Sony CFD-E10 Marketing User manual

This symbol is intended
to alert the userto the
presenceof uninsulated
“dangerousvoltage”
within theproduct’s
enclosurethatmay beof
sufficient magnitudeto
constitute arisk of
electric shock to persons.
This symbol is intcndcd
to alert the userto the
presenceof important
operatin%and
majntennnce(ser\k%p;
instructions in the
literature accompanying
ihe appliance.
with this product will increaseeye
hazard. G
Do not install the appliancein a
confined space.suchasa
bookcaseor built-in cabinet.
To prevent he or shockhazard.
do not placeobjectsfilled with
liquids, suchasvases.on the
appliance.
or ckls%omers in %h@us
This equipmenthasheentested
andfound to comply with the
limits for aClassB digital device.
pursuantto Part 15of the FCC
Rules.Theselimits aredesigned
to provide reasonableprotection
againstharmful interferencein a
residential installation. This
equipmentpencrates.usesandcan
radiateradio frequency energy
and,if not installed andusedin
accordancewith lhe instructions.
mw causeharmful interfel-enceto
radio communications. However.
there is no guaranteethat
interferencewiil not occur in a
parliculai-installation. If this
equipmentdoescauseharmlui
interCerenceto radio or t&vision
reception,which canbe
determinedby turning the
equipmentoFfandon, theuseris
encouragedto try to correct the
intsrfel-enceby oneor more of the
following measures:
-Reorient or relocatethe
receiving antenna.
-increase the separation
betweentheequipmentand
receiver.
--Connect theequipmentinto an
outlet on acircuit different
rrom that to which the receiver
is connected.
--Consult the dealeror an
experiencedradio/TV
technician Carhelp.
You arecautionedthat any
changesor modificaiions not
cxprcssly approvedin this manual
could void your authority to
operatethis equipment.
The model numberis iocateclat
thebottom andthe serial number
is locatedin thebatlcry
compartment.
Record theserial numberin the
spaceprovided below. Referto
thesenumberswheneveryou cali
uponyour Sonydealericgarding
this product.
Model No. CFD-E10
Seriai No.

I
Specifications
General
For customers in the USA
Pleavs rcaister this oroduct OII line at htto://www.sonv.com/
produ&egistrkon.
Propel- regiwation will enable LI\ to send you periodic mailings about
new product\. \crvices and other- important announcements.
Re+tering your product will alw ;dlow us to contact you in the
unlikely event that the product needs adjustment or modification.
Thank you.
I W + I W (at 2.7 I> IO 9 harmonic
diaortion in AC operation)
Power requirements
DC IN 6 V accept\:
Supplied AC pwer adaptor lor wc
with 120 V AC. 60 H/
6 V DC. 4 \ILC AA (Rh) bxtlrlle\
Pwer corwmption
DC I I.5 W
tkntery lite
When playing a CD.
Sony R6P npproh. 2 hour\
Sony alkaline LR6: xppwx 4 hour\
Dimension\
Approx. 920 2 (2 lb.) (incl. betterle\)
Supphed acce\\ory
AC power adaptor (I )
Design and specifuutions are subject to
change without Inotice.
Optional accessorie\
Sony MDR headphone \er,es

Location of controls
fi (headphones) TUNING
EGA BASS FUNCTION
POWER
OPFUBATT
I
PLAY MODE
Display L PUSHCLOSE
CiC IN 6V ~AMSISEARCH~PLAYPAUSESTOP OPEN
* There is a tactile dot beside VOL to show the direction
to turn up the volume.
** The HI button has a tactile dot.
To listen through headphones
Connect the headphones to the il (headphones) jack
To reinforce the bass sound
Set MEGA BASS to “ON”.
To return to normal sound, set the switch to “OFF”.
Choosing Power
Sources
Connecting the AC power
adaptor
1 to DC IN 2 to a
WLlll
outlet
AC power
adaptor
(supplied)
Using the player on batteries
Insert four six AA (Rh) batteries (not supplied) into
the battery compartment.
To release the battery
Press the @ Gde of the hattery and then take out the
battery.
If the battery compartment lid comes
off
Insert the right corner of the lid and then inset-t the left
corner aligning it to the fr-oove of the battery
compartment.
Notes
* To trse the player on battrrie\. di\cunnect the AC power
adaptor from the player. The player does not operate on
batteries as long as the AC power adaptor is connected.
l Replace the batterie\ when the OPR/BATT indicator
dims or when the player \top\ operating. Replace all
batterie\ with mewones.

Playing a CD
OFF-’ LON
POWER
(OPRIBATT)
2 Press& to open the CD compartmenl
3
Place a CD in the CD compartment.
12 cm CD 8cmCD
Pushdown until it Insert aligning the
clicks into place. centerpart.
With the label side facing you
4 ‘.. Pless PUSH CLOSE to close the the lid
of the CD compartment.
1
The player plays all the tracks once.
I
i
i PLAY/PAUSE
Track number
To Do this
adjust the volume Slide VOL.
stop playback Press
n .
pauseplayback Press,II.
Prehsthe button again to resume
play after pause.
go to the next track PressHI.
go back to the PressI44.
previous track
locate a point while PressHI (forward) or I44
listening to the sound (backward) while playing until
you find the point.
remove the CD Press
n , then +.
turn off the player Set POWER to “OFF”.
To remove the CD
Be careful not to touch the
playing side (the side with
no label).
Selecting play mode
1 SetFUNCTION to “CD”.
2 PressPLAY MODE until the play mode you want
appears in the display. Then proceed asfollows:
To Selected play mode and
operation you need
repeata single track “REP I”: Select the track you
want to repeatby pressing HI
or I44 and then press,II.
repeatall tracks
shuffle play
repeattracks in
random order
“REP “: Press MI.
“SHUF “: Preay HI.
“SHUF REP “: Press HI.
To cancel selected play mode
Pre\a PLAY MODE until the <electedplay mode
disappears from the display.
About CD-Rs/CD-RWs
This CD player can play CD-Rs/CD-RWa recorded in
the CD-DA format’z’.but playback capability may vary
depending on the quality of the disc and the condition
of the recording device.
:,CD-DA ISthe abbreviation for Compact Disc DIgital
Audio. It i\ arecording standardcasedfor Audio CDs.
Listening to the
radio
1 Turn on the player.
(OPRIBATT)
2 Set FUNCTION to “FM STEREO” or
“AM”.
EOFMMONO
‘-AM
3
Turn TUNING to tune in a radio station.
,@I ’
To Do this
adjust the volume Slide VOL.
turn off the radio Set POWERto “OFF”.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself
for AM.
FM AM
lip
If theFM broadcastis noisy, setFUNCTION to “FM
MONO”. The radio will play in monaural.

Troubleshooting
1General 1
The power does not
come on.
* Connect the AC power adapt”!
SeCUdy.
* Make wre the battertes ale inserted
correctly.
* Replace all the batteries with new
ones if they are weak.
There is no audio.
. Unplug the headphones when
listening through speakers.
Noise is heard.
* Someone is tlsing a portable
telephone or other equipment that
emits radio waves near the player.
-+Move the portable telephone,
etc., away from the player.
1CD Player 1
The CD does not play
or ‘L 2’ lights in the
display even when a
CD is in place.
* Place the CD with the label wrface
facing you.
* Clean the CD.
. Take out the CD and leave the CD
compartment “pen for about an
hour to dry moisture condensation.
. The CD-R/CD-RW was not
finalized. F~nol~ze the CD-R/CD-
RW with the recording device.
. There I\ a problem with the quality
of the CD-R/CD-RW, recording
device or application software.
The sound drops out.
* Reduce the volumr.
* Clean the CD. or replace it if the
CD is badly damaged.
- Place the player in a location free
from vibration.
* Clean the lens with a commercially
avatlable blower.
- The sound may drop out or noise
may be heard when wing poor
quality CD-R&/CD-RWs or If there
i\ a problem with the recordmg
device or applicatton software.
Lens --
The audio is weak or
has poor quality.
* Replace all the batteries with new
ones if they are weak.
. Move the player away from the
TV.
The picture of your TV
becomes unstable.
* If you are listening to an FM
program near the TV with an
Indoor antenna, move the player
away from the TV.
After trying the above remedies, if
you still have problem?, unplug the
AC power adaptor and remove all the
batteries. After all the indications in
the dtsplay disappear. plug the AC
power adaptor and insert the batteries
again. If the problem persists. please
consult your nearest Sony dealer.
Precautions
On safety
* As the laser beam used in the CD
player section is harmful to the
eyes, do not attempt to ditassemble
the casing. Refer servicing to
qualified personnel only.
* Should any solid object or liquid
fall into the player. unplug the
player, and have it checked by
qualified personnel before
operating it any further.
l Discs with non-standard shapes
(e.g., heart, square, star) cannot be
played on this player. Attempting
to do so may damage the player.
Do not use such discs.
Cleaning the cabinet
* Clean the cabinet, panel and
controls with a soft cloth shghtly
moistened with a mild detergent
solution. Do not use any type of
abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
On power sources
* For AC
operation. use
the supplied
AC power - -
adaptor: do not Polarity of
use any other type. the plug
* The player is n-o; disconnected
from the AC power source (mains)
as long as it is connected to the
wall outlet, even if the player itself
has been turned off.
- Unplug the player from the wall
outlet when it is not to be used for
an extended period of time.
* For battery operation, use four size
AA (R6) batteries.
l When the batteries are not to be
used, remove them to avoid
damage that cat, be caused by
battery leakage “I corrosion.
* The nameplate indicating operatmg
voltage, power consumption, etc. is
located at the bottom.
On placement
. Do not leave the player I” a
location near heat sources, or in a
place subject to direct sunlight,
excersive dust or mechanical
shock.
. Do not place the player on an
inclined or unstable place.
* Do not place anything withm IO
mm of the side of the cabinet. The
ventilation holes must be
unobstructed for the player to
operate properly and prolong the
life of its components.
* If the player is left it1 a car parked
in the sun. be sure to choose a
location in the car where the player
will not be subjected to the direct
rays of the sun.
* Since a strong magnet is wed for
the \peaker<, keep personal credit
cards using magnetic coding or
\pring-wound watches away from
the player to prevent possible
^
On operation
l If the player is brought directly
from a cold to a warm location, or
is placed in a very damp room,
moisture may condense on the
lenses inside the CD player section
Should this occur, the player will
not operate properly. In this case,
remove the CD and wait about an
hour for the moisture to evaporate.
If you have any questions or
problems concerning your player,
please consult your nearest Sony
dealer.
Notes on CDs
* Before playing,
clean the CD
with a cleaning
cloth. Wipe the
CD from the
center out.
* Do not use solvents such as
benrine, thinner, commercially
available cleaners or anti-static
spray intended for vinyl LPs.
l Do not expose the CD to direct
sunlight or heat sources such as hot
air ducts, nor leave it in a car
parked in direct sunlight as there
can be a considerable rise in
temperature inside the car.
l Do not stick paper or sticker on the
CD, nor scratch the surface of the
CD.
* After playing, store the CD in its
case.
If there is a scratch, dirt or
fingerprints on the CD, it may cause
tracking error.

SONY,
CFD-El0
Note on removing the CD
Do not press & OPEN button:
- while a CD is rotating after it was inserted into the CD compartment
(“- -” appears in the display).
-+ Press 4 OPEN after the CD stops rotating and the total track number appears in the
display.
- while a CD is playing.
--+ Press n STOP first, then press A OPEN.
Sony Corporation 02002 Printed in China 3-244-533-11 (1)

455714701(Tl) A
SONY@
Tape Cassette Player/Recorder/CD Player/Mini Disc
DAT/Radio/Head Phone/Speaker/MIC/Personals
LI M ITED WARRANTY ’Portab’eAudio’
Sony Electronics Inc. (“Sony”) warrants this Product (including any accessories) against defects in material or
workmanship as follows:
1. LABOR: For a period of 90 days from the date of purchase, if this Product is determined to be defective,
Sony will repair or replace the Product, at its option, at no charge, or pay the labor charges to any Sony autho-
rized service facility. After the Warranty Period, you must pay for all labor charges.
2. PARTS: In addition, Sony will supply, at no charge, new or rebuilt replacements in exchange for defective
parts for a period of one (1) year. After 90 days from the date of purchase, labor for removal and installation is
available from Sony authorized service facilities or a Sony Service Center at your expense.
To obtain warranty service, you musttake the Product, or deliver the Product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any authorized Sony service facility.
This warranty does not cover customer instruction, installation, set up adjustments or signal reception prob-
lems.
This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negli-
gence, commercial use, or modification of, or to any part of the Product, including the antenna. This warranty
does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or
attempted repair by anyone other than a facility authorized by Sony to service the Product. This warranty does
not cover Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses or batteries). This warranty
is valid only in the United States.
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the
Warranty period must be presented to obtain warranty service.
This warranty is invalid if the factory applied serial number has been altered or removed from the Product.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. SONY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIB-
ITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations
on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. In addition,
if you enter into a service contract with the Sony Partnership within 90 days of the date of sale, the limitation on
how long an implied warranty lasts does not apply to you. This warranty gives you specific legal rights, and you
may have other rights which vary from state to state.
For your convenience, Sony Electronics Inc. has established telephone numbersforfrequently asked questions:
To locate the servicer or dealer nearest you, or for service assistance or resolution of a service problem, or for
product information or operation, call:
Sony Direct Response Center
l-(800)-222-7669
or write to:
Sony Direct Response Center
12451 Gateway Blvd.
Fort Myers, FL 33913
For an accessory or part not available from your authorized dealer, call:
I-(800).488.SONY (7669)
3-232-255-01 (I) Printed in China

SONY.
IMPORTANT SAFEGUARDS
For your protection, please read these safety instructions completely before
operating the appliance, and keep this manual for future reference.
Carefully observe all warnings, precautions and instructions on the
appliance and in the operating instructions, and adhere to them.
INSTALLATION
Water and Moisture Do not use
powerline operated apphances near water
- for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, ma wet
basement, or near a summing pool, etc.
Heat -Do not place the appliance near or
over a radiator or heat register, or where it
is exposed to direct sunlight.
Ventilation -The slots and openings m the
cabmet are provided for necessary
ventilation To ensure rehable operation of
the appliance, and to protect it from
overheating, these slots and openings must
never be blocked “I covered.
-Never cover the slots and openings with
a cloth or other mater&.
- Never block the slots and openings by
placing the appliance on a bed, sofa, rug or
other smular surface.
U
IJ
-Never place the appliance in a confined
space, such as a bookcase, or built-in
cabmet, unless proper ventilation is
prowded.
Accessories -Do not place the apphance
on an unstable cart, stand, tripod, bracket,
“I table. The appliance may fall, causing
serious injury to a child or an adult, and
serious damage to the appliance. Use only
a cart, stand, tripod, bracket, or table
recommended 6y Sony.
-An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination
to overturn.
t!!D
0
Ar,,
5312541
Wall or Ceiling Mounting-If your
appliance can be mounted to a wall or
celling, mount It only as recommended by
Sony.
USE
Power Source -This appliance should be
operated only from the type of power
source indicated on the markine label If
you are not sure of the type of zectrical
power supplied to your home, consult your
dealer or local power company. For those
apphances designed to operate fro,n
battery power, “I other sources, refer to the
operating instructions.
Grounding or Polarization -This
apphance 1seqmpped with a polarxed AC
power cord plug (a plug ha\w,g one blade
wder than the other), or with a three-w,re
groundmg type plug (a plug havmg a th,rd
pin for grounding). Follow the instructions
below.
- For the appliance with a uolarized AC
power cordplug:
This plug will fit mt” the power outlet only
one way. This ISa safety feature. If you are
unable to insert the plug fully Into the
outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician
to have a suitable outlet instailed. Do not
defeat the safety purpose of the polarized
plug by forcing it in.
- For the appliance with a three-wire
grounding type AC plug:
Thx plug will only fit into a groundmg-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electr~~an to have n suitable
outlet installed. Do not defeat the safety
purpose, of the grounding plug.
Overloading -Do not overload wall
outlets, extension cords or convenience
receptacles beyond their capacity, since this
can result in fire or electric shock.
When not in use-Unplug the power cord
of the appliance from the outlet when left un-
used for a long period of time.
To disconnect the cord, pull it out by grasp-
ing the plug. Never pull the plug out by the
cord.

Power-Cord Protection -Route the power
cord so that it is not likely to be walked on
or pinched by items placed upon or against
them, paying particular attenbon to the
plugs, receptacles, and the point where the
cord exits from the atmliance.
..
-0
0 . . ..O’
@ldEb
‘I 1
l \ -c
Attachments -Do not use attachments not
recommended by Sony, as they may cause
hazards.
Lightning -For added protection for this
appliance during a lighhing storm, or
when it is left unattended and unused for
long periods of tmw, unplug it from the
wall outlet and disconnect the antenna or
cable system. This wll prevent damage to
the appliance due to hghtning and
powerline surges.
Cleaning -Unplug the appliance from the
wall outlet before cleaning or polishmg it.
Do not use liquid clean&or aerosol -
cleaners. Use a cloth liehtlv damoened with
“, .
water for cleaning the exterior of the
appliance. Clean the appliance only as
recommended by Sony.
Object and Liquid Entry Never push
objects of any kind into the appliance
through openings as they may touch
dangerous voltage points or short out parts
that could result in a fxe or electric shock.
Never spill liquid of any kind on the
appliance.
Outdoor Antenna Grounding - If an outdoor antenna or cable
system is installed, follow the precautions below. Antenna Grounding According to the National Eleurical Code
An outdoor antenna svstem should not be located in the vicinitv of
overhead power lines or other electric light or power circuits, or
where It can come in contact with such Fewer iines or circuits
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT
WITH THEM IS ALMOST INVARIABLY FATAL.
- Antenna Lead-in Wire
Antenna Discharge Unit
(NEC Se&on 810-20)
Grounding Conductors
(NEC Section 810-21)Be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code provides information with respect =d Power Serwce Groundme.
to proper grounding of the mast and supporting struchxe, groundmg
of the lead-in wire to an antenna discharge unit, size of groundmg Electrode System
(NEC Art 250 Part H)
conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode. NEC -NATIONAL ELECTRICAL CODE
Damage Requiring Service-Unplug the
apphance from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
-When the power cord or plug is
damaged or frayed.
-If liquid has been spilled or objects have
fallen mto the aooliance
.I
-If the appliance has been exposed to rain
or water.
-The apphance does not appear to operate
normally or exhibits a marked change in
performance. -This indicates a need for
service.
-If the appliance does not operate
normallv when followine the ooeratine
” L ”
mstruct;ons, adjust only those controls that
are specifwd in the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the appliance to normal operation.
-If the appliance has been subject to
excessive shock by bemg dropped, or the
cabmet has been damaged.
Servicing - Do not attempt to service the
appliance yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards Refer all serwcing
to oualihed serwce oersonnel.
Replacement parts-when replacement
parts arc required, be sore the service
technicIan has used replacement parts
specified by Sony that have the same
characteristics as the ongmal parts.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Safety Check - Upon completion of any
berv~ceor repam to the appliance, ask the
service technician to perform routme safct)
chccks(as specified by Sony) to determine
that the apphance IS1nsafe operating
condltlon.