Sony Bravia KLV-20G400A User manual

KLV-20G400A
3-297-680-11(1) Making Audio/Video Connections
Your new TV includes various types of video inputs and analog audio jacks.
Use the outputs/inputs that are available on your components that provide the best audio/
video performances:
Audio connector type Best Audio/Video
Performance
Video connector type
Analog Audio Component video
S VIDEO
Composite video
The connection diagrams shown on the reverse side are recommendations only; other possible
solutions may exist. Connections that include an AV receiver can often be complex, so check your AV
receiver’s instruction manual for additional details.
See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need.
Depending on the components you plan to connect, you may need to purchase extra cables.
Running Initial Setup
1Press
POWER
to turn on the TV.
e Initial Setup screen appears.
2Press /to highlight the on-screen display language.
en press .
e message “First please connect cable/antenna. Do
you want to start Auto Program?” appears.
3Press /b to highlight “OK” then press .
To run Auto Program again at a later time
Refer to the manual’s “Initial Setup” and “Auto Program” sections.
~
~
Please select your language
Initial Setup
English
Español
Français
Please select your language
Initial Setup
English
Español
Français
Auto Program
Programmed Channel: 10
Now tuning
Auto Program
Programmed Channel: 10
Now tuning
For Your Convenience
Please contact Sony directly if you have questions on the use of your television
after reading your Quick Setup Guide and Operating Instruction Manual.
Contact Sony Customer Support at:
http://www.sony.com/tvsupport
Or to speak with a support representative:
Canada
1-877-899-SONY (7669)
Please Do Not Return the Product to the Store
©2008 Sony Corporation Printed in China
Quick Setup Guide
For further information, see the Operating Instruction Manual supplied with the TV.
Please retain this guide for your future reference.

KLV-20G400A EN 3-297-680-11(1)
L
AUDIO
AUDIO
R
L
R
AUDIO OUT
VIDEO IN
1 2
P
Y
B
PR
(576p/576i/
480p/480i)3
COMPONENT IN
VIDEO
S VIDEO
L
AUDIO
(MONO)
R
SERVICE
ONLY
CABLE/ANTENNA
Cable/
Antenna
Use this diagram if you have;
L
AUDIO
AUDIO
R
L
R
AUDIO OUT
VIDEO IN
1 2
P
Y
B
PR
(576p/576i/
480p/480i)3
COMPONENT IN
VIDEO
S VIDEO
SERVICE
ONLY
L
AUDIO
(MONO)
R
CABLE/ANTENNA
Cable/
Antenna
Cables Required
Splitter 1
Coaxial 4
Composite 2
Component 1
Audio 2
Optical Audio 1
ACables Required
Splitter 1
Coaxial 3
Composite 1
Component 1
Audio 1
Use this diagram if you have;
or
B
If you are not using a cable box
or satellite receiver, connect your
cable to the VCR’s RF IN jack.