Sony PlayStation 3 (Uncharted: Drake's Fortune Limited Edition... User manual

PlayStation®Move sharp shooter
Instruction Manual
CECHYA-ZRA1E 7017291
GB

START button SELECT button
T button
trigger
Move button
trigger
Barrel
guide
Strap opening Safety lock
Release
button
Magazine grip
RL reload button
Navigation
controller holder
Retractable stock
Firing mode selector
Top cover Release latch
button
button
SELECT
button
Pump-
action
grip
Navigation controller
holder cover
Side View
Front View
Part names

Figures




 
or

Precautions
Before using this product, carefully read this manual and retain it for future reference.
Read also the instructions for the PlayStation®3 system, the PlayStation®Move motion
controller and the PlayStation®Move navigation controller. Parents or guardians
should read these manuals for children.
Caution
ˎThe sharp shooter attachment can only be used with the PlayStation®Move motion
controller and PlayStation®Move navigation controller (sold separately) inserted. It
cannot be used separately. Do not insert anything other than the motion controller
and the navigation controller.
Use and handling
ˎDo not expose the product to high temperatures, high humidity or direct sunlight.
ˎDo not allow the product to come into contact with liquids.
ˎDo not place any objects on top of the product. Do not stand on the product.
ˎDo not throw or drop the product, or otherwise expose it to strong physical impact.
ˎFollow the instructions below to help prevent the product exterior from
deteriorating or becoming discoloured.
ˋWipe with a soft, dry cloth.
ˋDo not place any rubber or vinyl materials on the product exterior for an
extended period of time.
ˋDo not use solvents or other chemicals. Do not wipe with a chemically-treated
cleaning cloth.
ˎNever disassemble or modify the product.
Inserting the motion controller and navigation controller
Notice: Do not attempt to insert either controller while a USB cable is attached.
1Slide the RELEASE latch on both sides simultaneously to remove the top
cover of the barrel guide (figure ).
2Insert the motion controller into the barrel guide (figure ).
ˎThread the motion controller’s wrist strap through the slot in the barrel guide.
ˎPlace the sphere over the edge of the barrel guide and align the motion controller’s
extension connector with the connector in the barrel guide.
ˎFirmly seat the motion controller into the barrel guide; be sure that the motion
controller’s extension connector meets securely with the connector in the
barrel guide.

3Attach the top cover.
4Insert the navigation controller into the navigation controller holder
(figure ).
ˎOpen the navigation controller holder cover.
ˎPosition the navigation controller so that the two small holes at the bottom of the
casing line up with the holder’s pegs. Holding the navigation controller
diagonally, insert the top of it into the holder and then push the bottom down so
it is firmly seated onto the holder’s pegs.
5Close the navigation controller holder cover.
Using the sharp shooter
1To adjust the length of the stock, press the release button and pull the stock
out or push it in to your desired length (figure ). When you pull the stock
out, listen for the clicks that indicate the secure stop locations.
2Use either hand to operate the navigation controller and the free hand
to operate the T button trigger (figure ). Wear the motion controller’s
wrist strap around the hand which you are using to operate the navigation
controller.
(Optional) To lock the Move button trigger so it cannot be pressed, slide the
Safety Lock located on either side of the sharp shooter to the down position.
(The button on the other side should automatically slide to the down
position) To unlock the Move button trigger, return the Safety Lock to the up
position.
3For information about in-game button control, please consult your game
manual.
Removing the motion and navigation controllers
1Remove the navigation controller from the navigation controller holder
(figure ).
ˎOpen the navigation controller holder cover.
ˎPush your finger through the hole in the underside of the holder to release the
navigation controller.
ˎClose the navigation controller holder cover.
2Remove the motion controller from the barrel guide.
ˎSlide the RELEASE latch on both sides simultaneously to remove the top cover of
the barrel guide.

ˎLifting the sphere end of the motion controller first, pull to remove the motion
controller.
ˎUnthread the motion controller’s wrist strap from the slot in the barrel guide.
ˎReplace the top cover.
Specifications
Power Consumption DC 3.2 V, 5 mA
External dimensions
(with retractable stock closed)
479.18mm x 211.57mm x 56.91mm
(length x height x depth)
Mass Approx. 630g (22.2 oz)
Design and specifications are subject to change without notice.
GUARANTEE
This product is covered for 12 months from date of purchase by the manufacturer’s warranty
set out in the PS3™ system manual.
Please refer to the PS3™ system manual for full details.
The manufacturer of this product is Weifang Goertek Electronics Co.,Ltd., Dongfang North
Road, Hi-Tech Industry Development District, Weifang, Shandong, China.
Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough
Street, London, W1F 7LP, United Kingdom.
“ ” and “PlayStation” are registered trademarks of Sony Computer Entertainment Inc.
“ ” is a trademark of Sony Computer Entertainment Inc.
“SONY” and “ ” are registered trademarks of Sony Corporation.
© 2010 Sony Computer Entertainment Inc. All rights reserved.
Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the
relevant electrical product or battery should not be disposed of as general household waste in Europe. To
ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any
applicable local laws or requirements for disposal of electrical equipment/batteries. In so doing, you will help
to conserve natural resources and improve standards of environmental protection in treatment and disposal of
electrical waste.