serious injury or death from electrical shock, short-circuiting, fire,
and other hazards. These warnings include, but are not limited
to:
• With the exception of the user-swappable parts, do not attempt
to disassemble or modify the enclosure. If this device appears to
be malfunctioning, contact Sonnet Customer Service.
• Do not drop the enclosures or any of its drive trays; dropping
or mishandling of the enclosure or drive trays may result in a
malfunction.
• Do not insert your fingers or foreign objects inside the enclo-
sure; take particular care when small children are present.
• Do not expose the device to rain, use it near water or containers
that contain liquids which might spill into any openings, or in
damp or wet conditions.
• If unusual smells, sounds, or smoke come from the device, or
if liquids enter it, switch it off immediately and unplug it from
the electrical outlet.
• Follow the instructions in this manual carefully; contact
Sonnet Customer Service for additional advice not covered in
this User’s Guide.
Introduction and Safety Precautions
2

1. Remove the Fusion 400 from its packaging, and place the enclo-
sure near the computer to which it will be connected.
2. Push a lever release button toward the right until the lever pops
out, and then pull the lever toward you to slide out and remove
the drive tray (Figure 3).
3. Remove a SATA drive from its packaging and set it in on a flat
level surface with the label side down. Turn the drive tray upside
down and lay it on top of the drive, with the back of the tray
toward the drive’s connectors (Figure 4).
4. Using four of the supplied screws, secure the drive tray to the
drive; tighten each screw to secure the tray snugly to the drive;
do not overtighten the screws (Figure 5).
5. Carefully insert the drive tray into the enclosure until it stops,
and then push the lever in to secure the drive and tray inside the
enclosure (Figure 6).
6. Repeat steps 2-5 for additional drives.
Figure 6
Figure 5
Figure 4
Figure 3
WARNING: When handling computer products, take care to
prevent components from being damaged by static electricity;
avoid working in carpeted areas. Handle hard drives only by their
edges and avoid touching connector traces and component pins.
Drive Installation and Enclosure Setup
3
drive tray
screw
push lever until
it stops
screw
screw
drive
drive tray
drive
drive tray
lever
lever release
button
WARNING: When securing the trays to the hard drives, you
must verify the screw heads are flush with the tray. Otherwise,
a screw may catch on the tray below and prevent you from removing
the tray from the enclosure.

7. Connect the supplied eSATA data cables between the enclosure
and the SATA host controller in your computer; verify the con-
nectors are plugged in securely (Figure 7).
8. Connect the supplied power cable between the Fusion 400 and a
grounded wall outlet or power strip; verify the cable is plugged
in securely
.
9. Push the switch on the back of the enclosure to the ON position,
and then power on your computer.
10. Format the drives installed in the Fusion 400 according to your
needs; refer to your operating system’s software guide or help sec-
tion for more information.
Figure 7
Drive Installation and Enclosure Setup
4
eSATA data cable

5
Tips
This section covers some common sense tips for using the Fusion
400 enclosure.
Hot-swapping drives:
Fusion 400 supports hot-swapping drives, enabling you to swap
out a drive or an array of drives without having to shut down the
enclosure or your computer. This does not mean you can simply
pull out a drive at any time; you follow the procedure below or
you may lose data in the process.
• Before removing a tray, you must put away (eject, unmount,
dismount) the drive volume. For Mac OS users, simply drag
the drive icon associated with the drive(s) you wish to remove
to the eject icon on the dock (or trash can on the desktop).
Windows users may left-click on the eject icon in the taskbar
for the drive they wish to eject.
Connections:
Fusion 400 uses eSATA data cable connectors to ensure the best
connection. If you experience issues where a drive or volume
does not appear, or you see an error message stating a drive is
missing when you have the drives set up in an array, the cause
may be as simple as a loose connection.
• If you do experience any trouble, disconnect the data cables
and reconnect them one at a time, making sure each one
“clicks” in place.
Tips and Additional Information
Limited Warranty
Sonnet Technologies, Inc. warrants that this product shall be free
from defects in materials and workmanship for a period of three
years following the date of original purchase. For complete war-
ranty information, go to www.sonnettech.com.
Contacting Customer Service
The Sonnet web site located at www.sonnettech.com has the
most current support information and technical updates.
Before you call Sonnet Customer Service, please check our web
site for the latest updates and online support files, and check
this User’s Guide for helpful information. When you call Sonnet
Customer Service, have the following information available so
our customer service staff can better assist you:
• Product name
• Date and place of purchase
• Hard drive model(s)
• SATA host controller manufacturer and model number
• Computer model
• Operating system
If further assistance is needed, please contact us at:
Sonnet Customer Service:
Tel: [phone]
(Monday–Friday, 7 a.m.–5 p.m. Pacific Time)
Fax: [phone]
E-mail: [e-mail]
Online Service Form: http://serviceform.sonnettech.com
Visit Our Web Site
For the most current product information and online sup-
port files, visit the Sonnet web site at www.sonnettech.com.
Remember to register your product online at http://registration.
sonnettech.com to be informed of future upgrades and product
releases.

This page intentionally left blank

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: [phone] • E-mail: [e-mail]
Sonnet Technologies, Inc., Irvine, California USA • Tel: [phone] Fax: [phone]
©2006 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype and Fusion are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trademarks of
Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.
UG-ENC-SATA-D4-E-A-041806