SOUNDMASTER MCD - 5035USB User manual

MCD – 5035USB
Bedienungsanleitung vor Inbetriebnahme lesen.
Read instructions carefully before using the unit.
Avant de metre en service votre appareil, lisez attentivement ce instructions.

ENGLISH
LOCATION OF CONTROLS
1) DUST COVER 17) DISC 1,2,3 SELECTOR
2)LCDDISPLAY 18)CDDOOR
3) REMOTE SENSOR 19) PRE-SET EQ BUTTON
4) STANDBY LED INDICATOR 20) CD STOP BUTTON
5) POWER ON/STANDBY BUTTON 21) CD PLAY / PAUSE BUTTON
6) TIMER/CLOCK ADJUST BUTTON 22) VOLUME UP-DOWN BUTTON
7) HIGH SPEED DUBBING BUTTON 23) SKIP / SEARCH / TUNING UP BUTTON
8) MEMORYBUTTON 24)SKIP / SEARCH / TUNING DOWN BUTTON
9) REPEAT/RANDOM BUTTON 25) RECROD BUTTON
10) DISC CHANGE BUTTON 26) CASSETTE DOOR (2)
11) PRE-DN DUTTON 27) DECK 2 CONTROL KEYS
12) 3.5 MM HEADPHONE JACK 28) CD DOOR OPEN/CLOSE BUTTON
13) PRE-UP BUTTON 29) SD/MMC CARD SLOT
14) FUNCTIONS SELECT BUTTONS 30) USB SOCKET
15) CASSETTE DOOR (1) 31) SPINDLE ADAPTOR
16) DECK (1) BUTTONS 32) 33/45/78 RPM SPEED SELECTOR
RECORD KEY 33) PICK-UP HOLDER
PLAYBACK KEY 34) SPEAKER WIRE TERMINAL
REWIND KEY 35) AUTO STOP SWITCH
FAST FORWARD KEY 36) FM WIREANTENNA
STO/EJECT KEY 37) AC LINE CORD
PAUSE KEY
CONNECTION
1. CONNECT THE POWER CORD (37) TO AC OUTLET AND SWITCH ON THE MAIN POWER SWITCH AT THE
BACK OF UNIT.
2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE.
3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL LOCATED ON THE REAR SIDE OF THE UNIT.
4. TURN ON THE POWER (5) AND SELECT “CD“ FUNCTION. IF THE LCD DISPLAY (2) IS ON WITH
BACKLIGHTING, IT MEANS THE POWER SUPPLY IS NORMAL. NOW THE SYSTEM IS READY TO PLAY THE
MUSIC.

ENGLISH
SETTING THE CLOCK
1. SET UNIT IN STANDBY MODE.
2. PRESS THE “TIMER/CLK-ADJ” BUTTON (6), THE DISPLAY Will SHOW “ 12H “ OR “ 24H “, THEN PRESS THE
PRE-UP (13) OR PRE DN (11) BUTTON TO SELECT THE APPROPIATED HOUR FORMAT (12 HOUR OR 24
HOUR). PRESS THE “TIMER/CLK-ADJ” BUTTON (6) TO CONFIRM.
3. PRESS PRE-UP (13) OR PRE DN (11) BUTTON TO SET THE CORRECT HOUR.
4. PRESS THE SKIP (24) OR SKIP (23) BUTTON TO SET THE CORRECT MINUTES.
5. PRESS ”TIMER/CLK-ADJ” BUTTON (6)TO STORE THE CORRECT HOUR.
¾THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER
SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS “TUNER/BAND” BUTTON (14)AND SELECT THE DESIRED BAND (AM OR FM).
2. TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING “+” OR “-” BUTTON (23,24).
3. ADJUST VOLUME CONTROLS (22) TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1. PRESS ”TUNER/BAND” BUTTON (14) AND SELECT THE DESIRED BAND (AM OR FM).
2. PRESS AND HOLD THE TUNING “+” OR “-” BUTTON (23,24) FOR 1-2 SECONDS AND THEN RELEASE
3. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTILA RADIO STATION IS REACHED.
4. REPEAT STEP 3 & 4 UNTILTHE DESIRED RADIO STATION IS BEING REACHED.
5. ADJUST VOLUME CONTROLS (22) TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 40 RADIO STATIONS (30 FM,10AM) IN THE MEMORY.
1. SET TO RADIO MODE
2. TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.
3. PRESS “TIMER/CLK-ADJ” BUTTON (6) TO ENABLE PROGRAM STATE.
4. PRESS “ PRE-UP “ OR “ PRE-DN” BUTTON (11,13) TO SELECT THE DESIRED STATION MEMORY FOR
STORAGE.
5. PRESS “TIMER/CLK-ADJ” BUTTON (6)AGAIN TO CONFIRM THE SETTING.
6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7. PRESS “PRE-UP” OR “ PRE-DN” BUTTON (11,13) TO SELECT THE PRESET STATIONS IN ORDER.
8. TO RETURN NORMALTUNER MODE, LEAVE KEYS FREE.
¾THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
¾THERE ARE 5 SECONDS FOR PROGRAM STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO
NORMAL TUNER MODE AUTOMATICALLY.
¾YOU CAN OVERWRITEA PRESENT STATION BY STORINGANOTHER FREQUENCY IN ITS PLACE.
RADIO DATA SYSTEM (RDS)
THIS IS THE FEATURES TO DISPLAY THE INFROMATION WHICH RELEASED FROM THE RADIO BROADCASE:-
RDS MODE : PRESS TO ACTIVE THE RDS FUNCTION AND THE PROGRAM SERVICE STATION NAME (PS) IS
BEING DISPLAYED.
RDS SEARCH : PRESS TO SELECT THE PROGRAM TYPE YOU WANT TO LISTEN, THEN PRESS THE TUNING +/-
BUTTON TO START RDS SEARCHING AND THE UNIT CAN AUTOMATICALLY DETECT A SUITABLE STATION,
WHICH IS CURRENTLY BROADCASTING WITH PROGRAM TYPE IDENTIFICATION (PTY) SIGNAL.
REMARK : NO “ PS “ NOR “ PTY “APPEARS IF NO SIGNAL IS SENT.
PROGRAMMES ARE CLASSIFIED AS FOLLOWS:
NEWS, AFFAIRS (current affairs), INFO (information), SPORT EDUCATE (education), DRAMA, CULTURE, SCIENCE,
VARIED, POP M (pop music), ROCK M (rock music), MOR M (middle of the road music), LIGHT M (light classical),
CLASSICS (serious classical), OTHER M (other music).

ENGLISH
NOTES
PROGRAMME SERVICE STATION NAME (PS)
THIS IS A NAME CONSISTING OF LESS THAN 8 ALPHANUMERIC CHARACTERS, WHICH IS DISPLAYED IN
ORDER TO INFORM LISTENERS ABOUT THE PROGRAMME SERVICE BEING BROADCASTBY THE RADIO
STATION. EXAMPLE: BBC 1
PROGRAMME TYPE IDENTIFICATION (PTY)
PTYALLOWS SELECTION BY ONE OF 15 PROGRAMME TYPES RATHER THAN BY A STATION.
RADIO TEXT (TEXT)
INFORMATION SUCH AS THE CAST LIST OF A PLAY OR THE TITLE OF A SONG IS SHOWN ON THE DISPLAY.
CLOCK-TIMER (CT)
CT FUNCTION PROVIDES AN ACCURATE CLOCK SIGNAL.
IF THE CLOCK OF THE SYSTEM IS NOT ADJUSTED AFTER PLUG IN, WHEN A RDS CLOCK IS RECEIVED, THE
SYSTEM WILL AUTOMATICALLY UPDATE THE SYSTEM CLOCK TO THE RECEIVED RDS CLOCK TIME. THE
SYSTEM CLOCK IS NOW ADJUSTED.
FM & FM-STEREO RECEPTION (BY REMOTE HANDSET)
zPRESS THE “ FM-ST/MONO ” BUTTON AT REMOTE HANDSET REPEATEDLY, THE FM PROGRAMS ARE
RECEIVING IN MONO AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN STEREO SIGNALS ARE
WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
zIF STEREO SIGNAL IS BEING RECEIVED, THE “ST” INDICATOR “ ” WILL APPEAR ON LCD (2) TO
SHOW FM STEREO PROGRAM IS NOW RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM : THE RECEIVER HAS A BUILD-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHT ROTATE OR
RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
- FM : THE RECEIVER HASABUILD-IN FM WIRE ANTENNA(36) HANGING AT THE REAR CABINET. THIS WIRE
SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR THE BEST RECEPTION.
PHONO
NOTED:
-REMOVE THE STYLUS PROTECTOR.
-BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. SELECT TO “ PHONO ” FUNCTION FROM FUNCTION SELECTOR (14)
2. SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
4. LIFT THE TONE ARM FROM THE RESTAND SLOWLY MOVE IT TO THE RECORD SIDE.
THE PLATTER WILL START TO ROTATE.
5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
6. ADJUST THE VOLUME TO THE DESIRED LEVEL.
7. AT THE END OF RECORD, THE PLATTER WILLAUTOMATICALLY STOP ROTATING. LIFT
THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
8. TO STOP MANUALLY, LIFT THE TONEARM FROM THE RECORDAND RETURN IT TO THE REST.
REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (35) TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO “ ON “ POSITION TO STOP
THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION.
PLAYING COMPACT DISC
zGETTING START
1. PRESS “CD” BUTTON (14).
2. PRESS “OPEN/CLOSE” BUTTON (28) TO OPEN THE CD DOOR.
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY.
4. PRESS THE “ “ BUTTON (10) OR “ DISC-SKIP” BUTTON ON REMOTE TO TURNING THE CD TRAY, AND
LOADING OUT THE OTHER DISC COMPARMENT.
5. PRESS THE “OPEN/CLOSE” BUTTON (28) TO CLOSE THE CD DOOR.
6. CD SEARCH IS PERFORMING, THE LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF DISC, NUMBER
OF TRACKS & PLAYING TIME OF DISC.

ENGLISH
zPLAY / PAUSE MODE
1. PRESS THE “PLAY/PAUSE” BUTTON (21) TO STARTPLAYBACK, THE FIRST TRACK OF THE FIRST DISC WILL
BE PLAYED AND THE PLAY INDICATOR WILLAPPEAR ON THE LCD DISPLAY.
2. OR PRESS EITHER THE “ DISC 1 ” , “ DISC 2 ” , “ DISC 3 ” BUTTON (17), UNIT WILL PLAY THE DISC INSIDE
THE DESIRE TRAY DIRECTLY.
3. TO INTERRUPT, PRESS THE “PLAY/PAUSE” BUTTON ONCE (21),AND THE INFORMATION ON LCD DISPLAY
(2) WILL START FLASHING. PRESSAGAIN TO RELEASE & RESUME NORMAL PLAYBACK.
zSTOP MODE
1. IF “STOP” BUTTON (20) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP MODE.
zSKIP MODE (SKIP UP /SKIP DOWN )
1. DURING PLAY OR PAUSE MODE, IF “ SKIP + ” BUTTON (23) IS PRESSED IT WILL GO TO NEXT TRACK AND
DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “ SKIP - ” BUTTON (24) IS PRESSED. IT WILL GO BACK TO THE
BEGINNING OF THE TRACK, ORIGIANLTRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS “ SKIP - ” BUTTON(24) AGAIN WILLGO TO THE PREVIOUSTRACK AND REMAIN THE
PLAY OR PAUSE MODE.
zSEARCH MODE (SEARCH UP /SEARCH DOWN )
1. DURING PLAY MODE, IF “ SEARCH + ” BUTTON (23) IS PRESSED & HOLD FOR FEW SECONDS, IT WILL
START SEARCHING FORWARD.
2. DURING PLAY MODE, IF “ SEARCH - ” BUTTON (24) IS PRESSED & HOLD FOR FEW SECONDS. ITWILL STAR
SEARCHING BACKWARDS.
zFOR MP3 DISC
1. AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND FOLDER WILL BE SHOWN
ON THE LCD DISPLAY (2).
2. PRESS “ PRE-UP “ (13) OR “ PRE-DN “(11) BUTTON TO SELECT THE FOLDER NUMBER.
3. PRESS “ SKIP UP “ (23) OR SKIP DOWN (24) BUTTON TO SELECT THE TRACK NUMBER.
4. WHEN THE DESIRED TRACK AND FOLDER IS BEING SELECTED, PRESS THE CD “PLAY/PAUSE” BUTTON
(21) TO START PLAYBACK.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
PRESS THE “ INFO “ BUTTON DURING PLAYBACK OF MP3/WMA DISC, THE SONG TITLE IS BEING DISPLAYED.
PRESS THE “ INFO ” BUTTON AGAIN TO DISABLE THE FUNCTION.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NO TITLE “ OR “ NO ARTIST “ IS BEING
DISPLAYED” ON DISPLAY (1).
- NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MEMORY CARD IS NOT
SUPPORTING BY THE SYSTEM
MP3 TRACK FORMAT REQUIREMENT:-
- BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44.1KHZ AND 48 KHZ DECODABLE
- THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
zREPEAT/RANDOM MODE
PRESS THE REPEAT/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE DISC OR
ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
FOR CD/MP3 DISC
(1) RANDOM PLAY (1 DISC) (2) RANDOM + REPEAT (1 DISC)
(5) OFF MODE (4) REPEAT (1 TRACK) (3) REPEAT (1 DISC)
INDICATOR
PLAY MODE ON LCD DISPLAY
RANDOM (1 DISC) RAN
RANDOM + REPEAT (1 DISC) RAN +
REPEAT (1 DISC) ALL

ENGLISH
REPEAT (1 TRACK)
OFF MODE --------------
zREPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
zRANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD/MP3 DISC PROGRAMMING
UP TO 40 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
THE “ CD STOP ” BUTTON (20)
1. SET IN CD MODE & STOP THE CD PLAYBACK.
2. PRESS THE “MEMNORY” BUTTON (8) , “ MEM “ WILL APPEAR ON LCD DISPLAY (2). MOREOVER, IT WILL
INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP OR DOWN BUTTONS (23,24).
(FOR MP3 DISC, PRESS PRE-UP OR PRE-DN BUTTON (11,13) RO SELECT THE DESIRE FOLDER)
4. PRESS THE“MEMORY” BUTTON (8) TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALLTHE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD “ PLAY/PAUSE ” BUTTON (21) TO
PLAY THE DISC IN ASSIGNED ORDER.
7. PRESS “ CD STOP” BUTTON (20) TO TERMINATE PROGRAM PLAY.
¾AFTER PROGRAM COMPLETE, PRESS “SKIP UP OR DOWN ” BUTTON (23,24) TO REVIEW THE
TRACKS BEING PROGRAMMED. PRESS “ CD STOP “ BUTTON (20) TO EXIT REVIEW MODE.
¾PRESS “ CD STOP “ BUTTON (20)AT CD STOP MODE TO CANCELALL TRACKS BEING PROGRAMMED.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 FILE WHICH STORED IN THE MEMORY MEDIA
WITH USB CONNECTING PORT, MULTI- MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.
1. PRESS FUNCTION BUTTON (14) CD/USB/SD REPEATEDLY TO
SELECT “ USB ” OR “ SD “ MODE.
2. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT
GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN
THE DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON
THE UNDERSIDE OF THE MEMORY CARD SLOT COVER. INSERT
STRAIGHT WITHOUT BENDING.
zCONNECTING THE USB / MEMORY CARD UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO
SYSTEM OR THE STORAGE MEDIA (USB / MEMORY CARD). CHECK TO BE SURE THE DIRECTION IS
CORRECT BEFORE CONNECTION.
3. THE SYSTEM WILL START READING THE STORAGE MEDIAAUTOMATICALLY AFTER CONNECTING, AND
LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL NUMBER OF ALBUM
BEING DETECTED.
4. REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE
REMARK
- THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMAFORMAT ONLY THOUGH THE USB
PORT/MEMORY CARD SLOT.
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT THE MALFUNCTION OF THE SYSTEM. .
ENCODING OF CD FILE INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE NORMAL CD TO MP3 FORMAT AND RECORDING AT MEMORY MEDIA WITH
USB CONNECTING PORT, MULTI- MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.
A) CD ENCODING
I) ECNODING 1 TRACK
1. PERFORM NORMAL PLAYBACK OF THE CD TRACK YOU WANT TO ENCODE & RECORD,
2. PRESS “ REC “ BUTTON (25) DURING THE PLAYBACK OF THE DESIRE TRACK, UNIT WILL DISPLAY “ USB
“ & “ CARD “. (IF BOTH SORUCE ARE READY DURING RECRODING). THEN PRESS SKIP UP OR DOWN
BUTTONS (23,24) TO SELECT AND THEN PRESS “ REC “ BUTTON (25) TO CONFIRM.
3. THE SYSTEM WILLSHOW “USB” OR “CARD” & “ “ AND FLASHING. ENCODING IS PERFORMING NOW.
4. PRESS CD STOP BUTTON (20) TO TERMINATE THE RECROIDNG.

ENGLISH
II) ENCODING 1 ENTIRE DISC
1) REPEAT THE SAME PROCEDURES (1) TO (3) AS SIPULATED ABOVE UNTIL THE SYSTEM STARTING
ENCODING OF 1 TRACK.
2) THEN PRESS AGAIN THE “ REC “ BUTTON (25) ONE MORE TIME AND “ RIPPING ALL “ WILL SCROLL ONCE.
3) AFTER COMPLETING OF ENCODING OF TH ENRIRE DISC, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
- THE SYSTEM WILL CREAT A “ AUDIO “ FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
- THE RECORDING FORMAT IS PRESETAT – MP3 BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
- NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
- TO INTERRUPT THE RECRODING, PRESS THE “ CD STOP “ BUTTON (20) DURING RECORD MODE.
- ALWAYS INSERT EITHER ONE TYPE OF MEMORY MEDIA“ USB DRIVE “ OR “SD/MMC CARD “ FOR
ENCODING.
- RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE
USB OR SD/MMC CARD
III) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR
SD/MMC CARD IF PRESS THE “ REC “ BUTTON (25). THE OPERATION PROCEDURES IS SAME AS CD
ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3/WMA
FILE BEING READ.
REMARK:
- THE SYSTEM WILL CREAT A “ FCOPY “ FOLDER AND THEN STORE ALL COPIED TRACK IN IT.
- IF PRESS THE “ REC “ BUTTON (25) DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
FROM USB TO SD OR SD TO USB.
- COPYING WILL BE COMPLETED ONLY ENTIRE SONG BEING COPY, IF TERMINATE THE COPY PROCESS
INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE USB OR SD/MMC
CARD
B) CASSETE ENCODING
1) SET THE FUNCTION BUTTON (14) TO “ TAPE “ MODE AND THEN PRESS THE “ REC “ BUTTON (25)
DIRECTLY.
2) THE LCD DISPLAY (2) WITH SHOW THE WORD “ USB “ OR “ CARD “ AND “ “ & FLASHING, NOW THE
SYSTEM IS STARTING THE ENCODING MODE.
3) START PLAYBACK OF CASSETTE TAPE WHICH THE TRACK YOU PREPARE TO RECORD.
4) AFTER FINISH OF RECODING, PRESS THE CD STOP BUTTON (20) UNTIL THE LCD STOP FLASHING AND
RETURN TO “ TAPE “ MODE.
C) PHONO ENCODING
1) PRESS THE FUNCTION BUTTON (14) TO “ PHONO “ MODE AND THEN PRESS THE “ REC “ BUTTON (25)
DIRECTLY.
2) THE LCD DISPLAY WITH SHOW THE WORD “ USB “ OR “ SD “ AND THEN FLASHING, AND THEN DISPLAY
“ “ & “ “ AND FLASHING AFTER FEW SECONDS. NOW THE SYSTEM IS STARTING THE
ENCODING MODE.
3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORDING..
4) AFTER FINISH OF RECODING, PRESS THE : CD STOP “ BUTTON (20) UNTILTHE LCD STOPFLASHING AND
RETURN TO “ PHONO “ MODE.
D) TRACK SEPARATION (BY REMOTE HANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO TO USB/SD TRACK BY TRACE DURING ENCODING.
EVERYTIME WHEN PRESS THE “TS” BUTTON ONCE AT REMOTE HANDSET DURING ENCODINGFROM PHONO
TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND CONTINUOUS THE RECRODING. THE TEXT
“PHONO” AT LCD DISPLAY WILL FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK
SUCCESSFULLY
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY
FOLLOWING:-
A) SINGLE FILE DELETE (BY REMOTE CONTROL)
1. PRESS “ DELETE “ BUTTON ON REMOTEAND THE LCD DISPLAY (2) WILL SHOW (DEL ---001)
2. PRESS SKIP FORWARD OR SKIP BACKWARD BUTTON (23,24) TO SELECT THE FILE GOING TO
DELETE
3. PRESS THE “ ENTER “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP FORWARD OR
SKIP BACKWARD (23,24)TO SELECT “ YES “ OR “ NO “.
4. PRESS THE “ ENTER “ BUTTON AGAIN TO CONFIRM THE SETTING.
REMARK : PRESS “ STOP ” BUTTON TO EXIT DELETE MODE ANYTIME

ENGLISH
B) ALL FILES DELETE
1. PRESS “ DELETE “ BUTTON 2 TIMES AND THE LCD DISPLAY (2) WILL SHOW (FORMAT)
2. PRESS SKIP FORWARD OR SKIP BACKWARD (23,24) TO SELECT “ Y “ (YES) OR “ N “ (NO).
3. PRESS THE “ ENTER “ BUTTON AGAIN TO CONFIRM THE SETTING.
REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIAOR SD CARD WILL BE DELETED COMPLETELY
AFTER CONFIRMING TO “ YES “ MODE.
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFFTHE POWER OR SWITCH THE FUNCTION MODE TO EITHER
CD, AUX OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR
MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY
EJECT AND YOU CAN REMOVE IT BY HAND.
LISTING TO TAPE
GENERAL OPERATION
STOP / EJECT KEY PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE CASSETTE
DOOR.
FAST FORWARD KEY & PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS
FAST REWIND KEY DIRECTION. PRESS STOP/ FAST REWIND KEYEJECT KEYS WHEN THE CASSETTE
SPOOLS STOP TURNING.
PLAY KEY PRESS TO START PLAYING TAPE.
PAUSE KEY PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME
PLAY.
RECORD KEY PRESS TOGETHER WITH PLAY KEY TO START TAPE RECORDING.
(DECK 1 ONLY)
PLAYBACK
zPRESS “TAPE” BUTTON (14) TO ACTIVE TAPE FUNCTION
zPUT IN THE CASSETTE TAPE.
zPRESS PLAY KEY TOACTIVE PLAYBACK
zADJUST THE VOLUME CONTROL (22) TO THE DESIRED LEVEL.
zUSE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
zPRESS STOP / EJECT KEY WHEN FINISHED.
RECORDING
A. RECORDING FROM TAPE (DECK 2 TO DECK 1)
THIS UNIT ENABLES YOU TO DUPLICATEA PRE-RECORDED TAPE TO ANOTHER TAPE. IT IS PERFORMED
ONLY ONE WAY FROM DECK 2 (PLAYBAK) TO DECK 1 (RECORDING).
DUBBING AT NORMAL SPEED
zPRESS THE “ TAPE ” FUNCTION BUTTON(14) .
zINSETA PRE-RECORDED CASSETTE INTO DECK 2 AND A BLANK CASSETTE TAPE INTO DECK 1.
zPRESS THE “ PAUSE ” KEY AND THEN PRESS THE “ RECORD ” AND “ PLAY ” KEYAT DECK 1.
zPRESS THE “ PLAY ” KEY TO START PLAYBACK AT DECK 2 & THEN PRESS “ PAUSE ” KEY AT DECK 1 TO
START DUBBING.
zPRESS “ PAUSE ” KEY AT DECK 1 & “ STOP ” KEYAT DECK 2 WHEN FINISH.
DUBBING AT HIGH SPEED
THIS UNIT IS QUIPPED WITH AHIGH SPEED DUBBING SYSTEM WHICH CAN SAVE THE TIME FOR DUBBING BY
2/3 WHEN COMPARE TO NORMALSPEED.
zPRESS THE DUBBING BUTTON (7) TO “ HI “ POSITION AND THEN FOLLOW THE SAME PROCEDURES AS
STIPULATED IN “DUBBING AT NORMAL SPEED”.
zWHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED,A CHATTERING SOUND IS BEING
HEARD. TO AVOID THIS, SET THE VOLUME CONTROLTOA MINIMUM LEVEL.
zDO NO PRESS O SELECT THE “ DUBBING ” BUTTON (7) TO HI OR NOR. POSITION DURING DUBBING, THIS
WILL VARY THE SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE.

ENGLISH
B. RECORDING FROM RADIO
zPRESS “ TUNER ” BUTTON (14) TOACTIVE RADIO MODE
zTUNE TO THE DESIRED STATION AND INSERT A BLANK CASSETTE TAPE IN DECK 1.
zPRESS “RECORD” & “PLAY“ KEY TO START RECORDING.
zPRESS “PAUSE” KEYS AND THEN “STOP/EJECT” KEY WHEN FINISH.
¾DURING RECORDING OF AM, BEATING WHISTLE AT SOME RECEPTION STATIONS MAY HAPPEN, THIS IS
NORMAL PHENOMEMON.
C. RECORDING FROM CD/USB/SD
zPRESS THE “CD/USB/SD” FUNCTION BUTTON (14).
zINSERTA BLACK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING.
zPRESS “PAUSE” KEY FIRST AND THEN “RECORD” & “PLAY“ KEY AT CASSETTE. RECORDING FUNCTION IS
NOW ON STAND BY.
zSTART PLAYBACK OF EITHER CD/USB/SD MODE, AND THEN PRESS “PAUSE KEY” AT CASSETTE TO START
RECORDING.
zTO STOP RECORDING, PRESS “STOP” BUTTON (20) ON CD/USB/SD MODE FIRST, THEN PRESS THE
“PAUSE” KEY AND THEN “STOP/EJECT” KEY ON CASSETTE TAPE DECK.
D. RECORDING FROM TURNTABLE
zPRESS “PHONO” BUTTON (14) TO ACTIVE TURNTABLE MODE
zINSERTA BLANK CASSETTE TAPE IN DECK 1.
zPRESS “RECORD” & “PLAY“ KEY TO START RECORDING.
zSELECT THE DESIRE RECORD AND START PLAYBACK
zPRESS “PAUSE” KEYS AND THEN “STOP/EJECT” KEY WHEN FINISH.
MORE FEATURES
A. SLEEP SETTING (BY REMOTE CONTROL)
THE SLEEP FUNCTION ENABLES THE SYSTEM SWITCH TO STANDBY MODE AUTOMATICALLY AT A
PRESENT TIME.
1. PRESS “SLEEP/TIMER” BUTTONAND SLEEP INDICATOR “ZZZ” SHOWN ON THE LCD DISPLAY (2).
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 >70….10
MINUTES.
3. SYSTEM WILL STOP AND GOTO STANDBY MODEAUTOMATICALLYAFTER THE SELECTED TIMING.
4. TO CANCELTHE SLEEP MODE, PRESS “TIMER/SLEEP” BUTTON UNTIL “00” IS DISPLAY .
B. ALARM CLOCK SETTING (BY REMOTE CONTROL)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY MODE OF CD,
TUNER, OR USB/SD.
SET THE SYSTEM AT STANDBY MODE, THEN PRESS AND HOLD THE “ TIMER/ CLK-ADJ ” BUTTON TO ENTER
THE PROGREM MODE:-
1) WAKE UP MODE : PRESS THE SKIP (24) OR SKIP (23) BUTTON , BUT MAKE SURE THE MUSIC
SOURCE HAS BEEN PREPARED (CD – LOAD WITH DISC / TUNER – TURN TO THE
DESIRED RADIO STATION / USB/SD – CONNECT A USB MASS STORAGE DEVICE OR
SD/MMC CARD WITH MUSIC FILE INSIDE). PRESS BUTTON (6) “TIMER/CLK-ADJ” TO
ENTER THE FUNCTION
2.) WAKE UP TIME : PRESS PRE-UP (13) OR PRE DN (11) BUTTON TO SET THE CORRECT HOUR. AND
PRESS THE SKIP (24) OR SKIP (23) BUTTON TO SET THE CORRECT MINUTES
3) PRESS (6) “TIMER/CLK-ADJ“ BUTTON TO STORE THE SETTING AND THE SYSTEM WILL START PLAYING
WHEN REACH THE PRESET TIME.
REMARK
- IF THERE IS NO DISC INSIDE THE SELECTED CD TRAY, THE SYSTEM WILLSELECT THE NEXTAVAILABLE
DISC.
- IF THERE IS NO MUSIC SOURCE BEING DETECTED WHEN THE PRESET TIME IS REACHED, SYSTEM WILL
SELECT TUNER MODE AUTOMATICALLY.
zACTIVE/DE-ACTIVE TIMER FUNCTION
1. TO ACTIVE TIMER FUNCTION, PRESS THE “SLEEP/TIMER” BUTTON ON REMOTE HANDSET UNTIL THE
TIMER INDICATOR “ ” IS APPEAR ON LCD DISPLAY (2).
2. TO CANCEL TIMER FUNCTION, PRESS AGAIN “SLEEP/TIMER” BUTTON UNTIL THE TIMER INDICATOR
“ ” DISAPPEAR.

ENGLISH
C. PRE-SET EQ FUNCTION
THIS UNIT PROVIDES 5 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU CAN
SELECT THE DESIRED EFFECT BY PRESSING THE “ PRESET EQ” BUTTON (19) REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT CLASSIC ROCK POP JAZZ
D. DISPLAY FUNCTION (BY REMOTE HANDSET)
PRESS TO INDICATE VARIOUS INFORMATION OF SYSTEM, EACH STEP SWITCHAS BELOW:-
TRACK PLAYING TIME / RADIO INFO. CLOCK ALARM SETTING INFORMTION
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION (BATTERY NOT PROVIDED)
THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION
BUTTON DESCRIPTION
CD/SD/USB PRESS TO SELECT FUNCTION OF CD/SD/USB RESPRECTIVELY
ON/STANDBY PRESS TO SWITCH SYSTEM ON OR GOES TO STANDBY MODE
TAPE PRESS TO SELECT TAPE FUNCTION
TUNER/BAND PRESS TO SELECT RADIO FUNCTION AND AM/FM BAND SELECTION
PHONO PRESS TO SELECT TURNTABLE FUNCTION

ENGLISH
NUMBER KEY (1 - +10) PRESS TO SELECT THE NUMBER OF CD/USB/SD TRACK DIRECTLY
PRE-DN IN MP3/USB/SD MODE : PRESS TO SKIP DOWN THE FOLDER
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
CLOCK/TIMER MODE : PRESS TO SELECT HOUR GOES DOWN
PRE-UP IN MP3/USB/SD MODE : PRESS TO SKIP UP THE FOLDER
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
CLOCK/TIMER MODE : PRESS TO SELECT HOUSE GOES UP
VOLUME -/+ CONTROL VOLUME UP OR DOWN
PLAY/PAUSE IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO
STOP THE DISC PLAY TEMPORARILY
STOP PRESS TO TERMINATE CD/USB/SD PLAYBACK
SKIP UP/DOWN IN CD MODE : TO SELECT PREVIOUS / NEXT CD TRACK
IN TUNER MODE : PRESS TO STEP UP/DOWN OF FREQUENCY
IN CLOCK/TIMER MODE : PRESS TO SELECT MINUTES GOES UP OR DOWN
OPEN/CLOSE IN CD MODE : PRESS TO OPEN OR CLOSE THE CD DOOR TRAY
ENTER / REC PRESS TO ACTIVE CD ENCODING/MP3 FILE COPY FUNCTION OR CONFIRM
FILE DELETE SELECTION
FM-ST/MONO / DELETE IN TUNER MODE : PRESS TO SELECT FM STEREO OR FM MONO MODE
IN USB/SD MODE : PRESS TO ACTIVE FILE DELETE FUNCTION
TIMER / CLK-ADJ IN STANDBY MODE : PRESS TO ADJUST CLOCK
PRESS TO SET THE ALARM ON/OFF TIME AND ACTIVE/DE-ACTIVE ALARM
FUNCTION
DISC SKIP/RDS MODE IN CD MODE : PRESS TO SELECT DISC 1,2,3 RESPECTIVELY
IN TUNER MODE : PRESS TO SELECT RDS MODE & INFOMRATION ON LCD
REP/RAN / RDS SRC IN CD MODE : PRESS TO ACTIVE REPEAT / RANDOM FUNCTION
IN TUNER MODE : PRESS TO SELECT THE RDS PROGRAM TYPE FOR
SEARCHING
EQ PRESS TO SELECT DIFFERENCE EQ MODE FOR ENJOYMENT
DISPLAY PRESS TO DISPLAY DIFFERENCE INFORMATION OF THE SYSTEM
SLEEP / TIMER PLAY MODE : PRESS TO ACTIVE SLEEP FUNCTION DURING MUSIC PLAY
STANBY MODE : PRESS TO ACTIVE OR DEACTIVE THE ALARM WAKE UP
FUNCTION
TS IN ENCODING MODE: PRESS “TS” FOR TRACK SEPARATION
Technical
Radio frequencies UKW-FM 87,5 – 108MHz
MW-AM 522 – 1620KHz
Power supply AC 230V 50Hz
Power consumption 32 W (working mode)