Soundcore Trance User manual

Soundcore
Soundcore Trance / Mega
User Manual
1 Important Safety Instructions
● Please read this user manual carefully and save it for future reference.
● Do not place naked flame sources, such as lighted candles, on or near the
product.
● Do not install near any heat sources, such as radiators,heat registers,stoves,or
other apparatus.
● Clean only with a dry cloth.
● Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
● Protect the power supply or cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the product.
● Only use attachments/accessories specified by the manufacturer.
● Unplug this product during lightning storms or when unused for long periods of
time.
● The maximum ambient temperature during use of the product must not exceed
45°C.
● Suitable for safe use in tropical and non-tropical areas.
● Only suitable for safe use in areas below 2000m above sea level.
● Do not make unauthorized alterations to the product; doing so may compromise
safety, regulatory compliance, system performance, and may void the warranty.
● Refer all servicing to qualified service personnel. Servicing is required when the
product has been damaged in any way.
● The product contains battery pack, so should not be exposed to excessive heat
such as sunshine, fire or the like.

2 What’s Included
3 At a Glance
3.1 Top Panel

①
● Press and hold for 2 seconds to power on / off.
②
● Press to enter Bluetooth pairing mode.
● Press and hold to enter True Wireless Stereo (TWS) mode while pairing.
③ (Source input button)
● Press repeatedly to select source input.
● Press and hold for 2 seconds to enter Bluetooth pairing mode.
④ /
● Press to skip to previous / next track.
⑤ - / +
● Press to decrease / increase volume.
⑥ (Multi-function button)
● Press to play / pause music.
● Press to answer or end a call.
⑦ (Light effect button)
● Press to turn on / off and adjust the light mode.
⑧
● Press to turn on or off the BassUP mode.
● Press and hold for 2 seconds to switch between indoor / outdoor sound mode.

3.2 Connectors (A3392)
① DC IN
● Connect to the provided power adaptor.
② USB
● Connect to a USB storage device.
● Charge a USB device.
③ AUX
● Connect to an external audio device through a 3.5mm aux cable (not provided).
④ Guitar / Mic port
● Connect to a guitar / microphone (not provided).
⑤ Guitar / Mic volume knob
● Rotate to adjust guitar / microphone volume.

3.3 Connectors (A3393)
① DC IN
● Connect to the provided power adaptor.
② USB
● Connect to a USB storage device.
● Charge a USB device.
③ AUX
● Connect to an external audio device through a 3.5mm aux cable (not provided).

4 Charging
4.1 Charging your Soundcore Speaker
● Fully charge this speaker when using for the first time, which prolongs the
lifespan of the built-in battery.
Use the provided power adaptor to charge this speaker.
LED behaviour ( )
Battery level <10%
Battery level 25% - 50%
Battery level 50% - 75%
Battery level 75% - 100%
Fully charged

4.2 Checking Battery Level
Press any button to check the remaining battery level when it is powered on.
LED behaviour ( )
Battery level <10%
Battery level 10% - 25%
Battery level 25% - 50%
Battery level 50% - 75%
Battery level 75% - 100%
4.3 Charging your USB Devices
Use this speaker as an external battery to charge your USB devices.
Connect your USB device to the USB port on the rear of this speaker.

5 Powering On / Off
Connect the provided power adaptor to the DC IN power jack of this speaker, and then
to an AC mains outlet.
Press and hold for 2 seconds to power on or off.
● Built-in battery can be used as power supply of this speaker.
● Unplug the power adaptor from the AC mains outlet when not in use for an
extended period of time.
● If this speaker is powered by built-in battery, it will power off automatically after
30 minutes of button inactivity or no audio playback.
● If this speaker is connected to AC power and the built-in battery is fully charged,
it will power off automatically after 30 minutes of button inactivity or no audio
playback.

6 Using your Soundcore
6.1 Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
LED behaviour ( )
Flashing blue
Bluetooth pairing
Steady blue
Bluetooth connected
●Dual Bluetooth Connection: This speaker can pair up to two mobile devices via
Bluetooth. This speaker can only play music on one mobile device at the same
time.

● To pair with another Bluetooth device, press to re-enter Bluetooth pairing
mode.
● To play from another connected device, pause the currently active device first.
● Each time you power on your Soundcore speaker, it will automatically connect to
your last connected device if available within the Bluetooth range. If not, press
to enter Bluetooth pairing mode.
● You may also control music in the Soundcore App.
6.2 True Wireless Stereo (TWS) Mode
With True Wireless Stereo technology, you can pair your Soundcore Trance / Mega
with another Soundcore Trance / Mega to explore the best sound effects with left and
right sound channels separated on both speakers.
Press and hold on both Soundcore Trance / Mega speakers simultaneously to
enter TWS mode.
LED behaviour ( )