SOUNDMASTER MCD 5145USB User manual

MCD 5145USB
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS

ENGLISH
ENG 1
LOCATION OF CONTROLS
1)DUSTCOVER 17)CDDOOR
2) LCD DISPLAY 18) USB SOCKET
3) VOLUME UP/DOWN BUTTON 19) 3.5MM HEADPHONE JACK
4) TIMER/CLOCK-ADJUST BUTTON 20) REMOTE SENSOR
5) STANDBY LED INDICATOR 21) PRE-SET EQ BUTTON
6) HIGH SPEED DUBBING BUTTON 22) PLAY/PAUSE
BUTTON
7) POWER ON/STANDBY BUTTON 23) DISC SKIP BUTTON
8) STOP /BAND BUTTON 24) DISC 1, 2, 3 BUTTON
9)MEMORYBUTTON 25) CD DOOR OPEN BUTTON
10) FUNCTION SELECT BUTTON 26) SKIP / TUNING UP BUTTON
11) REPEAT/RANDOM BUTTON 27) MP3 FOLDER / PRE-UP BUTTON
12) SKIP / TUNING DOWN BUTTON 28) CASSETTE DOOR (2)
13) MP3 FOLDER/ PRE-DN BUTTON 29) DECK 2 CONTROL KEYS
14) USB/SD RECORDING BUTTON 30) SD/MMC CARD SLOT
15) CASSETTE DOOR (1) 31) SPINDLE ADAPTOR
16) DECK (1) BUTTONS 32) 33/45/78 RPM SPEED SELECTOR
RECORD KEY 33) PICK-UP HOLDER
PLAYBACK KEY 34) SPEAKER WIRE TERMINAL
REWIND KEY 35) AUTO STOP SWITCH
FAST FORWARD KEY 36) 75 OHM FM SOCKET
STO/EJECT KEY 37) AC LINE CORD
PAUSE KEY
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOTBE ADJUSTED OR REPAIRED BYANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.
IMPORTANT:
SINCE MOVEMENT OF THE CD MECHANISM AND THE SENSITIVE CIRCUITY MAY CAUSE INTERFERENCE TO
THE RADIO TUNER NEARBY, SWITCH THIS UNIT OFF WHILE OPERATING OTHER RADIO DEVICES.
DUE TO THE COMPLEXITY OF MUC CONTROL, PLEASE UN-PLUG THE MAIN POWER SUPPLY OF
THE UNIT IF FOUND THE UNIT HANG UP DURING OPERATION!
THIS IS NOT A MALFUNCTION OF THE SYSTEM!

ENGLISH
ENG 2
PRECAUTIONS FOR USE
INSTALLATION
•UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAIN VOLTAGE AND BEFORE ALL
OTHER CONNECTIONS HAVE BEEN MADE.
•DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD (37) TOAC OUTLET.
2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILLGO INTO STANDBY MODE.
3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL (34) LOCATED ON THE REAR SIDE OF THE
UNIT.
4. TURN ON THE POWER (7) AND SELECT “CD“ FUNCTION BY PRESSING “ FUNCTION “ BUTTON (10) . IF THE
LCD DISPLAY (2) IS ON WITH BACKLIGHTING, IT MEANS THE POWER SUPPLY IS NORMAL. NOW THE
SYSTEM IS READY TO PLAY THE MUSIC.
SETTING THE CLOCK
1. SET UNIT IN STANDBY MODE.
2. PRESS THE “TIMER/CLK-ADJ” BUTTON (4), THE DISPLAY Will SHOW “ 12H “ OR “ 24H “, THEN PRESS THE
PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SELECT THE APPROPIATED HOUR FORMAT (12 HOUR
OR 24 HOUR). PRESS THE “TIMER/CLK-ADJ” BUTTON (4) TO CONFIRM.
3. PRESS PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SET THE CORRECT HOUR.
4. PRESS THE SKIP DOWN (12) OR SKIP UP (26) BUTTON TO SET THE CORRECT MINUTES.
5. PRESS ”TIMER/CLK-ADJ” BUTTON (4)TO STORE THE CORRECT HOUR.
¾THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER
SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS FUNCTION BUTTON (10) TO SELECT “ TUNER “ MODE
2. PRESS “ STOP /BAND ” BUTTON (8)AND SELECT THE DESIRED BAND (MW (AM) OR FM).
3. TUNE TO THE REQUIRED STATION BY PRESSING THE “ SKIP / TUNING UP (26) OR DOWN (12)
BUTTON.
4. ADJUST VOLUME UP/DOWN CONTROLS (3) TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1. PRESS FUNCTION BUTTON (10) TO SELECT “ TUNER “ MODE
2. PRESS “ STOP /BAND ” BUTTON (8) AND SELECT THE DESIRED BAND (MW (AM) OR FM).
3. PRESS AND HOLD THE “ SKIP / TUNING UP (26) OR DOWN (12) BUTTON FOR 1-2 SECONDS AND
THEN RELEASE
4. THE UNIT WILL START SEEKINGAUTOMATICALLYAND STOP UNTILA RADIO STATION IS REACHED.
5. REPEAT STEP 3 & 4 UNTILTHE DESIRED RADIO STATION IS BEING REACHED.
6. ADJUST VOLUME UP/DOWN CONTROLS (3) TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 40 RADIO STATIONS (30 FM,10AM) IN THE MEMORY.
1. SET TO “ TUNER “ MODE
2. TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.
3. PRESS “ MEMORY ” BUTTON (9) TO ENABLE PROGRAM STATE.
4. PRESS “ PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SELECT THE DESIRED STATION MEMORY
FOR STORAGE.
5. PRESS “MEMORY ” BUTTON (9)AGAIN TO CONFIRM THE SETTING.
6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7. PRESS “ PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SELECT THE PRESET STATIONS IN ORDER.
8. TO RETURN NORMALTUNER MODE, LEAVE KEYS FREE.
¾THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
¾THERE ARE 5 SECONDS FOR PROGRAM STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO
NORMAL TUNER MODE AUTOMATICALLY.
¾YOU CAN OVERWRITEA PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.

ENGLISH
ENG 3
RADIO DATA SYSTEM (RDS)
THIS IS THE FEATURES TO DISPLAY THE INFROMATION WHICH RELEASED FROM THE RADIO BROADCASE:-
RDS MODE : PRESS AND HOLD TO ACTIVE THE RDS FUNCTION AND THE PROGRAM SERVICE STATION NAME
(PS) IS BEING DISPLAYED.
RDS SEARCH : PRESS TO SELECT THE PROGRAM TYPE YOU WANT TO LISTEN, THEN PRESS THE TUNING +/-
BUTTON TO START RDS SEARCHING AND THE UNIT CAN AUTOMATICALLY DETECT A SUITABLE STATION,
WHICH IS CURRENTLY BROADCASTING WITH PROGRAM TYPE IDENTIFICATION (PTY) SIGNAL.
REMARK : NO “ PS “ NOR “ PTY “APPEARS IF NO SIGNAL IS SENT.
PROGRAMMES ARE CLASSIFIED AS FOLLOWS:
NEWS, AFFAIRS (current affairs), INFO (information), SPORT EDUCATE (education), DRAMA, CULTURE, SCIENCE,
VARIED, POP M (pop music), ROCK M (rock music), MOR M (middle of the road music), LIGHT M (light classical),
CLASSICS (serious classical), OTHER M (other music).
NOTES
PROGRAMME SERVICE STATION NAME (PS)
THIS IS A NAME CONSISTING OF LESS THAN 8 ALPHANUMERIC CHARACTERS, WHICH IS DISPLAYED IN
ORDER TO INFORM LISTENERS ABOUT THE PROGRAMME SERVICE BEING BROADCASTBY THE RADIO
STATION. EXAMPLE: BBC 1
PROGRAMME TYPE IDENTIFICATION (PTY)
PTYALLOWS SELECTION BY ONE OF THE PROGRAMME TYPES RATHER THAN BYA STATION.
RADIO TEXT (TEXT)
INFORMATION SUCH AS THE CAST LIST OF A PLAY OR THE TITLE OFA SONG IS SHOWN ON THE DISPLAY.
CLOCK-TIMER (CT)
CT FUNCTION PROVIDES AN ACCURATE CLOCK SIGNAL.
IF THE CLOCK OF THE SYSTEM IS NOT ADJUSTED AFTER PLUG IN, WHEN A RDS CLOCK IS RECEIVED, THE
SYSTEM WILL AUTOMATICALLY UPDATE THE SYSTEM CLOCK TO THE RECEIVED RDS CLOCK TIME. THE
SYSTEM CLOCK IS NOW ADJUSTED.
FM & FM-STEREO RECEPTION (BY REMOTE HANDSET)
zPRESS THE “ FM-ST/MONO ” BUTTON AT REMOTE HANDSET REPEATEDLY, THE FM PROGRAMS ARE
RECEIVING IN MONO AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN STEREO SIGNALS ARE
WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
zIF STEREO SIGNAL IS BEING RECEIVED, THE “ST” INDICATOR “ ” WILL APPEAR ON LCD (2) TO
SHOW FM STEREO PROGRAM IS NOW RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM : THE RECEIVER HAS A BUILD-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHT ROTATE OR
RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
- FM : CONNECT THE FM SOCKET (36) VIAA 75 OHM CABEL (NOT PROVIDED) FOR THE BEST RECEPTION.
PHONO
NOTED:
-REMOVE THE STYLUS PROTECTOR.
-BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.
1. SELECT TO “ PHONO ” MODE FROM FUNCTION SELECTOR (10)
2. SET THE SPEED SELECTOR (32) TO THE PROPER POSITION DEPENDING ON THE TYPE OF RECORD TO
BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR (31) IF
REQUIRED).
4. LIFT THE TONE ARM FROM THE REST (33) AND SLOWLY MOVE IT TO THE RECORD
SIDE. THE PLATTER WILL START TO ROTATE.
5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
6. ADJUST THE VOLUME UP/DOWN BUTTON (3) TO THE DESIRED LEVEL.
7. AT THE END OF RECORD, THE PLATTER WILLAUTOMATICALLY STOP ROTATING. LIFT

ENGLISH
ENG 4
THE TONEARM FROM THE RECORDAND RETURN IT TO THE REST POSITION (33).
8. TO STOP MANUALLY, LIFT UP THE TONEARM FROM THE RECORDAND RETURN IT TO THE REST (33).
REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (35) TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH (35) TO “ ON “ POSITION TO
STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION (33).
PLAYING COMPACT DISC
zGETTING START
1. SELECT “ CD ” MODE FROM FUNCTION SELECTOR (10)
2. PRESS “OPEN/CLOSE” BUTTON (25) TO OPEN THE CD DOOR.
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY.
4. PRESS THE “ “ BUTTON (23) TO TURNING THE CD TRAY, AND LOADING OUT THE OTHER DISC
COMPARMENT.
5. PRESS THE “OPEN/CLOSE” BUTTON (25) TO CLOSE THE CD DOOR AFTER PLACING ALL DISCS INSIDE.
6. CD SEARCH IS PERFORMING, THE LCD DISPLY (2) WILLSHOW THE TOTALNUMBER OF DISC, NUMBER OF
TRACKS & PLAYING TIME OF DISC.
NOTED : CD SEARCHING WILL BE PERFORMAED EVERYTIME WHEN SWITCHING TO CD MODE OR CLOSING
THE CD DOOR. ALL CD FUNCTIONS WILL BE RESPONSED ONLY AFTER THE CD READING IS COMPLETED.
zPLAY / PAUSE MODE
1. SYSTEM WILL START PLAYBCK AUTOMATICALLY OR PRESS THE “ PLAY/PAUSE ” BUTTON (22) TO
START PLAYBACK, THE FIRST TRACK OF THE FIRST DISC WILL BE PLAYED AND THE PLAYBACK
INFORMATION WILLAPPEAR ON THE LCD DISPLAY (2).
2. OR PRESS EITHER THE “ DISC 1 ” , “ DISC 2 ” , “ DISC 3 ” BUTTON (24), UNIT WILL PLAY THE DISC INSIDE
THE DESIRE TRAY DIRECTLY.
3. TO INTERRUPT, PRESS THE “ PLAY/PAUSE ” BUTTON (22) ONCE AND THE INFORMATION ON LCD
DISPLAY (2) WILL START FLASHING. PRESS AGAIN TO RELEASE & RESUME NORMAL PLAYBACK.
REMARK : THE CD TRAY WILL OPEN IF PRESS “ CD DOOR “ OPEN BUTTON (25) DURING PLAYABCK. THIS
ALLOW TO CHANGE/TAKE OUT THE OTHER TWO CDs WITHOUT INTERRUPT THE MUSIC PLAYBACK.
zSTOP MODE
1. IF “ STOP /BAND ” BUTTON (8) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO
STOP MODE.
zSKIP MODE (SKIP UP /SKIP DOWN )
1. DURING PLAY OR PAUSE MODE, IF “ SKIP UP ” BUTTON (26) IS PRESSED IT WILL GO TO NEXT TRACK
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “ SKIP DOWN ” BUTTON (12) IS PRESSED. ITWILLGO BACK TO THE
BEGINNING OF THE TRACK, ORIGIANLTRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS “ SKIP DOWN ” BUTTON (12) AGAIN, IT WILL GO TO THE PREVIOUS TRACK
AND REMAIN THE PLAY OR PAUSE MODE.
zSEARCH MODE (SEARCH UP /SEARCH DOWN )
1. DURING PLAY MODE, IF “ SKIP UP ” BUTTON (26) IS PRESSED & HOLD FOR FEW SECONDS, IT WILL
START SEARCHING FORWARD.
2. DURING PLAY MODE, IF “ SKIP DOWN ” BUTTON (12) IS PRESSED & HOLD FOR FEW SECONDS. IT
WILL STAR SEARCHING BACKWARDS.
zFOR MP3 DISC
1. AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND FOLDER WILL BE SHOWN
ON THE LCD DISPLAY (2).
2. PRESS “ PRE-UP “ (27) OR “PRE-DOWN “ (13) BUTTON TO SELECT THE FOLDER NUMBER.
3. PRESS “ SKIP UP “ (26) OR SKIP DOWN (12) BUTTON TO SELECT THE TRACK NUMBER.
4. WHEN THE DESIRED TRACK AND FOLDER IS BEING SELECTED, PRESS THE “ PLAY/PAUSE ”
BUTTON (22) TO START PLAYBACK.

ENGLISH
ENG 5
ID3 (TRACK TITLE/ALBUM/ARTIST) FUNCTION (BY REMOTE HANDSET)
PRESS THE “ DISPLAY “ BUTTON REPEATLY DURING PLAYBACK OF MP3/WMADISC, THE SONG TITLE / ALBUM
NAME / ARTIST NAME IS BEING DISPLAYED IN ORDER. THE LCD DISPLAY (2) WILL RESUME TO NORMAL
PLAYBACK INFORMATION IF LEAVE KEY FREE.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NO TITLE “ OR “ NO ALBUM “ OR “ NO
ARTIST “IS BEING DISPLAYED” ON DISPLAY (2).
-NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MEMORY CARD IS
NOT SUPPORTING BY THE SYSTEM
-THE SYSTEM SUPPORT ONLY ENGLISH AND ARABIC NUMBER FOR ID3 FUNCTION
MP3 TRACK FORMAT REQUIREMENT:-
- BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44.1KHZ AND 48 KHZ DECODABLE
- THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
zREPEAT/RANDOM MODE
PRESS THE REPEAT/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE DISC OR
ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
FOR CD/MP3 DISC
(4) RANDOM PLAY (1 DISC) (3) RANDOM + REPEAT (1 DISC)
(5) OFF MODE (1) REPEAT (1 TRACK) (2) REPEAT (1 DISC)
INDICATOR
PLAY MODE ON LCD DISPLAY
REPEAT (1 TRACK)
REPEAT (1 DISC) ALL
REPEAT (1 DISC) + RANDOM RAN + ALL
RANDOM (1 DISC) RAN
OFF MODE --------------
zREPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
zRANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD/MP3 DISC PROGRAMMING
UP TO 40 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
THE“ STOP /BAND ” BUTTON (8)
1. SET IN CD MODE & STOP THE CD PLAYBACK.
2. PRESS THE “ MEMORY BUTTON (9) , “ MEM “ WILLAPPEAR ON LCD DISPLAY (2) & FLASHING. MOREOVER,
IT WILL INDICATE PROGRAM NO.AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP OR DOWN BUTTONS (26,12).
(FOR MP3 DISC, PRESS“ PRE-UP “ (27) OR “PRE-DOWN “ (13) BUTTON TO SELECT THE DESIRE
FOLDER)
4. PRESS THE “ MEMORY ” BUTTON (9) TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “ PLAY/PAUSE ” BUTTON (22)
TO PLAY THE DISC IN ASSIGNED ORDER.
7. PRESS “ STOP / BAND ” BUTTON (8) TO TERMINATE PROGRAM PLAY. PRESS AGAIN “ STOP /
BAND ” BUTTON (8) TO CLEAR ALLMEMORY& THE INDICATOR “ MEM “ DISAPPEAR FROM LCD DISPLAY (2)
¾AFTER PROGRAM COMPLETE, PRESS “ SKIP UP OR DOWN BUTTONS (26,12) TO REVIEW THE
TRACKS BEING PROGRAMMED. PRESS “ CD STOP “ BUTTON (20) TO EXIT REVIEW MODE.
¾THE PROGRAMMING FUNCTION ALLOW TO PROGRM 1 ENTIRE DISC ONLY.

ENGLISH
ENG 6
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODEAND PLAYBACK ALL MP3 FILE WHICH STORED IN THE MEMORY MEDIA
WITH USB CONNECTING PORT, MULTI- MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.
1. PRESS FUNCTION BUTTON (10) REPEATEDLY TO SELECT “ USB ” OR
“ SD CARD “ MODE.
2. PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT
GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE
DIRECTION OF THE SYMBOL WHICH NEXT TO THE SD CARD SLOT.
INSERT STRAIGHT WITHOUT BENDING.
zCONNECTING THE USB / MEMORY CARD UPSIDE DOWN OR
BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE
STORAGE MEDIA (USB / MEMORY CARD). CHECK TO BE SURE THE
DIRECTION IS CORRECT BEFORE CONNECTION.
3. THE SYSTEM WILL START READING THE STORAGE MEDIAAUTOMATICALLY AFTER CONNECTING, AND
LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL NUMBER OF ALBUM
BEING DETECTED.
4. REPEAT THE SAME PLAYBACK PROCEDUREAS PLAYING CD/MP3 DISC AS ABOVE
REMARK
- THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMAFORMAT ONLY THOUGH THE USB
PORT/MEMORY CARD SLOT.
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT THE MALFUNCTION OF THE SYSTEM.
- USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED
FOR COMMUNICATION WITH COMPUTER DIRECTLY.
ENCODING OF CD FILE INTO MP3 FILE
THE SYSTEM IS ABLE TO ENCODE NORMALCD/PHONE/TAPE TO MP3 FORMATAND RECORDING AT MEMORY
MEDIA WITH USB CONNECTING PORT, MULTI- MEDIA CARD (MMC) OR SECURE DIGITAL (SD) MEMORY CARD.
A) CD ENCODING
I) ECNODING 1 TRACK
1. PERFORM NORMAL PLAYBACK OF THE CD TRACK YOU WANT TO ENCODE & RECORD,
2. PRESS “
REC “ BUTTON (14) DURING THE PLAYBACK OF THE DESIRE TRACK, UNIT WILLDISPLAY “ USB
“ OR “ CARD “ & FLASHING. (IF BOTH SORUCE ARE READY DURING RECRODING). THEN PRESS “ SKIP
UP ”OR “ DOWN “ BUTTONS (26,12) TO SELECT AND THEN PRESS “ REC “ BUTTON (14) TO
CONFIRM.
3. THE SYSTEM WILLSHOW “USB” OR “CARD” & “ “ AND FLASHING. ENCODING IS PERFORMING NOW.
4. PRESS “ STOP /BAND ” BUTTON (8) TO TERMINATE THE RECROIDNG.
II) ENCODING 1 ENTIRE DISC
1) REPEAT THE SAME PROCEDURES (1) TO (3) AS SIPULATEDABOVE UNTIL THE SYSTEM STARTING
ENCODING OF 1 TRACK.
2) THEN PRESS AGAIN THE “ REC “ BUTTON (14) ONE MORE TIME AND “ REC ALL “ WILLSHOW ONCE ON
LCD DISPLAY (2)
3) AFTER COMPLETING OF ENCODING OF TH ENTIRE DISC, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE CD TRACK
- THE SYSTEM WILL CREAT A “ AUDIO “ FOLDER AND THEN STORE THE ENCODING TRACK IN IT.
- THE RECORDING FORMAT IS PRESETAT – MP3 BIT RATE : 128 KBPS, SAMPLING RATE : 44.1KHZ
- NO SONG TITLE/ALABUM NAME/ARTIS NAME WILL BE RECORDED DURING ENCODING MODE
- TO INTERRUPT THE RECRODING, PRESS THE “ STOP /BAND ” BUTTON (8) DURING RECORD MODE.
- ALWAYS INSERT EITHER ONE TYPE OF MEMORY MEDIA“ USB PEN-DRIVE “ OR “SD/MMC CARD “ FOR
ENCODING.
- RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF TERMINATE THE
ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE
USB OR SD/MMC CARD
III) COPYING OF MP3/WMA FILE
IF PUTTINGA MP3/WMA DISC INSTEAD OFA CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR
SD/MMC CARD IF PRESS THE “ REC “ BUTTON (14). THE OPERATION PROCEDURES IS SAME AS CD
ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILLSWITCH TO COPYING MODE ONLY IF MP3/WMA
FILE BEING READ.

ENGLISH
ENG 7
REMARK:
- THE SYSTEM WILL CREAT A“ FCOPY “ FOLDERAND THEN STOREALL COPIED TRACK IN IT.
- IF PRESS THE “ REC “ BUTTON (14) DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
FROM USB TO SD OR SD TO USB.
- COPYING WILL BE COMPLETED ONLY ENTIRE SONG BEING COPY, IF TERMINATE THE COPY PROCESS
INTERMEDIATELY, THERE IS NO TRACK BEING RECORDED NOR STORED TO THE USB OR SD/MMC
CARD
B) CASSETE ENCODING
1) SELECT TO “ TAPE ” MODE FROM FUNCTION SELECTOR (10) AND THEN PRESS THE “ REC “ BUTTON
(14) DIRECTLY.
2) THE LCD DISPLAY (2) WITH SHOW THE WORD “ USB “ OR “ CARD “ AND “ “ & FLASHING, NOW THE
SYSTEM IS STARTING THE ENCODING MODE.
3) START PLAYBACK OF THE CASSETTE TAPE WHICH THE TRACK YOU PREPARE TO RECORD.
4) AFTER FINISH OF RECODING, PRESS THE “ STOP /BAND ” BUTTON (8) UNTILTHE TEXT ON LCD (2)
STOP FLASHING AND RETURN TO “ TAPE “ MODE.
C) PHONO ENCODING
1) PRESS THE FUNCTION BUTTON (14) TO “ PHONO “ MODE AND THEN PRESS THE “ REC “ BUTTON (25)
DIRECTLY.
2) THE LCD DISPLAY WITH SHOW THE WORD “ USB “ OR “ SD “ AND THEN FLASHING, AND THEN DISPLAY
“ “ & “ “ AND FLASHING AFTER FEW SECONDS. NOW THE SYSTEM IS STARTING THE
ENCODING MODE.
3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORDING..
4) AFTER FINISH OF RECODING, PRESS THE : CD STOP “ BUTTON (20) UNTIL THE LCD STOP FLASHING AND
RETURN TO “ PHONO “ MODE.
TRACKSEPARATION(BYREMOTEHANDSET)
YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO OR TAPE TO USB/SD TRACK BY TRACE DURING
ENCODING. EVERY TIME WHEN PRESS THE “ “ (TRACK SEPARATION) BUTTON ONCE AT REMOTE
HANDSET DURING ENCODING FROM PHONO OR TAPE TO USB/SD, THE SYSTEM WILL GENERATE A NEW
TRACK AND CONTINUOUS THE RECRODING. THE TEXT “ PHONO “ OR “ TAPE “ AT LCD DISPLAY (2) WILL
FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY
FOLLOWING:-
SINGLE FILE DELETE (BY REMOTE CONTROL)
1 PRESS “ DELETE “ BUTTON ON REMOTEAND THE LCD DISPLAY (2) WILL SHOW (DELETE TRACK---001)
2 PRESS “ SKIP UP ”OR “ DOWN “ BUTTONS (26,12) TO SELECT THE FILE GOING TO DELETE
3 PRESS THE “ DELETE “ BUTTON AGAIN TO CONFIRM THE DELECTION..
REMARK : PRESS “ STOP /BAND ” BUTTON (8) TO EXIT DELETE MODE ANYTIME
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD,TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER
CD, AUX OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR
MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY
EJECT AND YOU CAN REMOVE IT BY HAND.
LISTING TO TAPE
GENERAL OPERATION
STOP / EJECT KEY PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE CASSETTE
DOOR.
FAST FORWARD KEY & PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS
FAST REWIND KEY DIRECTION. PRESS STOP/ FAST REWIND KEYEJECT KEYS WHENTHE CASSETTE
SPOOLS STOP TURNING.
PLAY KEY PRESS TO START PLAYING TAPE.
PAUSE KEY PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME
PLAY.

ENGLISH
ENG 8
RECORD KEY PRESS TOGETHER WITH PLAY KEY TO START TAPE RECORDING.
(DECK 1 ONLY)
PLAYBACK
zSELECT “ TAPE ” MODE FROM FUNCTION SELECTOR (10)
zPUT IN THE CASSETTE TAPE.
zPRESS PLAY KEY TO ACTIVE PLAYBACK
zADJUST THE VOLUME UP/DOWN CONTROL (3) TO THE DESIRED LEVEL.
zUSE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
zPRESS STOP / EJECT KEY WHEN FINISHED.
RECORDING
A. RECORDING FROM TAPE (DECK 2 TO DECK 1)
THIS UNIT ENABLES YOU TO DUPLICATEA PRE-RECORDED TAPE TOANOTHER TAPE. IT IS PERFORMED
ONLY ONE WAY FROM DECK 2 (PLAYBAK) TO DECK 1 (RECORDING).
DUBBING AT NORMAL SPEED
zSELECT “ TAPE ” MODE FROM FUNCTION SELECTOR (10) AND THEN SET THE DUBBING BUTTON (6) AT
“ NOR. “ POSITION
zINSETA PRE-RECORDED CASSETTE INTO DECK 2 AND A BLANK CASSETTE TAPE INTO DECK 1.
zPRESS THE “ PAUSE ” KEY AND THEN PRESS THE “ RECORD ” AND “ PLAY ” KEYAT DECK 1.
zPRESS THE “ PLAY ” KEY TO START PLAYBACKAT DECK 2 & THEN RELEASE “ PAUSE ” KEYAT DECK
1 TO START DUBBING.
zPRESS “ PAUSE ” KEY AT DECK 1 & “ STOP ” KEYAT DECK 2 WHEN FINISH.
DUBBING AT HIGH SPEED
THIS UNIT IS QUIPPED WITH A HIGH SPEED DUBBING SYSTEM WHICH CAN SAVE THE TIME FOR DUBBING BY
2/3 WHEN COMPARE TO NORMALSPEED.
zPRESS THE DUBBING BUTTON (6) TO “ HI “ POSITIONAND THEN FOLLOW THE SAME PROCEDURES
AS STIPULATED IN “DUBBING AT NORMAL SPEED”.
zWHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED,A CHATTERING SOUND IS BEING
HEARD. TO AVOID THIS, SET THE VOLUME CONTROLTO A MINIMUM LEVEL.
zDO NO PRESS O SELECT THE “ DUBBING ” BUTTON (6) TO HI OR NOR. POSITION DURING DUBBING, THIS
WILL VARY THE SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE.
B. RECORDING FROM RADIO
zSELECT “ TUNER ” MODE FROM FUNCTION SELECTOR (10)
zTUNE TO THE DESIRED STATION AND INSERTABLANK CASSETTE TAPE IN DECK 1.
zPRESS “ RECORD ” & “PLAY “ KEY TO START RECORDING.
zPRESS “ PAUSE ” KEYS AND THEN “ STOP/EJECT ” KEY WHEN FINISH.
¾DURING RECORDING OF AM, BEATING WHISTLE AT SOME RECEPTION STATIONS MAY HAPPEN, THIS IS
NORMAL PHENOMEMON.
C. RECORDING FROM CD/USB/SD
zSELECT “ CD/USB/SD ” MODE FROM FUNCTION SELECTOR (10).
zINSERTA BLACK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING.
zPRESS “ PAUSE ” KEY FIRST AND THEN “RECORD ” & “ PLAY “ KEY AT CASSETTE. RECORDING
FUNCTION IS NOW ON STAND BY.
zSTART PLAYBACK OF EITHER CD/USB/SD MODE, AND THEN PRESS “PAUSE KEY ” AT CASSETTE TO
START RECORDING.
zTO STOPRECORDING, PRESS “ STOP /BAND ” BUTTON (8) ON CD/USB/SD MODE FIRST, THEN PRESS
THE “ PAUSE ” KEY AND THEN “STOP/EJECT ” KEY ON CASSETTE TAPE DECK.
D. RECORDING FROM TURNTABLE
zSELECT “ PHONO ” MODE FROM FUNCTION SELECTOR (10).
zINSERTA BLANK CASSETTE TAPE IN DECK 1.
zPRESS “RECORD ” & “ PLAY “ KEY TO START RECORDING.
zSELECT THE DESIRE RECORD AND START PLAYBACK
zPRESS “ PAUSE ” KEYS AND THEN “ STOP/EJECT ” KEY WHEN FINISH.
MORE FEATURES
A. SLEEP SETTING (BY REMOTE CONTROL)
THE SLEEP FUNCTION ENABLES THE SYSTEM SWITCH TO STANDBY MODE AUTOMATICALLY AT A
PRESENT TIME.
1. PRESS “SLEEP/TIMER” BUTTONAND SLEEP INDICATOR “ZZZ” SHOWN ON THE LCD DISPLAY (2).
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF SLP 90 > 75 >60 > 45 > 30
> 15 MINUTES.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.

ENGLISH
ENG 9
4. TO CANCELTHE SLEEP MODE, PRESS “TIMER/SLEEP” BUTTON UNTIL“ OFF ” IS DISPLAY ON LCD (2) & THE
“ZZZ” INDICATOR DISAPPEAR.
B. ALARM CLOCK SETTING
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY MODE OF CD,
TUNER, OR USB/SD.
SET THE SYSTEM AT STANDBY MODE, THEN PRESS AND HOLD THE “ TIMER/CLK-ADJ ” BUTTON (3)TO ENTER
THE PROGREM MODE:-
1) WAKE UP MODE : PRESS THE SKIP DOWN (12) OR SKIP UP (26) BUTTON TO SELECT CD/USB/SD
OR TUNER MODE RESPECTIVELY, BUT MAKE SURE THE MUSIC SOURCE HAS BEEN
PREPARED (CD – LOAD WITH DISC / TUNER – TURN TO THE DESIRED RADIO STATION /
USB/SD – CONNECT A USB MASS STORAGE DEVICE OR SD/MMC CARD WITH MUSIC
FILE INSIDE)
2) PRESS “TIMER/CLK-ADJ” BUTTON (3) TO CONFIRM THE SELECTED WAKE UP MODE!
3) WAKE UP TIME: PRESS PRE-UP (27) OR PRE-DOWN (13) BUTTON TO SET THE CORRECT HOUR.
AND SKIP DOWN (12) OR SKIP UP (26) BUTTON TO SET THE CORRECT
MINUTES
4) PRESS “ TIMER/CLK-ADJ “ BUTTON (3)TO STORE THE SETTING AND THE SYSTEM WILL
START PLAYING WHEN REACH THE PRESET TIME.
REMARK
5) IF THERE IS NO DISC INSIDE THE SELECTED CD TRAY, THE SYSTEM WILL SELECT THE NEXT
AVAILABLE DISC.
6) IF THERE IS NO MUSIC SOURCE BEING DETECTED WHEN THE PRESET TIME IS REACHED, SYSTEM
WILL SELECT TUNER MODE AUTOMATICALLY.
zACTIVE/DE-ACTIVE TIMER FUNCTION (BY REMOTE CONTROL)
1. TO ACTIVE TIMER FUNCTION, PRESS THE “SLEEP/TIMER” BUTTON ON REMOTE HANDSET UNTIL THE
TIMER INDICATOR “ ” IS APPEAR ON LCD DISPLAY (2).
2. TO CANCEL TIMER FUNCTION, PRESS AGAIN “SLEEP/TIMER” BUTTON UNTIL THE TIMER INDICATOR
“ ” DISAPPEAR.
C. PRE-SET EQ FUNCTION
THIS UNIT PROVIDES 5 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU CAN
SELECT THE DESIRED EFFECT BY PRESSING THE “ PRESET EQ” BUTTON (19) REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT POP JAZZ ROCK CLASSIC

ENGLISH
ENG 10
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION (BATTERY NOT PROVIDED)
THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION
BUTTON DESCRIPTION
CD/SD/USB PRESS TO SELECT FUNCTION OF CD/SD/USB RESPRECTIVELY
ON/STANDBY PRESS TO SWITCH SYSTEM ON OR GOES TO STANDBY MODE
TAPE PRESS TO SELECT TAPE FUNCTION
TUNER/BAND PRESS TO SELECT RADIO FUNCTION AND AM/FM BAND SELECTION
PHONO PRESS TO SELECT TURNTABLE FUNCTION
NUMBER KEY (0 - 9) PRESS TO SELECT THE NUMBER OF CD/USB/SD TRACK DIRECTLY
PRE-DN IN MP3/USB/SD MODE : PRESS TO SKIP DOWN THE FOLDER
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
CLOCK/TIMER MODE : PRESS TO SELECT HOUR GOES DOWN
PRE-UP IN MP3/USB/SD MODE : PRESS TO SKIP UP THE FOLDER
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
CLOCK/TIMER MODE : PRESS TO SELECT HOUR GOES UP
VOLUME -/+ CONTROL VOLUME UP OR DOWN
PLAY/PAUSE IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO
STOP THE DISC PLAY TEMPORARILY
STOP PRESS TO TERMINATE CD/USB/SD PLAYBACK

ENGLISH
ENG 11
SKIP UP/DOWN IN CD MODE : TO SELECT PREVIOUS / NEXT CD TRACK
IN TUNER MODE : PRESS TO STEP UP/DOWN OF FREQUENCY
IN CLOCK/TIMER MODE : PRESS TO SELECT MINUTES GOES UP OR DOWN
OPEN/CLOSE IN CD MODE : PRESS TO OPEN OR CLOSE THE CD DOOR TRAY
ENTER / REC PRESS TO ACTIVE CD ENCODING/MP3 FILE COPY FUNCTION OR CONFIRM
FILE DELETE SELECTION
FM-ST/MOMO / DELETE IN TUNER MODE : PRESS TO SELECT FM STEREO OR FM MONO MODE
IN USB/SD MODE : PRESS TO ACTIVE FILE DELETE FUNCTION
TIMER / CLK-ADJ IN STANDBY MODE : PRESS TO ADJUST CLOCK
PRESS TO SET THE ALARM ON TIME AND ACTIVE/DE-ACTIVE ALARM
FUNCTION
DISC SKIP/RDS MODE IN CD MODE : PRESS TO SELECT DISC 1,2,3 RESPECTIVELY
IN TUNER MODE : PRESS TO SELECT RDS MODE & INFOMRATION ON LCD
REP/RAN / RDS SRC IN CD MODE : PRESS TO ACTIVE REPEAT / RANDOM FUNCTION
IN TUNER MODE : PRESS TO SELECT THE RDS PROGRAM TYPE FOR
SEARCHING
EQ PRESS TO SELECT DIFFERENCE EQ MODE FOR ENJOYMENT
DISPLAY / PLAYBACK MODE : PRESS TO DISPLAY DIFFERENCE INFORMATION OF THE
(TRACK SEPARATION) SYSTEM
PHONE/TAPE ENCODING MODE : PRESS TO DIVIDE THE RECORDING
TRACK AT TURNTABLE ONE BY ONE DURING ENCODING
SLEEP / TIMER PLAY MODE : PRESS TO ACTIVE SLEEP FUNCTION DURING MUSIC PLAY
STANBY MODE : PRESS TO ACTIVE OR DEACTIVE THE ALARM WAKE UP
FUNCTION AND ENTER TIMER MODE FOR SETTING
SPECIFICATIONS
FM FREQUENCY 87,5 – 108 MHz
AM FREQUENCA 522 – 1620 KHz
POWER SUPPLY AC 230V ~ 50Hz
POWER CONSUMPTION 36W (WORKING)
BATTERY REMOTE 3V 2x UM-4/AAA 1.5V
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.woerlein.com