Sennheiser HANDMIC DIGITAL User manual

Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Printed in Germany, Publ. 06/17, 571329/A01
HANDMIC DIGITAL
iPad
iPod iPhone
Quick Guide
Sound inlet
basket
Microphone table stand
Microphone clamp
LED
Apogee PureDigital Enhanced
A/D conversion circuitry inside
Micro USB to
Lightning/USB
connector
In the box Overview
Important for iOS Devices
1 HANDMIC DIGITAL microphone
1 Cable 2m, Micro USB/Lightning
1 Cable 2m, Micro USB/USB
1 Microphone clamp
1 Microphone table stand
1 Pouch
1 Quick Guide
1Safety Guide
Requirements
iOS version: 9 or later
Mac OS version: 10.7.5 or later
PC Version: Windows Vista or later
Connection / Power: Lightning, USB 1.0 or later
Setup
1Connecting
If you are using a headset,
(1) first connect the headset,
(2) then connect the HANDMIC DIGITAL to the
recording device.
By default, you will not hear the HANDMIC DIGITAL until input
monitoring is enabled in an app.
Connect the Micro USB connector to the HANDMIC
DIGITAL.
Connect the HANDMIC DIGITAL to your iOS device,
Mac or Windows PC.
Wrong chosen audio source can reduce the
recording quality.
The last connected microphone will be used as the
audio source. If you are using your headset for input
monitoring, you might record unintentionally via the
headset microphone. To avoid this:
Connect your headphone or headset to your iOS
device first before connecting the HANDMIC DIGITAL
to the Lightning port.
Ensure that the apps detect the HANDMIC DIGITAL as
the last connected microphone.
Lightning port
USB port
571329_0217_A01_QG_HandMicdigital.pdf 1 09.06.2017 08:16:33
All manuals and user guides at all-guides.com
all-guides.com

Make sure that the recording app supports external
microphones.
Apogee‘s Meta Recorder App* allows you to record
audio and control your HANDMIC DIGITAL.
Apogee MetaRecorder
5-10 cm
>10 cm
Important
HANDMIC DIGITAL´s recording by using any Core Audio,
video app or recording software.
HANDMIC DIGITAL‘s input gain can be controlled by
either Apogee‘s Maestro App or any recording app that
supports Core Audio input control.
For advanced recording adjustments (e.g. rumble
reducer, hiss reducer, overload eliminator and available
updates) but no recording itself use Apogee‘s Maestro
App.*
* Both apps install from Apple‘s App Store or
www.apogeedigital.com.
Installing the app
Technical data
LED display
Positioning the microphone
Cleaning and maintaining
Apogee Maestro
It is possible to record with the HANDMIC DIGITAL
using any Core Audio compatible app, video app or
recording software.
LED Color Meaning
Red Streaming audio: HANDMIC DIGITAL is
connected to an iOS device and a recording
app is receiving the audio stream
regardless of whether recording has been
started or not.
Off Low power mode: HANDMIC DIGITAL is
connected to an iOS device but no
recording app is active, no audio
streaming.
Resulting sound
High proximity effect (large bass
boost)
Powerful, direct sound
Commentary
Very little crosstalk from other
sound sources
Resulting sound
Less proximity effect (less bass
boost)
Some room ambience, natural,
balanced sound
Commentary
More crosstalk from other sound
sources
Resulting sound
Very little proximity effect (minimal
bass boost)
More room ambience, indirect sound
Commentary
Higher cross-talk from other sound
sources
If sibilance occurs:
Position the microphone slightly to the side and not
directly in front of the mouth.
Caution
Liquids can damage the electronics of the product.
Liquids entering the product can short-circuit the
electronics or damage the mechanics.
Keep all liquids away from the product.
Do not use any solvents or cleansing agents.
Unscrew the sound
inlet basket.
Remove the foam insert
from the sound inlet basket.
Use a slightly damp cloth to clean
the sound inlet basket from the inside
and ouside.
Reinsert the foam insert into the sound inlet basket
then replace the sound inlet basket on the micro-
phone and screw it tight.
When not using the HANDMIC DIGITAL for extended periods
of time:
Handle the HANDMIC DIGITAL with care and store it in
a clean, dust-free environment.
For this, use the supplied pouch or a lint-free,
air-permeable packing material.
For more info on Apogee MetaRecorder and other compatible apps, visit www.apogeedigital.com/apps
2
Apogee PureDigital A/D conversion
Word Length 16 / 24 bit
Sampling frequency 44.1 / 48 / 88.2 / 96* kHz
Latency OS and app dependent
(typ. < 0.5 ms)
Internal signal processing selectable presets via
Apogee‘s Maestro App
Type of Codec multibit DeltaSigma
Gain 0 - 35 dB
Power supplied by iOS device or USB
* no monitoring possible at 90 kHz samling rate
HANDMIC DIGITAL
Transducer principle dynamic
Pick-up pattern cardioid
Frequency response 40 - 16,000 Hz
Sensitivity @ min. gain: –54 dBFS
(80 dB SPL, 1 kHz) @ max. gain: –19 dBFS
Noise level @ min. gain: –96 dBFS(A)
@ max. gain: –74 dBFS(A)
Max. sound pressure level @ min. gain: 134 dB
@ max. gain: 99 dB
Connector Apple MFi certified Lightning
connector or USB
Weight approx. 340 g
Dimensions microphone ø 48 mm, 180 mm length
Cable length approx. 2 m
Temperature range 0 °C to +50 °C
Storage: –25 °C to +70 °C
Relative air humidity max. 95% @40%
571329_0217_A01_QG_HandMicdigital.pdf 2 09.06.2017 08:16:33
All manuals and user guides at all-guides.com