Sony RNPK-4 Reference guide

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Use this manual if you encounter any problems or have any questions when using your REON POCKET.
Using REON POCKET TAG
For information on how to use REON POCKET TAG, RNPT-1 (sold separately or included with the RNPK-4T), refer
to the Help Guide at this link.
Before use
Checking the package contents
Names of parts
Charging
Charging the unit
Battery duration
Checking the remaining battery level
Installing the dedicated app “REON POCKET”
Installing the “REON POCKET” app
Overview of the “REON POCKET” app screen
Preparations
Using the unit with the dedicated neckband
Using the unit by holding it in your hand
COOL and WARM settings
1

E-992-100-12(1) Copyright 2023 Sony Group Corporation
SMART COOL settings
WARM settings
SMART WARM settings
SMART COOL ⇔ WARM settings
Using MY MODE
Using FAN mode
Starting and stopping without using app
Starting/stopping operation by attaching/detaching (AUTO START/STOP)
Starting operation with the button on the unit (QUICK LAUNCH)
Power off function
Registering and initializing
Unregistering the unit
Controlling the unit with another smartphone
Initializing the unit
Precautions and specifications
Precautions
Notes on cleaning
Specifications
Trademarks and copyrights
Notes on the License
Troubleshooting
When the unit cannot be operated or charged
When the LED flashes in red
Checking the support site (FAQ and other)
Contact information
2

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Before use
Notice on use
The REON POCKET is intended for use in daily outings, commuting, and light exercise (e.g. walking, golfing). Please
note that this product is not waterproof.
Please refrain from using the product in the following environments.
Strenuous work or exercise (e.g. running) at a level that causes intense sweating
Rain, snow, or other conditions where the unit is exposed to moisture
Prolonged use under hot sun
Since the product is a precision device, do not subject the product to strong impacts such as dropping or throwing it.
When the unit is operated with the setting [COOL], warm air may be ventilated from the air vent depending on the
temperature of the surrounding environment. If you are concerned about this, lower the temperature setting level of
[COOL], or refrain from using the unit.
When using in [COOL] mode
Wear breathable and loose-fitting clothing.
When you wear a collared shirt over the unit, position the neckband by aligning the top of the case with the height of
the collar so that the collar does not block the air vent of the unit.
Be sure to create adequate room around your neck by taking off your tie, opening the top button of your shirt, etc.
This will improve air flow from the air vent.
Wear white or other light-colored clothing that absorbs less heat from the sun than dark clothing.
Do not intentionally block the air inlet or air vent.
Do not use the unit when sleeping.
When using in [WARM] mode
If the unit feels too hot, stop using it immediately.
Do not use the unit when sleeping.
Notice on heat stroke
The REON POCKET is not intended to be used as a heat stroke prevention device.
Please refer to the information website of Ministry of the Environment, Government of Japan for guidelines on daily living
to prevent heat stroke.
Air temperature
(typical value)
Guideline for life
activities that need
attention
Precautions
Danger
(above 35°C)
Risks in all life activities
The elderly are at high risk of developing heat stroke, even in a
resting state. Avoid going outside as much as possible and move
to a cool room.
Severe Warning
(31°C — 35°C)
Avoid hot sun when going out, and be careful of rising room
temperature when indoors.
Warning
(28°C — 31°C)
Risks in moderate or
increased life activities
Take regular and sufficient rest when exercising or doing
strenuous work.
3

From the website “Heat Illness Prevention Information,” Ministry of the Environment, Government of Japan
Notice about water
When your hands are wet, do not touch the unit or the supplied USB cable, and do not charge the unit.
E-992-100-12(1) Copyright 2023 Sony Group Corporation
Air temperature
(typical value)
Guideline for life
activities that need
attention
Precautions
Caution
(below 28°C)
Risks in strenuous life
activities
Generally, there is little danger, but there is a risk of occurrence
during strenuous exercise or heavy labor.
4

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Checking the package contents
If anything is missing, consult Sony Hong Kong Customer Service Centre.
The number in the parentheses indicates the number of pieces.
RNPK-4
The unit is attached to the neckband at the time of purchase.
REON POCKET unit (RNP-4) (1)
Neckband (RNPB-3) (1)
L-shaped USB Type-C® cable (USB-A — USB-C®) (1)
Air vent cover (1)
Startup Guide (1)
Warranty card (RNP-4) (valid only in Japan) (1)
USB AC adaptor is not included. Use a commercially available USB AC adaptor.
Using the air vent cover
Use the air vent cover if the exhaust from the air vent at the top of the unit is bothersome because it is blowing at your
head or neck, or if the exhaust is blocked by the collar of your shirt.
For details on how to use the air vent cover, refer to the support site.
https://reonpocket.sony.com/en-hk/support/rnpk-4/
RNPK-4T
The unit is attached to the neckband at the time of purchase.
REON POCKET unit (RNP-4) (1)
Neckband (RNPB-3) (1)
REON POCKET TAG (Tag) (RNPT-1) (1)
Lithium coin cell battery (CR2032) (inserted in the tag) (1)
L-shaped USB Type-C® cable (USB-A — USB-C®) (1)
Air vent cover (1)
Startup Guide (RNPK-4) (1)
Startup Guide (RNPT-1) (1)
Warranty card (RNP-4) (valid only in Japan) (1)
Warranty card (RNPT-1) (valid only in Japan) (1)
USB AC adaptor is not included. Use a commercially available USB AC adaptor.
Using the air vent cover
Use the air vent cover if the exhaust from the air vent at the top of the unit is bothersome because it is blowing at your
head or neck, or if the exhaust is blocked by the collar of your shirt.
For details on how to use the air vent cover, refer to the support site.
https://reonpocket.sony.com/en-hk/support/rnpk-4/
RNP-3
5

REON POCKET unit (1)
L-shaped USB Type-C® cable (USB-A — USB-C®) (1)
Silicone coated sticker (1)
Startup Guide (1)
USB AC adaptor is not included. Use a commercially available USB AC adaptor.
Using the silicone coated sticker
If you are concerned about direct contact of the metal part of the unit (cooling/warming section) with your skin, use the
unit with the silicone coated sticker attached.
For details on how to attach the silicone coated sticker, refer to the support site.
https://reonpocket.sony.com/en-hk/support/rnpk-4/
E-992-100-12(1) Copyright 2023 Sony Group Corporation
6

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Names of parts
RNPK-4/RNPK-4T
For details on “Names of parts” of REON POCKET TAG (sold separately or included with the RNPK-4T), refer to the
following Help Guide.
https://helpguide.sony.net/reonpocket/rnpt1/v1/en/index.html
RNP-3
Air vent1.
Button with an LED2.
USB port3.
Air inlet4.
Band5.
Case6.
Cooling/warming section
(Material: Stainless steel SUS316L)
7.
Button with an LED1.
USB port2.
7

E-992-100-12(1) Copyright 2023 Sony Group Corporation
Air inlet3.
Air vent4.
Cooling and warming section
(Material: Stainless steel SUS316L)
5.
8

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Charging the unit
The unit has a lithium-ion battery. When you use the unit for the first time or have not used it for a long time, charge the
unit for 30 minutes or more.
Cooling or warming is possible while the unit is being powered by a USB connection with a portable battery, computer or
a USB AC adaptor. (The built-in battery of the unit is not charged during cooling or warming.)
Note
Be sure to use a portable battery or a USB AC adaptor that has an overcurrent protection function.
Charge the battery in an ambient temperature of 5°C to 40°C.
Do not touch the unit, USB cable, or USB AC adaptor with wet hands.
Related Topic
Battery duration
The shape of the unit differs depending on the model.
Connect the supplied USB cable to the USB port of the unit.
1
Connect a USB AC adaptor that you have (a) and the supplied USB cable to the wall outlet.
The LED lights up in red and charging starts.
2
When the LED turns off, disconnect the USB cable from the unit and the USB AC adaptor.
The LED turns off when charging is complete.
When charging starts from a discharged state, the battery charges as follows.
RNPK-4/RNPK-4T: 90% charged in about 100 minutes; fully charged in about 170 minutes.
RNP-3: 90% charged in about 60 minutes; fully charged in about 100 minutes.
(The charging time may vary depending on the USB AC adaptor you are using.)
3
9

Checking the remaining battery level
E-992-100-12(1) Copyright 2023 Sony Group Corporation
10

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Battery duration
The amount of time that the unit can be used with one full charge
The following is the guideline for battery duration for each temperature level during cooling or warming operations.
The values for the [COOL] mode are guidelines for when you use the unit while staying still in an environment with a
room temperature of 30°C.
The battery duration varies depending on the usage and environment.
When using in [COOL] mode
RNPK-4/RNPK-4T
Level 1: About 9 hours
Level 2: About 8 hours
Level 3: About 7 hours
Level 4: About 4 hours
RNP-3
Level 1: About 4 hours and 30 minutes
Level 2: About 4 hours
Level 3: About 3 hours and 30 minutes
Level 4: About 2 hours
When using in [WARM] mode
RNPK-4/RNPK-4T
Level 1: About 8 hours
Level 2: About 6 hours
Level 3: About 5 hours
Level 4: About 4 hours
RNP-3
Level 1: About 4 hours
Level 2: About 3 hours
Level 3: About 2 hours and 30 minutes
Level 4: About 2 hours
Hint
In the case of continuous use, operation will be paused at the following times.
When using in [COOL] mode: About 8 hours
When using in [WARM] mode: About 1 hours
Related Topic
Charging the unit
Checking the remaining battery level
11

E-992-100-12(1) Copyright 2023 Sony Group Corporation
12

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Checking the remaining battery level
You can check the battery level of the unit by the battery icon on the “REON POCKET” app.
A: Full
B: Low
Note
The correct remaining battery level may not be displayed under some operating or environmental conditions.
To check the remaining battery level on the unit
Press the button on the unit, and the LED blinks in orange for the number of times according to the remaining battery
level.
Blinks 4 times: Full
Blinks 1 time: Low
Related Topic
Charging the unit
Battery duration
Overview of the “REON POCKET” app screen
E-992-100-12(1) Copyright 2023 Sony Group Corporation
13

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Installing the “REON POCKET” app
Install the “REON POCKET” app on your smartphone. After the installation, register the unit to your smartphone via
Bluetooth® connection on the initial setup screen.
Note
In advance, turn on the Bluetooth function on your smartphone.
If you are using an Android smartphone, allow the “REON POCKET” app to access the location information.
Hint
If the connection between your smartphone and the unit is not stable, bring them closer to stabilize the connection.
E-992-100-12(1) Copyright 2023 Sony Group Corporation
Download the “REON POCKET” app from Google Play or the App Store and install it.
https://reonpocket.sony.com/en-hk/app/download/
1
Launch the “REON POCKET” app and follow the on-screen instructions to perform the initial setup.
Proceed with the initial setup by following the on-screen instructions. When the Bluetooth connection between the
unit and your smartphone is established, the unit is registered to your smartphone. The LED on the unit lights up in
blue for about 8 seconds and then goes off.
The [SMART COOL] screen of the “REON POCKET” app appears when the initial setup is complete.
2
14

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Overview of the “REON POCKET” app screen
This page introduces items common to each mode of the app.
The SMART COOL screen (RNPK-4) is used as an example. For the specific items in each mode, refer to the respective
pages.
Settings icon
Tap to configure the various settings (such as [AUTO START/STOP], [QUICK LAUNCH], [MY MODE CONTROL],
and [FAN CONTROL]), to unregister or to initialize the unit, and to check the versions of the unit and the app.
1.
Temperature indication of the cooling/warming section
Indicates the guideline for the temperature of the contact surface of the unit. Tap to show the details of the
temperature of the contact surface, as well as tips and notes.
2.
AUTO START/STOP icon
Indicates that the AUTO START/STOP function is active.
3.
Battery icon
Indicates the remaining battery level of the unit.
4.
Mode icons
(COOL): Tap to switch to the SMART COOL screen for using in cooling operation.
SMART COOL settings
(FAN): Tap to switch to FAN mode.
Using FAN mode
5.
15

Hint
You can choose to show or hide the FAN icon. Tap (Settings icon) － [FAN CONTROL].
You can choose to show or hide the MY MODE icon. Tap (Settings icon) － [MY MODE CONTROL].
Related Topic
SMART COOL settings
WARM settings
SMART WARM settings
SMART COOL ⇔ WARM settings
Using FAN mode
Using MY MODE
Checking the remaining battery level
E-992-100-12(1) Copyright 2023 Sony Group Corporation
(SMART COOL ⇔ WARM)*: Tap to switch to the SMART COOL ⇔ WARM screen, which automatically switches
between cooling operation and warming operation.
SMART COOL ⇔ WARM settings
(MY MODE): Tap to switch to MY MODE.
Using MY MODE
(WARM): Tap to switch to the WARM screen for using in warming operation.
WARM settings
SMART WARM settings*
Temperature/humidity*
Displays the temperature and humidity measured by REON POCKET TAG (sold separately or included with the
RNPK-4T).
6.
REON POCKET TAG (sold separately or included with the RNPK-4T) is required to use this function. For details on how to use REON POCKET
TAG, refer to the following Help Guide.
https://helpguide.sony.net/reonpocket/rnpt1/v1/en/index.html
*
16

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Using the unit with the dedicated neckband
You can use the unit while hanging it around your neck by attaching the unit to the dedicated neckband.
RNPK-4/RNPK-4T: The unit is attached to the neckband at the time of purchase. Wear the neckband with the unit
attached to your neck as is.
RNP-3: The dedicated neckband (sold separately) is required.
For details on how to use the dedicated neckband, refer to the support site.
https://reonpocket.sony.com/en-hk/support/rnpb-n2/
E-992-100-12(1) Copyright 2023 Sony Group Corporation
17

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
Using the unit by holding it in your hand
You can use the unit by holding it and putting the cooling/warming section to your skin without attaching the unit to the
dedicated neckband.
RNPK-4/RNPK-4T: The unit is attached to the neckband at the time of purchase. Detach the unit from the neckband
in advance.
To detach the unit from the neckband (RNPK-4/RNPK-4T)
Hold the case (a) of the neckband and push the cooling/warming section of the unit with a small amount of force.
To attach the unit to the neckband, place the bottom part of the unit inside the case of the neckband, and then push the
upper part of the unit into the case until it clicks.
When carrying the unit
When carrying the unit in a bag, it is recommended to put the unit in a small pouch to prevent sharp objects such as a
key from scratching the cooling/warming section.
Note
Do not operate the button of the unit with wet hands.
E-992-100-12(1) Copyright 2023 Sony Group Corporation
18

Help Guide
Wearable Thermo Device Kit/Wearable Thermo Device Sensing Kit/Wearable Thermo Device
RNPK-4/RNPK-4T/RNP-3
SMART COOL settings
This page introduces basic use to make the cooling/warming section cool (SMART COOL MODE).
In SMART COOL MODE, the unit automatically adjusts the temperature of the cooling/warming section according to the
temperature inside your clothes, your movements such as walking or staying still, and your temperature preference.
When the temperature is at an appropriate level due to the temperature inside your clothes and the cooling/warming
section, the unit may pause the cooling operation automatically to save power.
On the “REON POCKET” app screen, tap (COOL icon).
1
If the above screen is not displayed, tap [ON].
2
Tap [OPTION].
3
Set the temperature preference.
Once the setting is made, cooling operation will start. The unit automatically adjusts the temperature of the
cooling/warming section.
Target temperature ( -a): Indicates the target temperature range of the cooling/warming section (depending
on the temperature preference that you have set).
Unit icon ( -b): Indicates the current temperature of the cooling/warming section. The circle around the unit
icon indicates the intensity of cooling. When the unit automatically pauses the cooling operation to save power,
the icon becomes translucent.
4
To stop cooling, tap [OFF].
5
19

Using in MANUAL MODE
In MANUAL MODE, the cooling strength is kept at the selected temperature level.
Tap [MANUAL], and then tap the desired temperature level.
The temperature level changes as follows.
[1] (low) → [2] (medium) → [3] (strong) → [4] (maximum)
When the unit is powered by USB connection, level [4] becomes level [4+] and cooling will be stronger.
Using in WAVE MODE
WAVE MODE automatically controls the cooling strength by making it go up and down. This mode is recommended
when it is difficult for you to feel the cooling effect due to continuous usage of strong cooling modes.
When using in MANUAL MODE, tap the desired temperature level, and then tap [WAVE].
The cooling strength goes up and down around the selected temperature level.
Note
When the following abnormalities are detected, the cooling operation automatically stops (the LED flashes in red for about 8
seconds).
The temperature inside the unit rises more than expected.
The temperature of the cooling/warming section drops more than expected.
The fan inside the unit is not working properly.
For details, refer to “When the LED flashes in red.”
Hint
The exhaust volume of the fan is automatically controlled according to the temperature inside the unit.
You can stop cooling by pressing and holding the button on the unit for about 2 seconds. It is useful when your smartphone is
running out of battery.
You can set a series of actions to alternate between cooling and warming (MY MODE).
Related Topic
WARM settings
SMART WARM settings
Using MY MODE
E-992-100-12(1) Copyright 2023 Sony Group Corporation
20