Sonova Phonak Roger Select User manual

Phone calls made easy
with Roger™
Guide

2
All microphone options at a glance
Portable device/PC / laptop
for phone calls over internet
(wireless via Bluetooth®)
PC / laptop for phone
calls over internet
(via cable)
Stationary desktop phone
(via cable)
Call center
(via Bluetooth)
Headset
communications
hub and Bluetooth
USB adapter
Phone recording
adapter
Optional:
External headset
microphone
Optional:
Bluetooth USB
adapter
Phone option
Roger Select™Roger Table Mic II
(iN)
Roger On™
(iN)
Roger Select™ iN Additional
parts
Other phone options from Phonak are available, check www.phonak.com/phone-solutions
The Bluetooth® word mark and logos are registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by Sonova AG is under license.

3
Portable device/PC/laptop for phone calls over
internet
(VoIP, e.g., Zoom, MS Teams) wireless via Bluetooth
1Pair your portable device/PC/laptop with the Roger Select
2During the phone call, simply talk into the Roger Select
3Hear the caller’s voice in both ears!
Simply pair the Roger Select with your Bluetooth enabled portable device/PC/laptop. For making a phone call, you don’t need to
hold your phone to your ear. And the best thing is, you hear the caller in both ears!
Required device
Roger Select
Using Bluetooth
If your PC/laptop does not have Bluetooth integrated, then plug the Bluetooth USB
adapter into a free USB slot on your PC/laptop and pair the Bluetooth USB adapter
with the Roger Select.
Optional: Bluetooth USB adapter
(Phonak part number: 076-0856)
1
2
3
Note: This solution does not work with hearing aids with RogerDirect™.

4
PC/laptop for phone calls over internet
(VoIP, e.g., Zoom, MS Teams) via audio cable
1Connect the headphone output of your PC /laptop to the
docking station’s audio input or directly to the Roger
microphone’s audio input
2During the call, speak into the integrated PC/laptop
microphone
3Hear the caller’s voice in both ears!
Optional: External
headset microphone
This easy-to-set-up option sends the caller’s voice directly to both ears.
1Connect the headphone output of your PC/laptop to the
docking station’s audio input or directly to the Roger
microphone’s audio input
2Connect the headset microphone to the microphone input
of your PC/laptop, alternatively, you can also connect the
headset to a USB port if it is a USB headset
3During the call, speak into the external microphone
4Hear the caller’s voice in both ears!
Using a headset microphone will ensure a better sound quality
of your own voice.
Note: You may need to adjust the audio settings of your
PC or VoIP software to define the 3.5 mm jack as audio
output and the USB microphone as microphone input.
Required devices (options)
Roger Select Roger Table Mic II Roger On
Using the integrated microphones from a PC/laptop
Using external headset microphone
2
3
1
2
34
1
Roger Select iN Roger Table Mic II iN Roger On iN

5
1Connect the USB charging cable between your PC/laptop and Roger On
2During the phone call, speak into the integrated PC/laptop microphone or use an external microphone as shown on the
previous page
3Hear the caller’s voice in both ears!
PC/laptop for phone calls over internet
(VoIP, e.g., Zoom, MS Teams) via USB cable
Required device
Roger On
1
2
3
Using USB cable
Roger On iN

6
Stationary desktop phones
via cable
1Install the phone recording adapter between the phone and the handset
2Connect the audio output of the phone recoding adapter to the docking station’s audio input
or directly to the Roger microphone’s audio input
3During the call, speak into the phone’s handset
4Hear the caller’s voice in both ears!
To answer the phone, pick up the handset and hold it to your mouth because you still need to talk into the handset.
The voice from the caller, however, will be sent directly to both ears.
Phone recording adapter
(e.g. Phone Kit 055-4064)
2
3
4
1
Required devices (options)
Roger Select Roger Table Mic II Roger On
Using phone recording adapter
Roger Select iN Roger Table Mic II iN Roger On iN

7
Call center
(PC/laptop and desk phone) wireless via Bluetooth
1Connect the headset communications hub to your PC/laptop
2Install the adapter of the headset communications hub between the phone and the handset
3Plug in the Bluetooth USB adapter into the headset communications hub
4Pair the Bluetooth USB adapter with the Roger Select
5During the call, speak into the Roger Select
6Hear the caller’s voice in both ears!
1
2
36
4
5
Headset communications hub (e.g., Poly MDA200),
Bluetooth USB adapter (e.g., Poly PLT-BT300)
This is the most advanced solution for busy office calls. Phones can be switched between PC and office phone. In both cases,
the phone is transferred to the Roger Select which is ideally worn around the neck enabling you to have both hands free during
the phone call.
Required device
Roger Select
Using Bluetooth
Note: This solution does not work with hearing aids with RogerDirect™.

028-1425-02/V4.00/2021-05/cl © 2021 Sonova AG All rights reserved
At Phonak, we believe that well-hearing equates to well-being
and is essential to living life to the fullest. For more than 70 years,
we have remained passionate about creating a world where ‘life is
on’ for everyone. Our innovative hearing solutions are designed
for people of all ages and all degrees of hearing loss, to connect
socially, thrive mentally and emotionally.
www.phonakpro.com/roger
life is on