Sonoff S60TPF User manual

1
S  TP F ( EN )
A "safe and reliable" Wi-Fi Smart Plug with main functions such as remote control, power
monitoring, and voice control. You are able to check the daily/monthly power consumption on
the energy overview page in the eWeLink App. Home automation can be achieved by the
configuration of smart scenes, timers, schedules, etc.
Introduction
Wi-Fi Smart Plug
User Manual V1.0
Remote Control Timers/Schedule Voice Control Device Sharing

2
Compatible Voice Assistants
Specification
Smart Scene Inching Mode Energy Overview Over-load Protection
① Button
Press once: Turn on/off the smart plug.
Press and hold for 5 seconds : Device enters the pairing
mode.
② Wi-Fi LED indicator (Blue)
Keeps on: Device is online.
Two short and one long flashes: Device is in pairing
mode.
Quick flash: Router not connected.
Flash twice: Connected to the router, but not connected
to the cloud.
Flash three times: Firmware upgrade in progress.
③ Power LED indicator (Red)
Light on: The device is on.
Light off: The device is off.
Model S60TPF

3
Note: To ensure the safety of your electrical installation, it's essential either a Miniature Circuit
Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating
of 16A has been installed before the plug.
Please download the " eWeLink " App from Google Play Store or Apple App Store .
Download the “ eWeLink ” App
Add Device
MCU ESP32-C3
Input 250V~,50/60Hz,16A
Max. Load 4000W
Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n 2.4GHz
Net Weight 79g
Dimension 50x50x61.5mm
Color White
Casing Material PC V0
Applicable Place Indoor
Working Temperature -10 ℃ ~40 ℃
Working Humidity 5%~95% RH, non-condensing
Certified Compliance CE/RoHS

4
Enter “ Scan ” Scan the QR code on the device
Select “ Add Device ” Plug in
Long press the button for 5 seconds Check Wi-Fi LED indicator flashing status
(Two short and one long flashes)

5
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S60TPF
is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is
available at the following internet address:
https://sonoff.tech/usermanuals
EU Declaration of Conformity
SAR Warning
Search for the device and start connecting Select the "Wi-Fi" network and enter the
password
Device added completely

6
Under normal use of condition, this equipment should be kept a separation distance of at least
20 cm between the antenna and the body of the user.
Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance
d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.
Operation frequency Range
BLE: 2402-2480MHz
Wi-Fi Operation Frequency: 802.11 b/g/n20 2412-2472 MHz ， 802.11 n40: 2422-2462 MHz
RF Output Power: BLE: ≤ 10dBm ， Wi-Fi: ≤ 20dBm
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China
For CE Frequency
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the
environment and human health. Please contact the installer or local
authorities for more information about the location as well as terms and
conditions of such collection points.

7
ZIP code: 518000 Service email: [e-mail]
Website: sonoff.tech Made in China