Sound Sation MS189 User manual

MS189 Desktop Gooseneck Microphone
SOUNDSATION is a trademark of FRENEXPORT SPA – Via Enzo Ferrari , 10 – 62017 Porto Recanati – Italy www.soundsationmusic.com
-30
-40
-50
-60
-70
(dBV/Pa)
20 2K 20K 50 100 200 500 1K 5K
(Hz)
Frequency Response Graph
1. SOUNDSATION MS189 is a desktop gooseneck
microphone is a professional microphone designed
for applications such as large-scale conferences,
public addresses, outdoor speeches etc.
It adopts a back electret condenser cartridge, which
delivers bright and clear sound. This uni-directional
microphone featuring high sensitivity and low
self-noise can operate by battery power or via
phantom power received from an external device like
a mixer . Its flexible gooseneck can be adjusted
smoothly and quietly to fit any needs and situations
and a red LED conveniently mark the on-off state.
TECHNICAL SPECIFICATIONS
Transducer: Back Electrect Condenser
Polar Pattern: Uni-directional
Frequency Response: 100Hz-16kHz
Sensitivity: -37dB±3dB(0dB=1V/Pa at 1kHz)
Output Impedance: 100Ω±30%(at 1kHz)
Load impedance : ≥1000 Ω
Operating Voltage: Phantom Power 9-52V or 3V Battery
Battery Type: AAA,1.5V
USAGE:
1. Install two 1.5V AA batteries at the base of the gooseneck
microphones. ( be aware of their polarities ). If using the
phantom power, please connect the parts according to the
following drawing.
2. Connect the gooseneck microphone to its base.
3. Plug the XLR connector of the attached cable and connect the
microphone to a mixer.
4. Turn the volume control down to zero then turn on the power
switch of both the mixer and the microphone and adjust the
volume.
5. The best distance from the microphone cartridge while
speaking should be kept at 5 to 30 cm.
The box contains:
Gooseneck microphone
Powered base ( by N 2 AA1,5 alkaline batteries or 48V phantom power )
Windscreen
XLR F to XLR M 6 meter cable
Two AA size batteries
WARNING
1. Do not cover the microphone cartridge by hands or install the unit close to speakers as it may cause howling noise. If this happens, simply turn down the volume,
take the microphone further away from the speakers, and let the cartridge not face the speakers
2. Only use attachments/accessories specified by the manufacturer.
3. Unplug this apparatus during lightning storms or when unused for long periods of time.
4. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
XLRF
PHANTOM POWER
SUPPLIER
TABLE GOODSENECK
MICROPHONE
AMPLIFIER,
MIXER,
POWER AMPLIFIER

MADE IN CHINA