Sound Sation VOCAL 300 PRO 3P User manual

USER MANUAL
PRO Dynamic Mic pack
VOCAL 300 PRO 3p
www.soundsationmusic.com

2
Dear customer,
First of all thanks far purchasing a SOUNDSATION® product. Our
mission is to satisfy all possible needs of musical instrument and profes-
sional audio and lighting users offering a wide range of products using
the latest technologies.
We hope you will be satised with this item and, if you want to collabo-
rate, we are looking for a feedback from you about the operation of the
product and possible improvements to introduce in the next future. Go
to our website www.soundsationmusic.com and send an e-mail with
your opinion, this will help us to build instruments ever closer to custom-
er’s real requirements.
One last thing: read this manual before using the instrument, an incor-
rect operation can cause damages to you and to the unit. Take care!
The SOUNDSATION Team
TABLE OF CONTENTS
1. FEATURES ............................................................................ page 3
2. TECHNICAL SPECIFICATIONS ............................................ page 3
3. FREQUENCY RESPONSE GRAPH...................................... page 3
4. POLAR PATTERN GRAPH.................................................... page 4
5. VOCAL 300 RETAIL BOX CONTAINS................................... page 4
6. IMPORTANT INSTRUCTIONS .............................................. page 5
7. WARRANTY AND SERVICE.................................................. page 6
8. WARNING.............................................................................. page 7

3
1. FEATURES
f3 Dynamic vocal microphone with smooth mid-frequency presence
rise for excellent voice reproduction
fWide frequency response for crystal yet clear sound
fHigh signal output, lets your voice cut through
fCardioid polar pattern minimizes ambient noise and feedback
fOn/off switch
f3 Microphone stand adapters included
fHigh-quality components and exceptionally rugged construction
2. TECHNICAL SPECIFICATIONS
Type Dynamic
Directivity Cardioid
Polar Pattern Uni-Directional
Frequency Response 68Hz - 17.2kHz (±3dB)
Sensitivity -60dB ±3dB (0dB=1V/Pa @ 1kHz)
Output impedance 300 ±15%
3. FREQUENCY RESPONSE GRAPH
-20dB
-30dB
-40dB
-50dB
-60dB
-70dB
-80dB
-90dB
-100dB
-110dB
-120dB
20Hz 30Hz 50Hz 100Hz 200Hz 300Hz 500Hz 1kHz 2kHz 3kHz 5kHz 10kHz 20kHz
dBV / Pa

4
4. POLAR PATTERN GRAPH
5. VOCAL 300 PRO 3P BOX CONTAINS
 PLEASENOTE:Technicalspecicationsandappearance
subjecttochangewithoutnotice.Theinformationcontained
hereiniscorrectatthetimeofprinting.
3x VOCAL 300
PRO Microphones 3x Microphone Clamps User manual

5
6. IMPORTANT INSTRUCTIONS
1. Read these instructions. Keep these instructions. Heed all warn-
ings. Follow all instructions.
2. Pay attention to insert the connector into the device completely to
avoid contact NG (no sound or staccato).
3. If the head of the microphone is covered by hand or brought close
to the speaker, a howling sound may be generated. To prevent
this, rst decrease the volume, then place the microphone so
that it is not pointed to the speaker and that there is a sufcient
distance between the microphone and speaker.
4. It is important to keep foreign particles out of the grill and the
windscreen because they may alter the frequency response of the
microphone. The grill shall be periodically cleaned using warm,
soapy water, rinsed with plain water and let dry before replacing.
5. Keep the microphone far from magnetic elds, otherwise per-
manent magnet will lose its magnetism, thus reducing capsule
sensitivity and affect the sound quality.
6. Avoid dropping or hitting.
7. Insert the XLR connector into the microphone. If necessary, rotate
the connector to align the key on the connector and the groove in
the microphone. Push the connector into the microphone until it
clicks.
8. Do not pull the cable strongly to avoid cable broken.
9. Do not place near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including ampliers) that produce
heat.
10. Only use attachments/accessories specied by the manufacturer.
11. Do not disassemble the microphone or modify the inside to avoid
malfunction. Refer all servicing to qualied service personnel. Ser-
vicing is required when the apparatus has been damaged in any
way, such as liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

6
7. WARRANTY AND SERVICE
All SOUNDSATION products feature a limited two-year warranty. This
two-year warranty is specic to the date of purchase as shown on your
purchase receipt.
The following cases/components are not covered from the above
warranty:
• Any accessories supplied with the product
• Improper use
• Fault due to wear and tear
• Any modication of the product effected by the user or a third party
SOUNDSATION shall satisfy the warranty obligations by remedying
any material or manufacturing faults free of charge at SOUNDSATION’s
discretion either by repair or by exchanging individual parts or the entire
appliance. Any defective parts removed from a product during the
course of a warranty claim shall become the property of SOUNDSA-
TION.
While under warranty period, defective products may be returned
to your local SOUNDSATION dealer together with original proof of
purchase. To avoid any damages in transit, please use the original
packaging if available. Alternatively you can send the product to
SOUNDSATION SERVICE CENTER – Via Enzo Ferrari , 10 – 62017
Porto Recanati - Italy . In order to send a product to service center you
need an RMA number. Shipping charges have to be covered by the
owner of the product.
For further information please visit www.soundsationmusic.com

7
8. WARNING
PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and
Liechtenstein) only
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2202/96/EC) and
your national law.
This product should be handed over to a designated collection point,
e.g., on an authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste electrical
and electronic equipment (WEEE).
Improper handling of this type of waste could have a possible nega-
tive impact on the environment and human health due to potentially
hazardous substances that are generally associated with EEE. At the
same time, your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources.
For more information about where you can drop off your waste equip-
ment for recycling, please contact your local city ofce, waste authority,
approved WEEE scheme or your household waste disposal service.
This product is imported in EU by
FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy
Soundsation® is a registered trademark of FRENEXPORT SPA

Ver 1.0 - Sept. 2016
www.soundsationmusic.com