Sony CLM-FHD5 User manual

GB
FR
CLM-FHD5
4-572-803-11(1)
Clip-on LCD
Monitor
Moniteur LCD avec
attache clip
Operating Instructions
Mode d’emploi
Accessory Shoe

2-GB
Before operating the product, please read this manual thoroughly and
retain it for future reference.
WARNING
To reduce the risk of fire or electric shock,
1) do not expose the unit to rain or moisture.
2) do not place objects filled with liquids, such as vases, on the
apparatus.
CAUTION
Replace the battery with the specified type only. Otherwise, fire or injury
may result.
Do not expose the batteries to excessive heat such as sunshine, fire or
the like.
Excessive sound pressure from earphones and headphones can cause
hearing loss.

3-GB
IMPORTANT SAFETY
INSTRUCTIONS
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings.
•Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
•Unplug this apparatus during lightning storms or when unused for
long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

4-GB
For Customers in the U.S.A.
CAUTION
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

5-GB
For Customers in Europe
Notice for the customers in the countries applying
EU Directives
Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075
Japan
For EU product compliance: Sony Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Germany

6-GB
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other
European countries with separate collection
systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. The recycling of materials
will help to conserve natural resources. For more
detailed information about recycling of this
product, please contact your local Civic Office, your
household waste disposal service or the shop where
you purchased the product.

7-GB
Identifying the parts ..................................................................................... 8
Preparation
Before use ..................................................................................................... 9
Checking the accessories.............................................................................10
Preparing power ..........................................................................................10
Attaching the battery........................................................................10
Connecting to an AC adaptor ...........................................................13
Attaching to the camera..............................................................................13
Adjusting the direction of the screen..........................................................15
Attaching the sun shade hood....................................................................16
Using the monitor
Using the monitor........................................................................................18
Enlarging images ..............................................................................18
Setting with the menu ......................................................................19
Peaking............................................................................................. 23
False Color ........................................................................................ 24
Video Level Marker........................................................................... 26
Seeing the S-Log image in natural brightness
(S-Log Disp. Assist)............................................................................27
TV display area (Marker display)...................................................... 28
Others
Troubleshooting.......................................................................................... 29
Precaution ....................................................................................................31
Specifications.............................................................................................. 33
Table of contents
GB

8-GB
The number in parentheses is a
reference page.
LCD screen
Tripod receptacle
Power lamp (12)
(ON/STANDBY) button
Monaural speaker
Custom button (C1/C2) (22)
MENU button (19)
ZOOM/SELECT button
Enlarge button (18),
For MENU display:
Enter button (19)
Battery pack terminal
Battery release lever
Headphone jack
You can connect headphones
with a 3.5 mm stereo mini-jack
to listen to sound.
•No sound comes from the
speaker when headphones are
connected.
HDMI (Type A)
DC IN jack
Tripod receptacle
Identifying the parts
 










9-GB
Preparation
Power lamp 
You can check the status of this
unit with the power lamp.
Green (lit):
Turning on or power is on.
(Operated by battery)
White (lit):
Turning on or power is on.
(Operated by AC adaptor)
Red (lit):
Battery level is low.
Red (flashing rapidly):
Batteries have run out.
Off:
Turning off or power is off.
Before use
Preparation
Read this instruction manual
together with the instruction
manual of your camera.
This unit is not dust-proof,
splash-proof or waterproof.
Do not place this unit in the
following locations
Regardless of whether this unit is
in use or in storage, do not place
it in any of the following locations.
Doing so may lead to a malfunction.
•Placing this unit in locations
subject to direct sunlight such as
on dashboards or near a heater
may cause this unit to deform or
malfunction.
•Locations with excessive vibration
•Locations with strong
electromagnetism
•Locations with excessive sand
In locations such as the seashore
and other sandy areas or where
dust clouds occur, protect the unit
from sand and dust. This may lead
to a malfunction.

10-GB
Checking the
accessories
Check that the following
accessories are supplied. If
anything is missing, contact your
dealer of Sony.
•Shoe adaptor (1)
•Sun shade hood (1)
•Battery adaptor (1)
•HDMI cable (Mini HDMI)
(Approx. 45 cm, Type A 
Type C) (1)
•HDMI cable (Micro HDMI)
(Approx. 45 cm, Type A 
Type D) (1)
•Carrying pouch (1)
•Set of printed documentation
Attaching the
battery
The Sony rechargeable battery
packs M series, V series W series
(not supplied) can be used with
this unit. You cannot use other
battery packs because this unit
will not work properly with them.
Notes
When using NP-QM71D, NP-QM91D,
NP-FV100 or NP-FV100A, attach the
camera to a tripod first.
Battery Adapter
When using a rechargeable
battery pack W series, you need
the battery adaptor supplied with
this unit.
Preparing power

11-GB
Preparation
Attach the battery to the
battery adaptor.
2
1
1
2
Note
The battery adaptor is specially
designed for this unit. Using it with
another device may cause the
device to malfunction.
Attach the fully charged battery
to this unit.
Push the battery in gently, then
slide it in the direction illustrated
while still pushing.
There is a click as the battery is
fixed into place.
* If sliding the battery diagonally, it
may not be fixed.
To remove the battery
Slide the battery in the direction
illustrated while sliding the
battery release lever in the
direction illustrated. The battery
pack comes away from this unit.
When removing the battery, be
careful not to drop it.
continued

12-GB
Battery life (Approx.)
(When using this unit
continuously at 25 °C (77 °F)
with a brand-new battery
attached and connecting to
the camera via HDMI)
NP-FM500H: 120 minutes
NP-QM71D: 210 minutes
NP-QM91D: 390 minutes
NP-FW50: 60 minutes
NP-FV50: 50 minutes
NP-FV70: 130 minutes
NP-FV100: 200 minutes
NP-FV100A: 300 minutes
* The battery life is rough time
when you use fully-charged
batteries. It may differ
depending on operating and
environmental conditions.
To check the remaining
battery power
You can check the remaining
battery power with the power
lamp color etc.
Power lamp
Green (lit):
Battery level is enough.
Red (lit):
Battery level is low.
Red (flashing rapidly):
Batteries have run out. The power
to this unit automatically turns off
about 10 seconds later.
* The lighting time when the battery
level is low may differ from the
preceding time depending on the
kind of batteries or environmental
conditions.

13-GB
Preparation
Connecting to an AC
adaptor
This unit can be powered from
the domestic power supply using
a Sony AC adaptor the
AC-PW10AM (not supplied).
AC-PW10AM
Notes
•A battery pack attached to this
unit is not recharged even when
an AC adaptor is connected.
•If this unit is connected to an AC
adaptor while a battery pack is
attached, the AC adaptor power
source takes priority.
•Do not remove the battery and AC
adaptor when turning this unit on
or off. This may cause malfunction.
•Use the nearby wall outlet (wall
socket) when using the AC
adaptor. If any trouble occurs
while this unit is in use, unplug it
from the wall outlet (wall socket)
to disconnect the power.
Attaching to the
camera
Connect the shoe adaptor to this
unit and then attach it to the
camera.
Note
Do not attach a shoe adaptor except
for this unit.
1 Insert the tripod screw of the
shoe adaptor into the tripod
receptacle of this unit.
Insert the screw of the shoe
adaptor into the receptacle of
the unit for the screw.
2 Turn the shoe adaptor dial to
lock.
3 Attach (clip) the shoe adaptor
onto the camera shoe, as
illustrated.
Insert the foot of the shoe
adaptor in the direction
illustrated.
continued

14-GB
Rotate the dial of the shoe
adaptor fully in the (LOCK)
direction to fix it firmly to
the camera.
When attaching to a camera
read the instruction manual of
the camera too.
Notes
•If using a camera equipped with a
pop-up built-in flash, be careful of
the following:
– Always close the built-in flash of
the camera. If your camera has a
built-in auto flash function, turn
that function off.
– Before using the flash, remove
this unit from the camera.
•Make sure this unit is firmly
fixed to the camera before use
to prevent this unit from falling
during shooting.
4 Connect this unit to the
camera with the correct type
of HDMI cable supplied.
•If the cable is not long enough,
use a Sony HDMI cable (not
supplied).
Notes
•When this unit is connected to
the camera by the HDMI cable,
the following may happen
depending on the camera.
– No image appears on the
camera’s LCD screen.
– The camera switches to
playback mode. (Make sure
the camera is in shooting
mode before taking
pictures.)
•After a certain time in either of
the following conditions, the
backlight of this unit turns off.
– No HDMI signal is output
from the camera
– The HDMI cable is
disconnected

15-GB
Preparation
Carrying out the following
turns the backlight on again.
– Press either the C1 button,
C2 button, MENU button or
ZOOM/SELECT button.
– Operate the camera so that
an HDMI signal is output.
– Reconnect the HDMI cable
and turn the camera on.
To remove from the camera
Disconnect the HDMI cable and
then remove this unit from the
shoe of the camera.
Rotate the dial of the shoe
adaptor fully in the opposite
direction to (LOCK) to release
the lock.
Check that the lock is released
before sliding the shoe
adaptor toward you.


Adjusting the
direction of the screen
The pan and tilt function of the
shoe adaptor lets you move
the screen of this unit in any
direction.
Approx. 90 degrees
forwards or backwards
Approx. 180
degrees left
or right
Notes
•Depending on your battery
pack and camera, this unit may
interfere with the built-in flash. Do
not pan or tilt with excessive force.
•Be careful when you pull the HDMI
cable not to stretch it or get it
caught in any movable part.

16-GB
Attaching the
sun shade hood
The sun shade hood protects
from the sunlight reflection and
make it more visible.
1 Align the clips on the frame of
the sun shade hood with the
holes in the outer frame of
this unit and attach.
Fit the right part of the panel
first and then press in the left
part of the panel.
2 Open the sun shade hood as
illustrated.
Top panel
Side panel
To close the sun shade
hood
Close the sun shade hood
according to the procedure as
illustrated.
To remove the sun shade
hood
Pull the left part of the sun shade
hood frame towards you to
remove it.

17-GB
Preparation
If the hood panels come
away from the frame
A force applied to the top or side
hood panels can detach them
from the frame to prevent them
from breaking.
•If the side panels come away
from the frame
Remove the top panel.
Attach the side panels.
Push the projecting end of the
spring into the middle groove
along the side of the frame, and
fit the projections of the side
panel into the top and bottom
grooves along the side of the
frame.
Notes
The side panels only open if the
projecting end of the spring is
placed correctly into the groove. If
the panels do not open, reattach the
spring so that its projecting end is in
the groove.
•If the top panel comes away
from the frame
Fit the projection of the top panel
into the groove along the top of
the frame as illustrated.

18-GB
Using the monitor
Using the
monitor
1 Turn on the power to the
camera and this unit.
Press and hold down the
power button to turn this
unit on.
Press and
hold
The viewfinder image of the
camera is displayed on the LCD
screen of this unit.
To turn the camera’s power on,
check the instruction manual
of your camera.
When the power of this unit is
on, you can turn off the power
by pressing and holding the
power button .
Notes
•If the image resolution is
“1,920× 1,080” or lower, the image
is automatically enlarged (Auto
zoom function).
•The aspect ratio of this unit is 16:9.
Images that have other aspect
ratios may be displayed with black
stripes.
Image example) 3:2
Enlarging images
You can enlarge the part of the
displayed image.
1 Press the center of the ZOOM/
SELECT button when the
image is displayed.
Each time you press the
button, the magnification
cycles through ×3 ×6 ×1
(or ×1.3). (Page 21)

19-GB
Using the monitor
continued
2 Press ///of the ZOOM/
SELECT button to display the
desired position of the image.
When you enlarge the image
×3 or ×6, you can check the
place of the enlarged image
using the small map.
1 Magnification
Displays the current magnification.
2 Small map
Displays a map (5 x 5) which shows
the enlarged part.
3 Moving guide (Up/Down/Left/Right)
1
2
3
Note
Depending on the magnification
or the kind of input signal, the
enlargeable range may be limited.
When using ×6, the enlargeable
range is limited in all input signals.
When using ×3, the enlargeable
range is limited in input signal of
1080/24p.
The enlargeable range
The non-enlargeable range
* The illustration is only a representation.
Setting with the
menu
You can set the simple settings
such as sound volume or
brightness of the screen and the
advanced settings such as color
temperature or S-Log Disp. Assist.
1 Press the MENU button of this
unit.
The MENU appears on the
right of the screen.

20-GB
2 Press /of the ZOOM/
SELECT button to align the
cursor with the icon of the
function you want to use.
Cursor
MENU
For details of each icon, see
pages 21, 22.
3 Press the center of the ZOOM/
SELECT button.
Repeat step 2 and 3 until the
desired function or the desired
setting appears.
4 Press /of the ZOOM/
SELECT button to select the
desired setup detail or the
desired setting.
5 Press the center of the ZOOM/
SELECT button.
The desired setting is saved
and returns to the MENU.
Note
If you press the MENU button before
step 5, the setting is canceled.
Pressing the MENU button will hide
the MENU if it is displayed.
Preview function
You can check the effect before
saving the settings. For details of
items applicable to the preview
function, see pages 21, 22.