Sony KV-28FQ75U User manual

Thank you for purchasing this Sony product.
After following this step by step guide you will
be able to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to
your TV.
Tune your TV.
View TV programmes.
1
KV-28FQ75U
KV-32FQ75U
Quick Start Guide
Checking the
Accessories Supplied Connecting the TV 3
Always observe the correct polarity when inserting batteries.
Always remember to dispose of used batteries in an environmentally friendly way.
Batteries
R
4-205-576-02
Inserting batteries into
the remote control
Connecting an aerial to your TV
Connect your existing aerial lead to the socket marked on the rear of the TV set.
Connecting an aerial and VCR to your TV
1. Connect your existing aerial lead to your VCR as shown.
2. Connect the VCR aerial lead from the RF OUT socket on the back of the VCR to the
aerial socket on the back of the TV as shown.
3. Connect the scart lead (if used) to the AV2 socket on the rear of the TV set.
4. Connect the VCR set to the mains and switch on.
5. Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables the
TV set to locate and store the video channel during the ‘Automatically Tuning the TV’
section of this Quickstart Guide.
Remote Control
If you are not
connecting your TV
to a VCR, please
connect the aerial
lead (as shown left)
and proceed to
section ‘4.Switching
on the TV’.
If you are connecting
your TV to a VCR
please refer to the
section below.
OUT
IN
AERIAL
ANTENNA
AC IN
The scart lead is
optional. If it can be
used however, this
additional
connection can
improve picture and
sound quality when
in play mode.
2

Switching on the TV
1. Connect the TV plug to a mains socket (220-240V AC), and switch on.
2. Push in the on/off switch on the front of the TV.
Automatically Tuning the TV
6
Your television stations are now stored in your television’s memory.
When you first switch on the TV, the following sequence of menu screens appear on the TV enabling you to 1) choose a language for the TV menu
screens, 2) tune channels to the TV, 3) arrange the channels.
If you have connected a VCR to your TV, you now need to find your video channel.
1. Press the PROGR+/- buttons on the TV remote control until your video picture appears on the TV screen.
Note: If you wish to move your video channel to a different programme position, refer to the ‘Re-arranging the TV channels’
section of the main instruction manual.
1. The Language/Country menu appears on the TV screen with the word ‘English’
highlighted.
2. Press the v or V buttons on the remote control to select your chosen language then press
the OK button to confirm. The country menu appears on screen with the word ‘OFF’
highlighted. Select ‘OFF’ if you do not want your channels stored in a given channel
sequence starting from programme position 1.
3. Press v or V to select the country in which you wish to operate the TV then press the OK
button to confirm your choice.
4. The ‘autotune’ menu appears on the TV screen in your selected language. Press the OK
button to confirm.
5. Ensure the aerial is connected as instructed, then press the OK button to confirm. The TV
starts to automatically search and store all available channels for you. This may take a few
minutes - please be patient and do not press any buttons.
6. Once the TV has tuned all available channels the ‘Programme Sorting’ menu appears on
the TV screen enabling you to change the order of the channels on your TV. If you do not
wish to use this option, proceed to step 7. If you wish to change the channel order, press the
v or V buttons to select the channel you want to move then press B. Press the v or V
buttons to select the new programme number position for your selected channel then press
the OK button to confirm. The selected channel now moves to its new programme position
and the other channels move accordingly. Repeat this procedure if you wish to sort the
order of other channels on your TV.
7. Press the MENU button to remove the menu from the TV screen.
8. Press the PROGR+/- or the numbered buttons to view the TV channels.
Note: If you would like to stop the autotune process at any stage, press the OK button.
Finding your video channel 7
5
Using the joystick
To select an item in a menu press
the OK button down in the middle.
To move around the menus
press the relevant arrow button.
Moving the joystick Pressing the joystick
Programme Sorting
Select Prog: Confirm:
PROG CH LABEL
Programme Sorting
Select Position: Move: OK
C03 TV 5
PROG CH LABEL
1
2
3
4
5
6
7
8
9
10
11
C03
C05
C07
C08
C09
C11
C12
C13
C14
C15
C16
TV 5
PRO 7
EU-SP
SWF
RTL
SAT
MDR
DDI
DSF
RTL 2
KAB 1
C03
C05
C07
C08
C09
C11
C12
C13
C14
C15
C16
TV 5
PRO 7
EU-SP
SWF
RTL
SAT
MDR
DDI
DSF
RTL 2
KAB 1
1
2
3
4
5
6
7
8
9
10
11
Language/Country
Language
Country
Select Country: Confirm: OK
Greece
Great Britain
Germany
France
Finland
Denmark
Czech Rep.
Language/Country
Language
Country
Select Language: Confirm: OK
Italiano
Français
Español
English
Deutsch
Dansk
Čeština
::
::
4
123
456
789
0