Sony kv-da29 Trinitron User manual

Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Tr initron Color TV
Operating Instructions
•Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-DA29
© 2004 Sony Corporation
2-515-454-11 (1)
M90
CT
使用說明書
•使用本電視機之前請先詳細閱讀此手冊﹐並妥善保存以備日後用作參考。
CS
使用说明书
•使用本电视机之前请先详细阅读此手册，并妥善保存以备日后用作参考。
GB

Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
2
Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 220 – 240 V AC.
•Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
•To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may be
subject to excessive dust, heat, moisture or
vibrations.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto it.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to
clean the TV. Do not attach anything (e.g., adhesive
tape, cellophane tape, glue) on the painted cabinet of
the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.

Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
3
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.

4
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
xSecuring the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
(1) Attach each end of a cord or chain to
the provided holders at the rear of
your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
or
or

5
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Menu Adjustment
Introducing the menu system .......... 17
Changing the “Picture” setting ........ 19
Changing the “Sound” setting ......... 21
Changing the “Wide Screen” setting ... 23
Changing the “Channel Setup”
setting .................................................. 24
Changing the “Setup” setting .......... 26
Additional Information
Connecting optional components ... 28
Troubleshooting ................................. 31
Specifications ...................... Back cover
GB
Table of Contents
Installation
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Overview of Controls
TV front and rear panels ..................... 9
Using the remote control and
basic functions .................................... 10
Advanced Operations
Selecting the picture and
sound modes ...................................... 12
Viewing higher quality pictures
with DRC-MF ..................................... 13
Enjoying the WEGA Theatre Mode
with center speaker ........................... 14
Enjoying stereo or bilingual
programs ............................................. 15
Operating optional components ...... 16

6Installation
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Installation
xGetting Started
b
b
1
Step 1
Insert the batteries (supplied) into the remote.
Note
•Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
Plug in the power cord, then press !on the TV to
turn it on.
Note
• The 1(standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
•You can also connect your TV to other optional components
(see page 28).

7
Installation
Installation
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
x Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language, preset the TV channels automatically, change the
order of TV channels that appear on the screen and adjust the picture position using
the buttons on the TV front panel.
Tip
•For menu operations, the MENU, t and 2+/– buttons on the TV front panel have the same
function with the MENU, and V/v buttons on the remote control.
1Press 2+/– to select the desired menu
language, then press t.
The selected menu language appears.
2Press 2+/– to select “Yes”, then press t
to preset the channels automatically.
The screen will indicate automatic
presetting in progress.
After all available channels have been tuned
and stored, the “Program Sorting” menu
appears automatically on the screen.
To skip automatic channel presetting, select
“No”, then press t.
If the message “No channel found. Please
connect cable/antenna” appears, check your
TV connections, then press t.
3The “Program Sorting” menu enables you
to change the order in which the channels
appear on the screen.
a) If you wish to keep the channels in the
tuned order, press MENU.
b) If you wish to store the channels in a
different order:
1) Press 2 +/– to select the program
number with the channel you wish to
rearrange, then press t.
Program:
TV System: Auto
01
VHF Low
Program Sorting
Program:
01
02
03
04
Select channel
continue

8Installation
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
The selected channel will appear on
the screen.
2) Press 2+/– to select the new
program number position for your
selected channel, then press t.
3) Repeat steps b) 1) and 2) if you wish
to change the order of the other
channels.
c) Press MENU to go to the next menu.
4Press 2+/– to adjust the bars on the top
and bottom of the menu if they are
slanted, then press t.
“Picture V-Position” menu appears.
5If the upper and lower bars are not
equally positioned to the top and
bottom of the screen, press 2+/– to
adjust them, then press t.
If no adjustment is necessary, then press t.
6Press 2+/– to select “No”, then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
“Yes”, then press t.
Tips
•You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
•You can also set up your TV by using the menu system (see page 17).
•You can also preset the channels automatically by pressing the MENU (AUTO PROG) button
on the TV front panel for about five seconds.
Notes
•Before adjusting “Picture Rotation” and “Picture V-Position”, keep external speakers or other
electrical equipment away from the TV. The magnetic disturbance from these equipments or
the direction of the earth’s magnetic field may affect the TV.
•You cannot adjust “Picture Rotation” and “Picture V-Position” when high-definition (1080i,
720p) signals are input.
01
Program Sorting
Program:
01
02
03
04
Select new position
continued
Picture V-Position

9
Overview of Controls
Overview of Controls
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Overview of Controls
1
1
2
23
C R
P R /
C
B
Y
Y
RL P
B /
C
R
P R /
C
B
P B /
RL
RG B
HD
VD
SYNC
4
L(MONO) R
PROG
MENU
(AUTO PROG)
SOUND
MODE
AUTO PROG:Press [MENU] for 5sec
qa qs
qd qg
qf qh qj
32
094
5
876
4
L(MONO) R
PROG
MENU
(AUTOPROG)
SOUND
MODE
AUTOPROG:Press[MENU]for5sec
C
1
120W MAX 8
TV front panel
TV rear panel
xTV front and rear panels
Button/Terminal Function Page
1!Turn off or turn on the TV. 6
21Standby indicator. 6
2Wake Up indicator. 10
3Remote control sensor. –
4PROG +/– Select program number. –
52+/– Adjust volume. –
6tSelect TV or video input. 28
Menu operations
52+/– Select and adjust items. –
6tConfirm selected items. –
7MENU Display or cancel the menu. –
7(AUTO PROG) Preset channels automatically. 8
8SOUND MODE Select sound mode options. 12
5-Band Graphic Equalizer display will appear.
9t4Video input terminal 4. 28
0iHeadphone jack. –
qa Center speaker input terminal. 30
qs t1, t2, t3Video input terminal 1, 2, 3. 28
qd TMonitor output terminal. 28
qf 2Component video input terminal 2. 29
qg 1 Component video input terminal 1. 29
qh SYNC HD/VD HD/VD input terminal. 29
qj 8Antenna input terminal. 28

10 Overview of Controls
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
xUsing the remote control and basic
functions
123
46
789
0
5
HD/DVD
VIDEO
DRC-MF
PROG
INDEX
CENTER
SP
WEGA
THEATRE
A/B
MENU
OPTION RESET
TV
PROG
1
3
4
2
0
9
8
6
7
5
qg
qh
qj
qk
ws
w;
wg
wf
wd
wa
qf
qd
qs
qa
ql
Button Description Page
1?/1Turn off temporarily or –
turn on the TV.
2aDisplay the TV program. –
3tSelect video input. 28
4 WEGA THEATRE Select WEGA Theatre Mode. 14
5CENTER SP Select TV’s center speaker 14
mode.
Stereo/bilingual operations
6A/B Select stereo/bilingual mode. 15
Menu operations
7MENU Display or cancel the menu. –
8V, v,B,b Select and adjust items. –
9Confirm selected items. –
0 Change the picture size: –
“4:3”, “16:9”(16:9 wide-mode).
qa Jump to last program number
that has been watched for at –
least five seconds.
qs PROG +/– Select program number. –
Timer operations
qd Set TV to turn off automatically
(Sleep Timer) according to the desired period –
of time (max. of one hour and
30 min.).
qf Set TV to turn on automatically
(Wake Up according to the desired period
Timer) of time (max. of 12 hours). –
The indicator on TV lights
up amber once you set the
wake up timer.
If no buttons or controls are
pressed for more than one
hour after the TV is turned on
using the wake up timer, the
TV automatically goes into
standby mode.
qg Mute the sound. –
qh Display on-screen information. –
qj HD/DVD Select component video input. 29

11
Overview of Controls
Overview of Controls
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Button Description Page
qk DRC-MF Select DRC-MF mode. 13
ql PROG INDEX Not function for your TV. –
w; Select sound mode options. 12
5-Band Graphic Equalizer display will appear.
wa Select picture mode options. 12
ws Select surround mode options:
“TruSurround” (surround sound that spreads out
to the rear of a room), “WOW” (full, –
deep bass sound), “Simulated”(stereo-like
monaural sound), “Off”.
wd 0 – 9, -Input numbers. –
wf 2+/– Adjust volume. –
wg RESET Set TV to factory setting. 31
TWIN picture operations
, , , Not function for your TV. –
TWIN PROG +/
TWIN PROG –
Teletext operations
, , , ,Not function for your TV. –
, , , ,
z(red, green,
yellow, blue)
Optional components operations
VIDEO ?/1, OPTION, For details, see “Operating optional components”. 16
N,X,x, ., >,
%,2 +/–
WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW
and TruSurround technologies are incorporated under license from SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866.
“BBE” and BBE symbol are trademarks of BBE Sound, Inc.

12 Advanced Operations
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Advanced Operations
Selecting the sound mode
Press (or SOUND MODE on the front panel) to select the desired sound mode.
5-Band Graphic Equalizer display will appear.
Select To listen to
“Dynamic” dynamic and clear sound that emphasizes both the low
and high tones.
“Drama” sound that emphasizes voice and high tones.
“Soft” soft, natural and relaxing sounds.
“Personal” the last adjusted sound setting from the
“Sound Adjustment” option in the menu (see page 22).
xSelecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Personal” option.
Selecting the picture mode
Press to select the desired picture mode.
Select To view
“Dynamic” high contrast pictures.
“Standard” normal pictures.
“Hi-Fine” higher density pictures with mild
contrast.
“Personal” the last adjusted picture setting
from the “Picture Adjustment”
option in the menu (see page 20).
Dynamic
100 300 1k 3k 8k
100 300 1k 3k 8k
Drama
100 300 1k 3k 8k
Soft
100 300 1k 3k 8k
Personal
123
46
789
0
5
HD/DVD
VIDEO
DRC-MF
PROG
INDEX
CENTER
SP
WEGA
THEATRE
A/B
MENU

13
Advanced Operations
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
xViewing higher quality pictures
with DRC-MF
The Digital Reality Creation-Multi Function (DRC-MF) feature allows you to
enjoy higher quality pictures on your TV. You can use the DRC-MF button to
select “DRC1250”, “DRC100” or “Progressive”.
Select To
“DRC1250” view super real (higher density)
pictures.
“DRC100” reduce flicker on the screen.
“Progressive” reduce jitter of any small areas or
scanning lines (e.g., letters or the
edge of objects) on the screen.
Note
•The DRC-MF mode is not selectable when “Game Mode” mode is turned “On”. The mode is
not available for HD (high-definition) and progressive input signals.
The DRC-MF logo ( ) and “DRC-MF” are trademarks of Sony
Corporation.
HD/DVD
VIDEO
DRC-MF
PROG
INDEX
CENTER
SP
WEGA
THEATRE
A/B
MENU
DRC-MF

14 Advanced Operations
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
x Enjoying the WEGA Theatre Mode
with center speaker
The WEGA Theatre Mode enables you to enjoy the best picture, sound and
surround effect of a cinema from a DVD source. You can use your TV speaker as
the center speaker of your audio system for optimum vocal enhancement and
control its sound volume from the remote of the TV.
Setting up WEGA Theatre Mode
1. Connect the center speaker terminals of the amplifier to the center speaker
input terminal on the TV (see page 30).
2. Select the proper video input from “WEGA Theatre Setup” menu and turn on
(main power) the connected equipment (see page 26).
3. Set up the remote to work with the connected equipment (see page 16).
To Press
switch to WEGA WEGA THEATRE.
Theatre Mode Be sure to aim the remote control at
the TV set and connected equipment
for about one second after the
button is pressed.
The connected equipment turns on
automatically from standby mode
and will start playing.
The “Picture Mode” and “Sound
Mode” will switch automatically to
“Personal” and you can adjust the
setting to your personal preference
(see pages 20 and 22).
switch to center CENTER SP repeatedly until
speaker mode “CENTER IN Speaker” appears.
To return to normal speaker
mode, press the button repeatedly
until “MAIN Speaker”
appears.
adjust center 2 +/–.
speaker volume
Notes
• Be sure to place your TV and connected equipment adjacent to each other so that you can
control both the TV and the connected equipment by using the TV’s remote control at the
same time (see page 16).
•The WEGA Theatre and center speaker modes are automatically cancelled when you change
the program number, video input or turn the TV off and on again.
• When the TV is in the center speaker mode, you cannot change the surround sound and the
“Intelligent Volume” mode.
•Some equipment might not respond properly when WEGA THEATRE button is pressed. In
this case, use the equipment’s own remote control.
123
46
789
0
5
HD/DVD
VIDEO
DRC-MF
PROG
INDEX
CENTER
SP
WEGA
THEATRE
A/B
MENU
OPTION RESET
TV
PROG
CENTER SP
WEGA THEATRE
2 +/–

15
Advanced Operations
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
x Enjoying stereo or bilingual programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
When receiving a NICAM program
Broadcasting On-screen display (Selected sound)
NICAM
stereo
NICAM
bilingual
NICAM
monaural
When receiving an A2 program
Broadcasting On-screen display (Selected sound)
A2
stereo
A2
bilingual
A/B
Notes
• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound
becomes monaural but the noise is reduced.
• Before receiving a NICAM program in China, please check the NICAM broadcast condition in
your area. When receiving a NICAM stereo program, the receiving conditions might vary
depending on area. In addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
NICAM
(Stereo sound)
Mono
(Regular sound)
t
t
NICAM Main
(Main sound)
NICAM Sub
(Sub sound)
Mono
(Regular sound)
tt
t
NICAM Main
(Main sound)
Mono
(Regular sound)
t
t
Mono
(Regular sound)
Stereo
(Stereo sound)
t
t
Main
(Main sound)
Sub
(Sub sound)
t
t
123
46
789
0
5
HD/DVD
VIDEO
DRC-MF
PROG
INDEX
CENTER
SP
WEGA
THEATRE
A/B
MENU
OPTION RESET
TV
PROG

16 Advanced Operations
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
xOperating optional components
You can use the supplied remote to operate Sony audio/video equipment.
Setting up the remote to work with other connected equipment
While keeping VIDEO ?/1 For example, to operate a
pressed, press the corresponding Sony 8 mm VCR:
number button for the desired
equipment (see the chart
below).
To control Hold down VIDEO ?/1 and press
Audio System 1, 1x, 2 or 3 0, 1, 2, or 3
DVD 1, 2 or 3 4, 5 or 6
VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9
+
VIDEO
8
To Press
turn on/off VIDEO ?/1.
play Nwhile keeping OPTION pressed.
stop xwhile keeping OPTION pressed.
fast forward/ step forward or rewind/ >or .while keeping OPTION
step backward pressed.
pause Xwhile keeping OPTION pressed.
Press again to resume normal playback.
mute the sound while keeping OPTION pressed.
(Audio System 1, 1x, 2 or 3 only)
adjust volume 2 +/– while keeping OPTION pressed.
(Audio System 1, 1x, 2 or 3 only)
Operating audio/video equipment
Press VIDEO ?/1 or while keeping OPTION pressed, press N, x, ., >,X,
or 2 +/– (see the chart below).
Notes
•If the equipment does not have a certain function, the corresponding button on the remote will
not operate.
•Some equipment might not respond properly to buttons on TV’s remote. In this case, use the
equipment’s own remote control.

17
Menu Adjustment
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Menu Adjustment
xIntroducing the menu system
The MENU button lets you open a menu and change the settings of your TV.
The following is an overview of the menu system.
Tip
•If you want to exit from Menu level 2 to Menu level 1, press Vor vuntil the return icon ( ) is
highlighted, then press .
Note
•When a feature is dimmed in the menu, it is not selectable.
Level 1
“Picture”
“Sound”
Level 2/Level 3
“DRC-MF”
“Picture Mode”
“Picture Adjustment”
“3D Intelligent
Picture”
“Sound Mode”
“Sound Adjustment”
“Balance”
“Intelligent Volume”
“Surround”
Level 3/Level 4/Function
Select the “DRC-MF” mode:
“DRC1250” t“DRC100” t“Progressive”
Select the picture mode:
“Dynamic” t“Standard” t“Hi-Fine”
t“Personal”
Adjust the “Personal” option:
“Picture” t“Brightness” t“Color”
t“Hue” t“Sharpness”t“Color Temperature”
t“Reset”
Optimize picture quality:
“On” t“Off”
Select the sound mode:
“Dynamic” t“Drama” t“Soft” t“Personal”
Adjust sound frequency settings of “Personal”
option:
“Adjust” t“Reset”
Select to emphasize the left and right speakers.
Adjust volume automatically:
“On” t“Off”
Select the surround mode:
“TruSurround” t “WOW” t“Simulated”
t“Off”
Page
19
21
Return icon
Channel Setup icon
Wide Screen icon
Name of the current
menu
Picture icon
Menu level 3
Menu level 2
User Guidance
Menu level 1
Confirm End
Setup
WEGA Theatre Set
Game Mode :
Picture Position
Language:
Video Label
Select
Sound icon
Setup icon
continue

18 Menu Adjustment
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Level 1
“Wide Screen”
“Channel Setup”
“Setup”
Level 2/Level 3
“Wide Mode”
“Auto Wide”
“Auto Program”
“Manual Program”
“Program Label”
“Program Block”
“Program Sorting”
“Language”
“Picture Position”
“WEGA Theatre
Setup”
“Direct Input”
“Speaker”
“Game Mode”
“Video Label”
“Color System”
“Eco Mode”
Level 3/Level 4/Function
Change the picture size:
“16:9” t “4:3”
Optimize wide screen picture:
“On” t “Off”
Preset channels automatically.
Preset channels manually.
Label the program number.
Block unwanted programs.
Change the order in which the channels appear
on the screen.
Change the menu language:
“English” t “” (Chinese) t“ ” (Arabic)
t“ ”(Thai)
Adjust the picture position.
Select the WEGA Theatre Mode.
Select the input for connected equipment.
Select the speaker mode:
“MAIN” t “CENTER IN”
Adjust the picture settings for video games:
“On” t “Off”
Label the connected equipment.
Select the color system:
“Auto” t “PAL” t “SECAM” t “NTSC3.58”
t “NTSC4.43”
Reduce power consumption of your TV:
“On” t “Off”
Page
23
24
26
continued

19
Menu Adjustment
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
xChanging the “Picture” setting
The “Picture” menu allows you to adjust the picture settings.
1Press MENU.
2Make sure the “Picture” icon ( ) is
selected, then press .
3Press Vor vto select the desired item (e.g., “Picture Mode”), then press .
Select To
“DRC-MF” choose either “DRC1250”, “DRC100” or “Progressive”
(see page 13).
“Picture Mode” choose either “Dynamic”, “Standard”, “Hi-Fine” or “Personal”*
(see page 12).
“3D Intelligent Picture” optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press Vor vto select “On”, then press .
To cancel, select “Off”, then press .
*You can adjust the setting to your personal preference in the “Picture Adjustment”
option only when the “Personal” mode is selected (see page 20).
Notes
•“3D Intelligent Picture” is not available for HD and progressive input signals.
•For NTSC 3.58 color system, “3D Comb Filter : On” or “3D–NR : On” display will appear
when “3D Intelligent Picture” changes from one mode to the other. For PAL color system,
Digital Comb Filter and 3D-NR are also available.
Select End
Picture
Picture Mode:
DRC-MF: DRC1250
Dynamic
Confirm
Picture Adjustment
On
3D Intelligent Picture:
continue

20 Menu Adjustment
Sony KV-DA29M90 Group E6 (GB, CT, CS)_2-515-454-11 (1)
Adjusting the “Picture Adjustment” items under
“Personal” mode
1Press Vor vto select either “Picture” (contrast), “Brightness”, “Color”,
“Hue” (color tones),“Sharpness” or “Color Temperature” (choose either
“Cool”, “Neutral” or “Warm”), then press .
Selecting “Reset” will set your TV to the factory setting.
2Press V,v,B or bto adjust the setting of your selected item, then press .
3Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “Personal”.
Notes
•“Hue” can be adjusted for the NTSC color system only.
•Reducing “Sharpness” can also reduce picture noise.
continued