
LANC Editing
The DSR-30 is equipped with LANC
connectors. By connecting the DSR-30 with
another LANC based recorder or a camcorder
such as the DSR-200A or DSR-PD1, TC-based
accurate editing is possible. Even without an
editing controller, the DSR-30 is capable of
assemble editing with a program memory of
up to ten events. Insertion of video and/or
audio signal is also possible without an editing
controller. With the optional FXE-120 Video
Editing System connected, the DSR-30 can
serve as a feeder machine for a professional
A/B roll editing system.
i.LINK (IEEE1394 based)
The DSR-30 has an i.LINK (DV In/Out)
interface based on the IEEE1394 standard.
When connected to other i.LINK interface
equipped machine such as the DSR-20,
DSR-200A or DSR-PD1, the DSR-30 provides
a video/audio and data dubbing capability,
virtually without any deterioration of quality.
Auto Repeat Function
The DSR-30 is equipped with an Auto Repeat
Function. In this mode, the DSR-30
automatically rewinds the tape just after the
tape reaches the end of the tape, end of the
program, or the first index point, then
automatically starts playing back that
segment again.
Dual Cassette Mechanism
The DSR-30 incorporates a dual cassette
mechanism which accepts both Mini size and
Standard size DVCAM cassette tapes without
an adaptor.
Built-in Control Tray
The DSR-30 has a built-in control tray which
can be easily extended from the main unit.
The Jog/Shuttle dial allows picture search at
±1/5 to 15 times normal speed in both forward
and reverse, accompanied by audio playback
at the same speed.
Search for the In-points
The DSR-30 can search for Index Points. An
Index Point is recorded on the tape as a
marked “in-point” every time a recording is
started. The DSR-30 can also search for the
photo data recorded on a cassette by the
DSR-200 DVCAM Camcorder, or the point
where the recorded date has been changed
to a new one.
Clear Frame Picture
With Frame interpolation technology, the DSR-
30 detects motion between the two fields
within a frame and compensates for picture
blurs. Thus, the DSR-30 can provide a clear
frame picture even from moving images.
Wireless Remote Controller
The wireless remote controller RMT-DS30
supplied with the DSR-30 can be used for
basic function control. If multiple DSR-30’s
are connected via the “Control S” Interface,
they can be controlled by simply sending one
command to the master deck.
Headphone/Microphone Input
The DSR-30 has stereo mini jacks for a
headphone output and a microphone input on
the front panel for operational convenience.
Editing Control
Editing Control
Various Recording /
Playback Functions
Various Recording /
Playback Functions
Other Useful Features
Other Useful Features
One Program Playback Function
In the One Program Playback mode, the
DSR-30 automatically rewinds the tape to the
beginning after playing back the program,
then enters into a STANDBY mode. In
museums, for example, the video playback
can be started by the simple touch of a
button.
External Timer Recording
The DSR-30 is capable of external timer
recording when an external timer is
connected. When the EXT Timer REC switch
is set to ON, the DSR-30 automatically starts
recording as soon as the AC power is turned
on.
Function Lock
The DSR-30 has a Function Lock capability to
inhibit any operation of the keys on the front
panel or the control tray, thus avoiding
misoperation.
Rear panel