Southern Enterprises 373661 User manual

373661
GEL FIREPLACE
Assembly Instruction
© Southern Enterprises Inc. All Right Reserved.

G 1PC
Wrench
C 8PCS
Adhesive pad
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
F 4PCS
Allen Bolt 1/4”x1”
GEL FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Screws shown actual size. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below.
12PCS
Big Panel
2 2PCS
Small Panel
3 1PC
Canister Shelf
4 1PC
Fireplace Base
5 1PC
Rooftop
7 2PCS
Short Glass Panel
8 2PC
Left Door
10 4PCS
Fuel Canister holder
11 2PCS
Candle Holder
6 2PCS
l
Long Glass Pane
9 2PC
Right Door
A 12PCS
Allen Bolt 1/4”x1/2”
B 12PCS
Washer
Care and Cleaning Instructions:
Before using , wipe with a clean , dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
373661

373661
GEL FIREPLACE
Assembly Instructions
DANGER
PLEASE USE IN WELL VENTILATED AREA
The fireplace will have open flames and will generate heat.
Make sure to keep all combustible items away from the fireplace when the gel fuel is
burning.
DO NOT touch the fireplace when the gel fuel is burning.
Figure 1
Figure 1Figure 1
Figure 1
Step 1:
Attached small panel (2) to big
panel (1) by using blot (A) and
washer (B) as shown.
B
A
1
2
AB

S
373661
GEL FIREPLACE
Assembly Instruction
Figure 2
Figure 2Figure 2
Figure 2
Figure 3
Figure 3Figure 3
Figure 3
Step 2:
Insert canister shelf (3) to the
frame by using bolt (A) and
washer (B) as shown.
Step 3:
Attach fireplace base (4) to the
frame (1) by using bolt (A) and
washer (B) as shown.
A B 3
BA
BA
4

Figure 4
Figure 4Figure 4
Figure 4
Step 4:
Attach rooftop (5) to the frame
by using bolt (F) as shown.
.
Figure 5
Figure 5Figure 5
Figure 5
Step 5:
Put adhesive pad (C) onto the
corner holder of canister shelf
(3) as shown, then insert glass
panel (6) (7) into the holders
as shown.
F
5
5
C
6
7

Figure 6
Figure 6Figure 6
Figure 6
Step 6:
Insert left door (8) and right
door (9) into the frame as
shown.
Figur
FigurFigur
Figure 7
e 7e 7
e 7
Step 7:
Remove the fuel canister
holders (2, Figure 7) from the
fireplace and install one gel
fuel canister (1, Figure 7) into
each of the holders.
NOTICE
Make sure to remove the gel
fuel canister paper label (4,
Figure 7) before installing the
canister into the holder.
Shake the gel fuel canister
before installing it into the
canister holder.
8
9
Gel fuel D
E
1O
3
4
1
2

Figure 8
Figure 8Figure 8
Figure 8
Step 8:
Install the gel fuel holders into the
fireplace into the appropriate
mounting hole in the fireplace.
Following the instructions on the gel
fuel canister, remove the lid (11,
Figure 8) from the gel fuel canister
(E, Figure 8), and using a long
match, light the fuel in each of the
canister. Candle holder can be used
to extinguish fire.
10
D
E
11

PROLONGED USE OF THE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE TO BECOME
HOT AND POTENTIALLY CAN CAUSE BURNS IF TOUCHED.
DO NOT BURN MORE THAN THREE CANISTERS OF FUEL AT ONE TIME.
BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED FROM EACH OF
THE GEL FUEL CANISTERS.
USE LONG MATCHES TO LIGHT EACH CANISTER OF FUEL.
DO NOT TOUCH THE CANISTERS WITH BARE HANDS UNTIL THE FLAME HAS BEEN EXTINGUISHED
FOR 20 MINUTES.
DO NOT BURN ANYTHING EXCEPT THE SPECIFIED CANISTERS OF GEL FUEL IN THE FIREBOX.
KEEP CHILDREN AWAY FROM THE FIREPLACE WHEN IN USE.
KEEP FLAMABLE OBJECTS, SUCH AS CURTAINS OR DRAPERYS, AWAY FROM THE FIREPLACE WHEN
THE GEL FUEL HAS BEEN IGNITED.
MAKE SURE THE CUSTOMER DOES NOT PLACE ANY DECORATIVE ITEMS ON TOP OF THE UNIT AT
ANYTIME.
DO NOT TOUCH THE UPPER PART OF THE UNIT WHILE IT IS STILL IN OPERATION.
THE CANDLE HOLDER ACTS AS A COVER TO PUT OUT FIRE IF ONE WISHES TO STOP THE FLAME.
NEVER LEAVE BURNING GEL FUEL UNATTENDED.
CARE INSTRUCTION: WIPE DOWN UNIT AND CANDLE HOLDER WITH SOFT DAMP CLOTH.
WHEN USING THE CANDLE HOLDER PLEASE MAKE SURE THAT THE CANNISTER HOLDERS ARE IN
PLACE.
DANGER
11

We'd love to hear from you! Email us photos of our products in your home at s[email protected] and we
might feature it on our site or use it to model one of our inspirational photos.
“PARTS WILL BE SENT IF AVAILABLE FROM SEI” “THIS IS NOT A WARRANTY”
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to divide
parts and label them to correspond with part list. Extra hardware may be included. If any items are missing, please
contact Southern Enterprises at 800-633-5096 or in Dallas [phone]/ 9am – 4pm Mon-Fri Central time if you
have product issues with your purchase. Please ask for a customer service representative for issues involving
damages or replacement parts. Please ask for a technical assistance representative for any issues with product
assembly and product construction. Please contact the retailer that you purchased from for returns.
Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts. We do not
recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If
this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to
provide parts or replacements merchandise. Parts will not be available for items arriving fully assembled.