Soundmask SM-DR-5000 User manual

www.soundmask.com.au
MODEL SM-DR-5000
OPERATING MANUAL
ZONE DISTRIBUTOR

01 www.soundmask.com.au
Safety Instructions
1. Read, follow and retain these instructions.
2. Read all warnings.
3. The apparatus must not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, may be placed on the apparatus. Do not use
this apparatus near water. Clean only with a damp
cloth.
The information furnished in this manual does not
include all of the details of design and engineering
of this particular product; nor does it cover every
possible application or situation concerning its
usage, which may occur during the installation,
operation or maintenance of the product.
IMPORTANT - THE PRODUCT
REQUIRES CLASS 2 OUTPUT WIRING
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE
TOP OR BOTTOM COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL. DISCONNECT POWER CORD BEFORE
REMOVING REAR PANEL COVER TO ACCESS GAIN
SWITCH.
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
CAUTION Do not locate sensitive high-gain
equipment such as preamplifiers or tape
decks directly above or below this unit.
Because this amplifier has a high power
density, it has a strong magnetic field which
can induce hum into unshielded devices that
are located nearby. This field is strongest just
above and below the unit. If an equipment
rack is used, we recommend locating the
amplifier(s) at the bottom of the rack and the
preamplifier or other sensitive equipment at
the top.
4. The apparatus must be connected to a mains
socket outlet with a protective earthing connection.
5. The appliance coupler must remain readily
operable for disconnection from the mains.
6. Do not block any of the ventilation openings.
Install in accordance with the manufacturer’s
instructions.
7. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
that produce heat.
8. Do not install the safety purpose of a polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type
plug has two blades and third grounding plug. The
wide blade or the third prong is provided for your
safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
9. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience at plugs,
convenience receptacles, and the point where they
exit from the apparatus.
10. Only use power cord from attachments/
accessories specified by the manufacturer.
11. Use only with a cart, stand, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from flip-over.
12. Unplug this apparatus during lightning storms or
when unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, or does not
operate normally.
Please follow the instructions in this manual to
obtain the optimum results from this unit. We also
recommend that you keep this manual handy for
future reference.
IMPORTANT SAFETY INFORMATION

02
Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
GENERAL DESCRIPTION DESIGN FEATURES
SPECIFICATIONS
The unit is a five channel volume control, each
channel with separate attenuator. It is a single rack
unit designed for convenient installation. Each
channel has a maximum loading capability of 200
watts.
› Ideal for controlling volume in up to five speaker
zones
› An override feature is provided to disable the
volume control settings in the event of an
emergency
› Five channel input and output
› Five independent channels, 200 watts per channel,
1000 watt control capacity
› Five-step attenuation per channel
› Frequency response: 100Hz~16KHz, distortion less
than 1.5dB
Model SM-DR-5000
Power requirements ~240V/50Hz 24DC (Optional)
Dimensions 484 x 144 x 44 mm
Net weight 4.6Kg
Gross weight 5.9Kg
Compliance
Safety information Mount unit in locations that provide unobstructed air movement to minimise the risk of overheating.

03 www.soundmask.com.au
USER INTERFACE
FRONT PANEL REAR PANEL
1. ZONE 1 - 5 : ve channel volume controls. 1. INPUT (CH1 - CH5) : Signal input (CH1 - CH5).
2. OUTPUT (CH1 - CH5) : Signal output (CH1 - CH5).
1
1 2
DIMENSIONAL DIAGRAM
484 mm
436 mm
144 mm
44 mm
42 mm

04
Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
EXAMPLE LAYOUT
› The SM-DR-5000 is capable of servicing up to 100 transducers for each generator.
› Diagram not to scale.
NOTES
RANDOM DIGITAL NOISE GENERATOR SM-GR-3100
ZONE DISTRIBUTOR SM-DR-5000
CEILING TRANSDUCER SM-T-1200

Copyright © 2015 Soundmask Australia Pty Ltd. All Rights Reserved.
To the best of our knowledge, the material contained within this document was accurate at the time of printing.
No liability or otherwise is assumed for the accuracy of this document.
No warranty is given or implied as to the accuracy of any part of the document.
TROUBLESHOOTING
If the unit is running slowly or “freezes up”, reset the unit by turning it off using the power switch.
Leave the unit to reset for 15 minutes before turning the power switch on again.
For any further problems, contact us via the detail below.
CONTACT
NOTES
1300 734 168 (within Australia)
[phone]
[email protected]
Soundmask Australia Pty Ltd
Soundmask Australia Pty Ltd
PO Box 4068
Balwyn VIC 3103
AUSTRALIA
www.soundmask.com.au