Sony Ericsson Cyber-shot C905 User manual

Working Instruction, Mechanical
1218-1731 Rev 3 1(87)
Working Instruction, Mechanical
Applicable for C905
CONTENTS
1Introduction ..............................................................................4
1.1 Equipment.................................................................................5
1.2 General cautions......................................................................6
1.3 Adhesives .................................................................................6
2Disassembly .............................................................................7
2.1 Overview ...................................................................................8
2.2 Battery Cover & Battery...........................................................9
2.3 Foil Flip Inner..........................................................................10
2.4 Keyboard.................................................................................10
2.5 Cap Plastic RF Numeric Keyboard & Cap Numeric
Keyboard.................................................................................11
2.6 Cover Flip Front......................................................................12
2.7 Display 2.41 TFT.....................................................................13
2.8 LCD Support Sheet ................................................................13
2.9 PBA Key Flex Flip Complete.................................................14
2.10 Cover Rear Assembly............................................................16
2.11 Cover Base Rear Assembly...................................................17
2.12 Main PBA.................................................................................18
2.13 Loudspeaker Assembly.........................................................20
2.14 Flash Complete and Camera 8MP.........................................21
3Replacements.........................................................................23
3.1 Battery Cover & Battery.........................................................24
3.2 Cover Flip Front Assembly....................................................24
3.3 Cover Base Rear Assembly...................................................24
3.4 Flash Complete.......................................................................24
3.5 PBA Key Flex Flip Complete.................................................24
3.6 Slider FPC Assy......................................................................24
3.7 Cover Rear Assembly............................................................24
3.8 Carrier Base Assembly..........................................................25
3.9 Camera 8 MP...........................................................................25
3.10 Foil Flip Inner..........................................................................25
3.11 LCD Support Sheet ................................................................25
3.12 Loudspeaker Assembly.........................................................25
3.13 Screw 4.0x1.4..........................................................................25
3.14 Screw 2.3x1.4..........................................................................25
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 2(87)
3.15 Screw Torx 5.3x1.6.................................................................26
3.16 Screw Torx 5.0x1.6.................................................................26
3.17 Screw Philips M1.4x1.7..........................................................26
3.18 Cap Plastic RF Keyboard Numeric.......................................26
3.19 Cap Numeric Keyboard..........................................................26
3.20 Foil Adhesive Single Side 0.15 mm Flip Tape .....................26
3.21 Display 2.41 TFT.....................................................................27
3.22 Cover Flip Inner Metal............................................................27
3.23 Cap Reinforcement Plug (Right and Left)............................28
3.24 Numeric Key Foil....................................................................29
3.25 Keyboard Navigation .............................................................31
3.26 Key A/B Left............................................................................32
3.27 Key A/B Right .........................................................................33
3.28 Co Brand Label.......................................................................34
3.29 Key Volume.............................................................................35
3.30 Key Mode ................................................................................35
3.31 Key Camera.............................................................................36
3.32 M2 Lid37
3.33 Microphone Gasket................................................................38
3.34 BT/WLAN Antenna .................................................................39
3.35 Left Sidepanel.........................................................................40
3.36 Right Sidepanel Bottom.........................................................41
3.37 Right Sidepanel Top...............................................................42
3.38 Ear Speaker.............................................................................43
3.39 Vibrator....................................................................................44
3.40 Light GU Navigation...............................................................45
3.41 Dome Foil Flip.........................................................................46
3.42 PBA Key Flex Flip Complete.................................................48
3.43 Shield Can Lid Flip.................................................................49
3.44 Cushion 1,0mm1,3x5,1,0 Conductive...................................50
3.45 Foil Adhesive 0.048 mm Flex Flip.........................................51
3.46 Foil Adhesive Conductive 0.05 mm protection tape, front.52
3.47 Foil Adh Conduct GPS ESD protection tape .......................53
3.48 Foil Adhesive Double Side GPS Shieldcan .........................54
3.49 Foil Adhesive Double Side A/B Flex Tape ...........................55
3.50 Foil Adhesive Double Side GPS Antenna............................56
3.51 Shield can lid, Vera ................................................................56
3.52 Shield can lid, regulator.........................................................57
3.53 Shield can lid, Kajsa...............................................................57
3.54 Shield can lid, WLAN .............................................................58
3.55 Shield Can Lid, Camera.........................................................58
3.56 Liquid Intrusion Indicator (1 and 2)......................................59
3.57 Foil Adhesive LCD Support, left ...........................................61
3.58 Foil Adhesive LCD Support, right.........................................62
3.59 Light Gu Numeric...................................................................63
3.60 Hinge Slide Mechanism.........................................................65
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 3(87)
3.61 Label 67
4Reassembly ............................................................................68
4.1 Overview .................................................................................69
4.2 Flash Complete and Camera 8 MP........................................70
4.3 Loudspeaker Assembly.........................................................72
4.4 Main PBA.................................................................................72
4.5 Cover Base Rear Assembly...................................................76
4.6 Cover Rear Assembly............................................................77
4.7 PBA Key Flex Flip Complete.................................................77
4.8 LCD Support Sheet ................................................................80
4.9 Display 2.41 TFT.....................................................................81
4.10 Cover Flip Front......................................................................82
4.11 Cap Plastic RF Numeric Keyboard & Cap Numeric
Keyboard.................................................................................83
4.12 Keyboard.................................................................................84
4.13 Foil Flip Inner..........................................................................85
4.14 Battery Cover & Battery.........................................................85
5Country of Origin Barcodes for Brazil/VIVO Labels............86
6Revision history .....................................................................87
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 4(87)
1 Introduction
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 5(87)
1.1 Equipment
SPECIAL TOOLS
Special tools text:
•NTZ122459 Torque Screwdriver (or equivalent)
•NTZ122288 Bit (T6)
•NTZ112478 Bit (T5)
•NTZ1121052 Bit(JCIS No 0)
•NTZ112302/2 Front opening tool
•NTZ112521 Flex film assembly tool
•NTZ112590 Plectrum/SVC & Repair
STANDARD TOOLS
Standard tools text:
•Dentist hook
•ESD tweezers
•Nylon Pointer
•Screwdriver
ESD EQUIPMENT
Protect the phone from ESD damages whenever it has
been opened by using:
•ESD-wristband
•ESD-gloves
LABEL EQUIPMENT
The following special equipment is required when replacing
or installing a new label:
•Hot air flow solder station
•Zebra printer connected to computer
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 6(87)
1.2 General cautions
The following cautions are considered to be generic for all phone models and will not be repeated in
the Disassembly, Replacements and Reassembly sections:
•SWITCH OFF THE PHONE AND REMOVE ANY MEMORY STICK BEFORE THE START OF THE DISASSEMBLY!
•KEEP ALL CONTACT SURFACES CLEAN!
•BE CAREFUL WHEN USING TOOLS LIKE THE DENTIST HOOK,TWEEZERS,OPENING TOOLS,GUITAR PICK
ETC.TO AVOID SCRATCHES OR DAMAGES TO THE EXTERIOR AND INTERIOR PARTS OF THE PHONE!
•BE CAREFUL NOT TO DAMAGE ANY CONTACT SPRINGS!
•REMEMBER TO REMOVE THE PROTECTION FOILS ON NEW PARTS SUCH AS THE FRONT COVER AND LCD!
•NEVER TOUCH THE DISPLAY GLASS!
•USE AIR BLOW EQUIPMENT TO KEEP THE FRONT WINDOW AND DISPLAY MODULE DUST FREE!
1.3 Adhesives
Use a dentist hook and/or the tweezers to remove old adhesives.
Clean the surface with isopropyl alcohol before attaching new adhesives.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 7(87)
2 Disassembly
When you are going to replace a part being listed in Replacements, the instruction of that section
usually begins by directing you to this Disassembly section with a specification of the instructions you
have to carry out in order to disassemble the phone as far as needed before returning to
Replacements for the actual replacement.
Start
DISASSEMBLY REASSEMBLY
Contents
page
REPLACEMENTS
Done
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 8(87)
2.1 Overview
The disassembly is done in the following sequence:
1. Battery Cover
1a. Battery
2. Flip Inner
3. Keyboard
4. Cap Plastic RF Numeric Keyboard & Cap Numeric
Keyboard
5. Cover Flip Front
6. Display 2.41 TFT
7. LCD Support Sheet
8. PBA Key Flex Flip Complete
9. Cover Rear Assembly
10. Cover Base Rear Assembly
11. Main PBA
12. Loudspeaker Assembly
13. Flash Complete and Camera 8MP
14. Carrier Base Assembly
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 9(87)
2.2 Battery Cover & Battery
Remove the Battery Cover.
Remove the Battery.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 10(87)
2.3 Foil Flip Inner
Use a pair of ESD tweezers to remove the Flip Inner.
Use a Screwdriver with JCIS Bit to remove the two Screws
4.0x1.4.
2.4 Keyboard
Use a Screwdriver to loosen the keyboard from the opposite
side
Use a Flex Film Assembly Tool to remove the Keyboard
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 11(87)
2.5 Cap Plastic RF Numeric Keyboard & Cap Numeric
Keyboard
Use a Screwdriver to remove the Cap Plastic RF Keyboard
Numeric on the opposite side.
Use Screwdriver to remove the Cap Numeric keyboard on
the opposite side.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 12(87)
2.6 Cover Flip Front
Use your fingers to slide and position the Cover Flip Front
to make the two Screws 2.3x1.4 visible through the two
holes in the Cover Base Rear Assembly.
Use a Screwdriver with JCIS Bit to remove the two Screws
2.3x1.4.
Use a Guitar Pick to loosen the Cover Flip Front on both
sides.
Use your fingers to remove the Cover Flip Front.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 13(87)
2.7 Display 2.41 TFT
Locate the three snap hooks and use a Front Opening Tool
to release the PCB-part of the PBA Key Flex Flip Complete.
Use a Front Opening Tool to disconnect the LCD FPC
Connector
BE VERY CAREFUL WHEN BENDING THE PCB-PART OF THE
KEY FLEX FLIP
BE VERY CAREFUL NOT TO DAMAGE THE DISPLAY FLEX!
Use a Front Opening Tool to remove the Display 2.41 TFT.
2.8 LCD Support Sheet
Use a blunt pair of Tweezers to remove the LCD Support
Sheet.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 14(87)
2.9 PBA Key Flex Flip Complete
Use a Flex Film Assembly Tool to remove the Foil Adhesive
Single Side 0.15 mm Flip Tape
Use a Front Opening Tool to unsnap the PBA Key Flex Flip
Complete connector
Use a Flex Film Assembly Tool to disconnect the Slider
FPC Assy from the PBA Key Flex Complete
Use a Front Opening Tool to loosen the GPS Antenna.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 15(87)
Use a Front Opening Tool to loosen the Key B part of the
Board.
Use a Front Opening Tool to loosen the Key A part of the
Board.
Use a Front Opening Tool to loosen the GPS part of the
Board.
Use a Flex Film Assembly Tool to remove the PBA Key
Flex Flip Complete
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 16(87)
2.10 Cover Rear Assembly
Use a Flex Film Assembly Tool to loosen the Slider PPC
Assy from the Cover Rear Assembly
Use a Screwdriver with JCIS Bit to remove the four Flat
Head M1.4x1.7
Use a Flex Film Assembly Tool to loosen the Slider PPC
Assy from the back of the Cover Rear Assembly
Use your fingers to remove the Cover Rear Assembly
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 17(87)
2.11 Cover Base Rear Assembly
Use a Screwdriver with T5 Bit to remove the two Screws
Torx 5.0x1.6.
Use a Screwdriver with T6 Bit to remove the two Screws
Torx 5.3x1.6.
Use a Guitar Pick to loosen the Cover Base Rear Assembly
on three sides
Use your fingers to remove the Cover Base Rear Assembly.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 18(87)
2.12 Main PBA
Use a Front Opening Tool to disconnect the Numeric Key
Foil Connector from the Main PBA
Use a Flex Film Assembly Tool to pull the Numeric Key Foil
out of the camera key switch supporter.
Use a Pair of ESD Tweezers to loosen the BT/WLAN
Antenna
BE VERY CAREFUL NOT TO DAMAGE THE MAIN PBA SWITCHES
WHEN LOOSENING THE MAIN PBA!
Use a Front Opening Tool to bend the Carrier Base
Assembly away from the Main PBA and loosen the Main
PBA.
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 19(87)
Use a Front Opening Tool to bend the Carrier Base
Assembly away from the Main PBA and loosen the Main
PBA.
BE VERY CAREFUL NOT TO DAMAGE THE MAIN PBA SWITCHES
WHEN REMOVING THE MAIN PBA!
Use a Front Opening Tool to bend the Carrier Base
Assembly away from the Main PBA and loosen the Main
PBA.
BE VERY CAREFUL NOT TO DAMAGE THE SLIDER FPC ASSY!
Use your fingers to gently thread the Slider FPC Assy
through the gap
Use A Flex Film Assembly Tool to Loosen the Slider FPC
Assy Adhesive from the 100 pin FPC connector
BE VERY CAREFUL NOT TO DAMAGE THE SLIDER FPC ASSY!
Company Internal ©Sony Ericsson Mobile Communications AB

Working Instruction, Mechanical
1218-1731 Rev 3 20(87)
Use a Front Opening Tool to unhook the board to flex
connector from the Main PBA.
Use a Flex Film Assembly Tool to remove the Slider FPC
Assy from the Main PBA
BE VERY CAREFUL NOT TO DAMAGE THE SLIDER FPC ASSY!
2.13 Loudspeaker Assembly
Use a Front Opening Tool to release the snap hooks and
remove the Loudspeaker Assembly.
Company Internal ©Sony Ericsson Mobile Communications AB