Sorenson ntouch VP2 Reference guide

QuickHelp Sorenson ntouch VP2
Hardware Features
Use the bookmarks in the left-hand column to jump to the QuickHelp answers to these questions:
How do I use the HDMI Pass-Through feature?
What do the two icons on the front side of the camera mean?
Why does the LED on the front of the main unit change colors?
What do the five buttons on top of the main unit do?
How do I use the HDMI Pass-Through feature?
The HDMI Pass-Through feature lets you connect external devices, such as a DVD or
Blu-Ray player, HD Cable TV set-top box, or HD Satellite TV set-top box to the
HDMI-In port on the back of the ntouch VP2 Main Unit. You will need an HDMI Type
A Male-to-Type D (Micro) Male connector plug to make this connection.
The external device connected to ntouch VP2 must be able to generate a constant output
signal of 720p/60, 1080p/60 or 1080p/24 (Blu-Ray movie) “progressive” resolution for
the HDMI Pass-Through feature to work properly. The “interlaced” 1080i resolution is
not supported by ntouch VP2.
After you have connected the external device to the ntouch VP2’s HDMI In port, you can
switch back and forth between the videophone display and the external device display.
Step 1. Connect a Male Type A-to-Mail Type D HDMI cable to ntouch VP2’s HDMI In port.
The back panel of the ntouch VP2 Main Unit is shown below.
Step 2. Look for the Switch to TV button on ntouch VP2’s Home screen as shown below.
HDMI In port (Micro Type-D)
Switch to TV button

If you do not see the Switch to TV button on the Home screen as shown above, either
there is no signal coming from the external device, or the signal that is being sent is not
supported by ntouch VP2. Check to make sure your external device is set to output a
constant 1080p or 720p resolution.
Be aware that HD Satellite TV set-top boxes usually default to 1080i (the “interlaced”
resolution), so they must be manually set to 720p in order to work with ntouch VP2.
Step 3. ntouch VP2 will display the dialog shown below when an incoming call is received.
The dialog is displayed over the video image from the external device.
You can also switch back to the ntouch VP2 display by turning off the external device.
Incoming call dialog
Image from external
device

What do the two icons on the front side of the camera mean?
Step 1. Look at your ntouch VP2’s remote camera unit as shown below.
There are two icons printed on the front surface and two LEDs next to the icons. The
LED next to the envelope icon will be turned on if you have new SignMail video
messages. The LED next to the telephone handset icon will be turned on if the
videophone has received missed calls (i.e., calls you did not answer).
Missed Call LEDNew SignMail LED

Why does the LED on the front of the main unit change colors?
Step 1. Look at the front-side surface of your ntouch VP2’s main unit as shown below.
The Status LED on the right-front side of the ntouch VP2 main unit will change colors
indicate the videophone’s status, both during and after the booting (start-up) process.
The normal LED sequence (i.e., no problems encountered during booting) is:
Light Green—Amber—Green—Amber—Green
If the LED remains in the Amber color after the Home screen appears, the videophone is
not connected to Sorenson's servers. Check your network connection or contact Sorenson
Technical Support for assistance.
If the LED turns Red briefly during booting, the remote camera unit was not detected. If
the LED turns blue briefly during booting, the HDMI-out connection to the HDTV
display was not detected.
Status LEDFront side of main unit

What do the five buttons on top of the main unit do?
Step 1. Look at the top-side surface of your ntouch VP2’s main unit as shown below.
The Handset and four Arrow buttons on the top side of the ntouch VP2 main unit can
be used to place a call without using the remote control.
Step 2. To place a call, press the Handset button to open the screen shown below.
The Place a call dialog gives you the choice to place a call from your Favorites list, Call
History list, the Phonebook’s Contacts list, or to directly call Sorenson Support.
Step 3. If you select the Support button, you will open the screen shown below.
You now have the choice to directly call Sorenson’s Customer Service or Technical
Support departments.
Handset and Arrow buttonsTop side of main unit
Place a call dialog
Support call dialog