Sound Storm SDVD100 User manual

2
FEATURES
Compatible with PAL DVD (Video
CD) and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
• L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
• Supplied remote handles
multi-function software (multi-language
audio-track/subtitle, multi-angle, multi-
story, etc.), plus all basic functions.
USE THIS PRODUCT SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
Use Authorized Service Centers
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Center list included with this
product for service assistance.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30˚.

Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
The Player......................................................................................................6
Installation .....................................................................................................7
Electric Connection ......................................................................................8
Remote Control...........................................................................................10
Location and Function of Keys................................................................10
Preparing the Remote Control.................................................................12
Loading/Ejecting a disc..............................................................................12
Loading a disc .........................................................................................12
Ejecting a disc .........................................................................................12
Operation .....................................................................................................13
Basic Play .............................................................................................................13
On-Screen Display Function.................................................................................15
Multi-audio Language Function............................................................................16
Menu Function .....................................................................................................16
Title Menu Function ..............................................................................................16
Multi-subtitle Language Function ........................................................................16
Multi-angle Function.............................................................................................16
MP3 Disc Play.......................................................................................................17
Setup ............................................................................................................18
Initial Setup ...........................................................................................................18
General Setup.......................................................................................................18
Speaker Setup ......................................................................................................20
Audio Setup ..........................................................................................................20
Preferences Setup ................................................................................................21
Defaults Table .......................................................................................................23
Trouble Shooting.........................................................................................24
Specifications..............................................................................................25
3
CONTENTS

4
CAUTION:
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HERE MAY RESULT
IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
•TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
•TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
•THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
SAFETY INFORMATION
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.

DISC NOTES
5
Disc formats supported by this player
DVD
12 cm disc
(Single-sided disc only)
Video CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
Discs which cannot be played with this
player
•DVD-ROM
•DVD-R/DVD-RAM
•CDV
•CD-G
Handling and Cleaning
•Dirt, dust, scratches and warping disc
will cause misoperation.
•Do not place stickers or make
scratches on discs.
•Do not warp discs.
•A disc should always be kept in its
case when not in use to prevent from
damaging.
•Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handling
and conditions in the usage environment.
V
I
D
E
O
Note these scratches are not an
indication of any problem with the player.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Rough spots
on inside edge
Ball point pen
or pencil
Rough spots on
outside edge
Label side up
Do not touch
the underside
of the disc
Do not bend
Wipe the disc from center
toward the outside edge

6
THE PLAYER
FRONT VIEW
BACK VIEW
2467589 1
1. POWER ( )
2. EJECT ( )
3. DISC SLOT
4.
/
( PLAY/PAUSE )
5. (STOP)
6. ( NEXT )
7. ( PREVIOUS )
8. Remote Sensor
9. Reset
10. DC 12V IN Socket
11. DC 12V OUT Socket
12. REMOTE Socket
13. DIGITAL AUDIO
14. AUDIO OUTPUT L/R
15. VIDEO OUTPUT
151413121110
/
3

7
INSTALLATION
Note:
1. First remove the two screws that lock the DVD mechanism, then attach the brackets
on both sides of unit with screws (M4x5), last install the unit with screws (M5x25).
2. When installing the unit, you can slide the screw (M5x25) to left side or right side to
meet your needed position. In the figure above, select two screw holes among the
four screw holes that are marked 1, 2, 3 and 4 to secure the bracket.
SCREW
M4x5
12
3
SCREW
M5x25
SCREW
M4x5
12
34
SCREWS LOCKED THE DVD MECHANISM

8
ELECTRIC CONNECTION
METHOD A
Use the conversion cable to obtain DC 12V power supply input through the AC/DC
ADAPTER or the cigarette lighter according to the figure below:
AC/DC
ADAPTOR
(OPTIONAL)
CIGARETTE LIGHTER
DC 12V IN
DC 12V OUT
REMOTE DIGITAL
AUDIO
A/V OUT
L/R VIDEO
YELLOW
RED
WHITE
VIDEO OUT
AUDIO R OUT
AUDIO L OUT
DIGITAL AUDIO
(OPTIONAL)
REMOTE CONTROL RECEIVER
DVD PLAYER

DC 12V IN
DC 12V OUT
REMOTE DIGITAL
AUDIO
A/V OUT
L/R VIDEO
DVD PLAYER
9
ELECTRIC CONNECTION
YELLOW
RED
WHITE
VIDEO OUT
AUDIO R OUT
AUDIO L OUT
DIGITAL AUDIO
(OPTIONAL)
REMOTE CONTROL RECEIVER
FUSE (3A)FUSE (0.5A)
MEMORY/BATTERY (B+) (YELLOW)
GROUND (B-) (BLACK)
IGNITION SWITCH (ACC+) (RED)
METHOD B
According to the figure below, install the unit in the car and obtain DC 12V power
supply input.

10
REMOTE CONTROL
6
1
3
7
11
4
8
10
5
9
12
13
14
16
15
17
20
18
19
2421
28
22
32
23
25
29
2726
3130
2
LOCATION AND FUNCTION OF KEYS

11
REMOTE CONTROL
1. POWER Press POWER to turn the unit ON or OFF.
2. EJECT Press to eject the disc.
3. MUTE Press to mute the sound.
4. SUBTITLE Changing of the SUBTITLE language on multi-subtitle language
DVD disc.
5. ANGLE Changing of the view angle on multi-angle DVD disc.
6. DISPLAY Display statistical disc information during playback.
7. PBC Changing between PBC ON and PBC OFF on the VCD disc.
8. SETUP Display the SETUP menu.
9. PAL/NTSC Switch between PAL mode and NTSC mode.
10. AUDIO Changing of the AUDIO soundtrack on multi-audio soundtrack
DVD disc. Changing of the sound mode of the VCD disc.
11. TITLE Display the TITLE menu that is stored in DVD disc.
12. MENU Display the root menu that is stored on the DVD disc
13. / , / In case of MENU mode, / , / buttons served as cursor
buttons to select item left/right, ahead/back.
14. ENTER Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on TV screen.
15. / Changing for slow forward/reverse playback motion.
16. Press to play the disc.
17. / Press to search forward rapidly & to search reverse rapidly.
18. / Press to skip to the next track & press to skip back one
track.
19. Press it to stop playback.
20. Press it to pause playback.
21. 0 - 9 Numeric buttons
22. 10+ Tens digit select button, cooperatively used with numeric buttons.
23. CLEAR When you input a number in error, press the button to clear it.
24. VOLUME+/- Press VOLUME+/- button to increase the volume level.
25. ZOOM Allows the picture to be increased in size.
26. RESUME When in stop mode, press the button, the play can be resumed
from the stop point.
27. GOTO Disc search button, cooperatively used with numeric buttons.
28. STEP Press to stop at the next picture.
29. RANDOM Allows the track played in random order.
30. PROGRAM Allows the track played in the order you programmed.
31. REPEAT Switch the Repeat mode of discs.
32. A-B A-B repeat allows a passage to be repeated continuously.

12
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the front
IR mark (remote control signal reciver).
Operation angle: About ±30 degree in
each the direction of the front of the IR
mark.
Loading a Disc
1. Turn the ignition on the accessory
position.
2. Press the POWER button (1).
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
Ejecting a Disc
Press button (3) on the front panel or
EJECT button on the remote control to
eject the disc.
LOADING AND EJECTING A DISC
31
/
2

13
OPERATION
Basic Play
Stopping Play
- Briefly press the (Stop) button to
stop the unit playback, when the
(Play) button is pressed, normal
playback will continue.
- Press (Stop) button twice to stop
the playback and go back to initial
Track/Chapter.
Rapid Forward/Rapid Reverse
Press & during play. Each time
the button is pressed, the speed of rapid
forward/reverse changes according to
the disc as follow.
DVD/VCD/CD/MP3:
Skipping Track
Press / on the remote handset or
/ buttons on the front panel during
playback.
Press or to skip to next track, and
or to back one track.
Note: For some VCD 2.0 dics
(PBC-playback control), / and
/ buttons may be unavailable.
Slow Motion Play
Press / during play.
Each time the button is pressed, the
speed of slow forward/reverse changes
according to the disc as follow.
DVD:
Normal Playback 2X 4X 6X 8X
Pause (still picture)
Pressing button on the remote control
or /button on the front panel of the
DVD unit during playback will stop play
temporary. Return to normal playback,
press button on the remote control or
/button on the front panel.
MUTE
Will mute the sound, but the disc
continues playing. When you unmute the
sound (press MUTE again), sound will
resume.
Repeat
FOR DVD:
Press the REPEAT button to select repeat
mode as follow.
FOR VCD/CD:
Press the REPEAT button to select repeat
mode as follow.
1. Continuously repeat at the current
chapter/track, when selected REP-
ONE mode.
2. Select REP-ALL mode to continuously
repeat all chapter/track on the current
disc.
3. When the player finishes playback of
the current disc last chapter/track, it
will stop and display the elapsed time.
When REPEAT OFF mode is selected,
REP-ONE & REP-ALL disappears
from screen display.
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
CHAPTER REPEAT ON TITLE REPEAT ON
REPEAT OFF
REP-ONE REP-ALL REPEAT OFF
Normal Playback 2X 4X 8X

PROGRAM
In stop mode, press PROGRAM button,
the screen will display “PROGRAM
P00:00”. For example: press numeric
button 4 and button, “PROGRAM
P01:04”appears. It means track 4 will be
played first.
Reset
Reset button is placed on the front panel
and must be activated with a ball point
pen or thin metal object. Reset button is
to be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
-
All the function buttons do not operate.
- Error symbol on the display.
Remote Sensor (IR)
Point the remote handset to the remote
sensor on the front panel. Receive the
signal from remote handset.
Turning the player on/off
Press the (POWER) button on front
panel or press (POWER) button on
remote control to turn the player on or
off.
14
A-B
A-B repeat allows a passage to be
repeated continuously. Press A-B button
at the start of the required passage, then
press A-B button again at the end of the
passage. To revert to normal playing,
press A-B button again. Each time the
button is pressed, the screen will display
as follows:
A TO B SET A A TO B SET B A TO B CANCELLED
Disc Search (GOTO)
FOR DVD
Press GOTO button twice, the screen will
display the following message:
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
FOR VCD (WITH PBC OFF)/CD:
Press GOTO button once, the screen will
display the following message:
Use numeric buttons to input the time
directly.
ZOOM
Allows the picture to be increased in size.
Press ZOOM to toggle among 1.5 scale,
2.0 scale and 3.0 scale.
RANDOM
Press RANDOM button, track selection
will be made in random order. The display
screen will show “SHUFFLE ON”on the
screen. Press RANDOM button again,
“SHUFFLE OFF”appears and release
the mode.
TITLE 01/01 TIME -- : -- : --
00:00:25
GOTO -- : --
00:00:25
OPERATION

15
OPERATION
(2) Press DISPLAY for the second time:
(3) Press DISPLAY for the third time:
(4) Press DISPLAY for the fourth time:
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
CD:
(1)Press DISPLAY for the first time:
(2)Press DISPLAY for the second time:
(3)Press DISPLAY for the third time:
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
DVD:
(1) Press DISPLAY for the first time:
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
(2) Press DISPLAY for the second time:
(3) Press DISPLAY for the third time:
(4) Press DISPLAY for the fourth time:
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
VCD:
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
CHAPTER REMAIN
00:01:39
CHAPTER ELAPSED
00:00:24
SINGLE ELAPSED
00:00:25
SINGLE REMAIN
00:03:15
TOTAL ELAPSED
00:00:25
TOTAL REMAIN
00:40:35
TITLE REMAIN
01:46:58
SINGLE ELASPED
00:00:25
TRACK : 01
TOTAL TRACK : 14
SINGLE REMAIN
00:03:15
TRACK : 01
TOTAL TRACK : 14
TOTAL ELASPED
00:00:25
TRACK : 01
TOTAL TRACK : 14

(4) Press DISPLAY for the fourth time:
(5)
Press DISPLAY for the fifth time:
The message on the screen will be cleared.
MP3 (When set to NO MENU in SMART
NAV item):
(1) Press DISPLAY for the first time:
(2) Press DISPLAY for the second time:.
(3)
Press DISPLAY for the third time:
The message on the screen will be cleared.
Multi-audio Language Function
For DVD:
Press AUDIO during playback.
Each time the button is pressed, the
audio soundtrack language changes on
sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different languages
soundtrack are recorded, will be
displayed on the top left corner of the
screen.
For VCD:
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
16
MENU Function (For DVD Only)
Press MENU button while the disc is
playing and the disc root menu will be
displayed. You can navigate with the
remote control navigation keys and
select a feature with the ENTER key.
TITLE Menu Function (For DVD
only)
If the DVD has multiple titles recorded on
the disc, it can select preferred title from
the title menu to start playback.
- Press TITLE during playback.
The title menu is display.
- Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
Multi-subtitle Language Function
(For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed, the
subtitle language changes in sequential
order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle languages
are recorded, will be displayed on
the top left corner of the screen
Multi-angle Function (For DVD
only)
Press ANGLE during playback.
Each time the button is pressed, the
angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only works for discs
having scenes recorded at different
angles.
- When no different angles are
recorded, will be displayed on the
top left corner of the screen
OPERATION
MONO LEFT MONO RIGHT STEREO
TOTAL REMAIN
00:40:35
TRACK : 01
TOTAL TRACK : 14
CHAPTER ELASPED 00:00:25
TOTAL TRACK : 123
TRACK : 01
CHAPTER REMAIN 00:04:25
TOTAL TRACK : 123
TRACK : 01

17
MP3 Disc Play
MP3 disc is playing as the format of
FOLDER.
For example:
Use / , / to select the item or
folder, then press ENTER button.
Pressing REPEAT button repeatedly can
select three kinds of repeat play mode.
REP-ONE:
Play the same song again.
FOLDER REPEAT:
Play all songs in the current directory
in sequence again.
FOLDER:
Play all songs in the current directory
once.
When select PLAY MODE, press / to
change between the following modes:
During the playback, use or to skip
an item forward or back.
: Rapid reverse, : Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
ROOT 0
MP3 MUSIC 1
SKY
MP3 HEAR YOUR
DISC
OPERATION
ROOT
SMART NAVI
PLAY MODE
SINGLE REP-ONE FOLDER FOLDER REP
DISC SCAN DISC DISC REP RANDOM
SHUFFLE ON PROGRAM PXXX

18
SETUP
INITIAL SETUP
SETUP MENU --- MAIN PAGE
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player is under STOP mode.)
2. The initial SETUP menu is displayed.
3. Select the preferred item by using the
/ buttons.
4. Press ENTER buttons.
a. GENERAL SETUP
This setup page includes all the
items of TV display & audio output
feature. For details please refer to
GENERAL SETUP MENU.
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
d. PREFERENCE SETUP
This setup page includes all the
configuration of support feature.
For details please refer to
PREFERENCES SETUP MENU.
GENERAL SETUP
--- GENERAL PAGE ---
TV display setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
Video Material
Normal
TV Screen
Pan Scan Letter-box
4:3 Wide (16:9)
4:3
16:9
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
NORMAL/PS
NORMAL/LB
WIDE

--- GENERAL PAGE ---
OSD LANG type setup
Select the preferred OSD (On Screen
Display) language by using the /
buttons.
--- GENERAL PAGE ---
CAPTIONS setup
When playing DVD disc, activate the
CAPTIONS feature by selecting ON and
the captions (such as the actor dialogue)
appears on the screen; deactivate this
feature by selecting OFF and the
captions will not appear.
19
SETUP
--- GENERAL PAGE ---
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on image or
picture with noise or distortion.
--- GENERAL PAGE ---
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVD disc is playing, (the angle mark)
will appear on the screen; if it is set to
OFF, the mark will not appear.
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
AUTO
HI-RES
N-FLICKER
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
ON
OFF
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
ON
OFF
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH

20
SETUP
--- GENERAL PAGE ---
SCR SAVER setup
Select the SCR SAVER ON/OFF.
SPEAKER SETUP
--- SPEAKER SETUP PAGE ---
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
- Select the STEREO to activate simple
stereo mode.
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
CAPTIONS
SCR SAVER
MAIN PAGE
ON
OFF
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
MAIN PAGE
ANALOG
SPDIF/RAW
SPDIF/PCM
AUDIO OUT
OP MODE
DYNAMIC
LPCM OUTPUT
MAIN PAGE
LINE OUT
RF REMOD
DOWNMIX
MAIN PAGE
LT/RT
STEREO
AUDIO SETUP
--- AUDIO SETUP ---
AUDIO OUT
- Select ANALOG mode to activate
analog audio output.
- Select SPDIF/RAW mode to activate raw
digital audio output. And the digital audio
format depends on the disc record format.
- Select SPDIF/PCM mode to activate
PCM digital audio output.
--- AUDIO SETUP ---
OP MODE
–LINE OUT: Line out mode, with digital
dialog normalization.
–RF REMOD: RF remodulation mode,
with heavy compression and digital
dialog normalization.
It is recommended to select LINE OUT
mode.