Design and Specifications subject to change without notice.
2003 SONY MOBILE
PRODUCT GUIDE
Other Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL ARMONIC DISTORTION
200 watts minimum continuous average power into 4 ohms, 20 z to 300 z with no more than
0.2% total harmonic distortion per Car Audio Ad oc Committee Standards.
Circuit system Class D Technology
Pulse power supply
Inputs RCA pin jacks
igh level input connector
Input level adjustment range 0.3 6.0 V (RCA pin jacks) 1.2 12.0 V (high level input)
Outputs Speaker terminals, Through out pin jacks
Suitable speaker impedance 2 8 W
Maximum outputs 400 W (at 4 W)
800 W (at 2 W)
Rated outputs (supply voltage at 14.4 V) 200 W (20 z - 300 z, 0.2% T D, at 4 W)
400 W (20 z - 300 z, 0.6% T D, at 2 W)
Frequency response 5 z 300 z (+0.5 dB, -3 dB)
armonic distortion 0.06% or less (at 100 z, 4 W)
Low-pass filter 50 - 300 z, 12 dB/oct
Low Boost 0 - 10 dB (40 z)
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5 16 V
Current drain at rated output: 62 A (at 2 W)
Remote input: 2 mA
Dimensions Approx. 295 × 57 × 290 mm (11 5/8 × 2 1/4 × 11 1/2) (w/h/d)
not incl. projecting parts and controls
Mass Approx. 2.8 kg (6 lb. 3 oz.) not incl. accessories
Supplied accessories Mounting screws (5)
igh level input cord (1)
Protection cap (1)
XM-D400P5
1 Channel Mono Amplifier
800W max power
200W x 1 RMS into 4W 20 z - 300 z @0.2% T D
400W x 1 RMS into 2W 20 z - 300 z @0.6% T D
Class D
Variable 50 - 300 z 12dB/oct Low Pass Filter
40 z EQ Boost
RCA and Speaker Level Inputs
