Sonnet Echo Express III-D Original operating instructions

6. Grasping the card by its edges, rotate the bracket out of the inner
assembly, and then pull out the card. Set aside the card on flat
surface, component side down.
4. Remove and set aside the two screws securing the Thunderbolt
interface card to the inner assembly.
5. Gently push down on the edge of the card
to disengage it from the slot.
©2017 Sonnet Technologies, Inc.All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Echo are
trademarks of Sonnet Technologies, Inc. Thunderbolt 3 and the Thunderbolt logo are trademarks of Intel Corporation in the U.S.
and/or other countries. Other product names are trademarks of their respective owners. Product specifications subject to change
without notice. QS-BRD-UPGRTB3-E3D-E-B-072417
1. Disconnect any cables connected to the Echo chassis, and then
set it on a flat, level surface.
2. Using a Phillips screwdriver, remove and set aside the eight
screws securing the outer case to the inner
assembly.
3. Grasping the outer case with one hand, push the inner assembly
into the outer case, and then gently pull out the inner assembly.
Set aside the outer case.
Support Note: To avoid damaging components due to static
electricity discharge, wear an antistatic wrist strap while working
inside the Echo Express chassis.
Note that these illustrations show the Echo chassis with PCIe cards
removed, but it is not necessary for you to remove them.
WARNING: When handling computer products, take care to
prevent components from being damaged by static electricity;
avoid working in carpeted areas. Handle expansion cards only by their
edges and avoid touching connector traces and component pins.
Also, avoid touching the Echo chassis’ circuit boards and any of its
components.
WARNING: Connection of your upgraded Echo chassis to a
Thunderbolt 3 computer requires the use of a Thunderbolt 3
(40Gbps) cable, which features both a Thunderbolt icon ( ) AND the
number 3 on the connector housings. Similar-looking cables without
the Thunderbolt icon on its connectors are USB cables, and do not
support connection of the Echo chassis to your computer.
Thunderbolt 3 Upgrade
Quick Installation Instructions
for Echo Express III-D

11. Grasping the outer case, gently push the inner assembly back
inside.
12. Secure the outer case to the inner assembly using the eight
screws you removed previously; your upgrade
is complete.
13. Connect the Echo chassis to your
computer with a Thunderbolt 3
(40Gbps) cable (sold separately),
and then reconnect any
other cables to the
chassis.
14. Place the Thunderbolt 2 interface card in the upgrade card’s
packaging and set it aside for safe keeping.
9. Line up the card’s connector with the slot, and then gently but
firmly press the card straight into the slot; do not rock the
card or force the card into the slot. If you
encounter excessive resistance, check the card’s
connector and the slot for damage, and
then try inserting the card again.
10. Using the two screws you
removed previously,
secure the Thunderbolt
interface card to the
inner assembly; do not
overtighten the screws.
7. Remove the Thunderbolt 3 upgrade card from its packaging,
handling the card by its bracket.
8. Grasping the Thunderbolt 3 upgrade card
by its edges, insert the card into the
inner assembly.
Limited Warranty
For complete warranty information, go to www.sonnettech.com/
support/warranty.html
Contacting Customer Service
The Sonnet Web site located at www.sonnettech.com has the most
current support information and technical updates. Before you call
Customer Service, please check our Web site for the latest updates
and online support files, and check this Quick Start Guide for helpful
information.
When you call Customer Service, have the following information
available so the customer service staff can better assist you:
• Product name • Date and place of purchase • Computer model
USA Customers
If further assistance is needed, please contact Sonnet Customer
Service at:
Tel: [phone]
(Monday–Friday, 7 a.m.–4 p.m. Pacific Time)
E-mail: [e-mail]
For Customers Outside the USA
For support on this product, contact your reseller or local distributor.
Visit Our Web Site
For the most current product information and online support files,
visit the Sonnet web site at www.sonnettech.com. Remember to
register your product online at http://registration.sonnettech.com to
be informed of future upgrades and product releases.