Southern Enterprises Tennyson FA8545ARTX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
1
Tennyson Fireplace
FA8545ARTX- Classic Espresso
Assembly Instructions

PACKAGE CONTENTS
PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY
1 Top Panel 1 8 Back Panel (L/R) 2
2 Base 1 9 Upper Cross Brace 1
3 Left Front Panel 1 10 Lower Cross Brace 1
4 Right Front Panel 1 11 Front Rail 1
5 Middle Front Panel
1
12 Back Rail 1
6 Left Side Panel 1 13 Wood Connecter 2
7 Right Side Panel 1 14 Wood Holder 2
15 Firebox
(shipped in a separate carton) 1
2
15

HARDWARE CONTENTS
3
Cam Bolt
Qty:
10
Wood Dowel
Qty:40
Cam Lock
Qty:
1
0
Flat Head Long Screw
Qty:
44
A
B
C
D
Phillips screwdriver (not included).

ASSEMBLY INSTRUCTIONS
HARDWARE USED
Cam Bolt x 2
Wood Dowel x 8
Cam Lock x 2
Flat Head Long
Screw x 2
HARDWARE USED
Wood Dowel x 4
Spring Washer x 12
4
1. Insert 2pcs cam bolts (A) and 8pcs wood
dowels (B) into predrilled holes on front and
back rails (11, 12) and fit into corresponding
holes on ends of wood connecter (13). Insert
2pcs cam locks (C) into corresponding holes
on underside of wood connecter (13) with slot
for screwdriver facing outward. Rotate cam
lock (C) clockwise to secure cam bolt (A). Then
insert 2pcs flat head long screws (D) through
predrilled holes on back rail (12) and tighten
into end of wood connecter (13).
2. Insert 4pcs wood dowels (B) into predrilled holes
on left and right side panels (6, 7) and fit into
corresponding holes on left and right front panels
(3, 4). Insert 12pcs flat head long screws (D)
through wood bars on inside of left and right side
panels (6, 7) and tighten into back of left and
right front panels (3, 4).
1
2
D
D

ASSEMBLY INSTRUCTIONS
HARDWARE USED
Cam Bolt x 2
Wood Dowel x 12
Cam Lock x 2
Flat Head Long
Screw x 4
HARDWARE USED
Cam Bolt x 2
Wood Dowel x 6
Cam Lock x 2
5
3. Insert 2pcs cam bolts (A), 12pcs wood dowels (B)
into predrilled holes on edges of left and right front
panels (3, 4), left and right side panels (6, 7) and fit
into corresponding holes on ends of parts (5, 11,
12). Insert 2pcs cam locks (C) into corresponding
holes on back of middle front panel (5) with slot for
screwdriver facing outward. Rotate cam locks (C)
clockwise to secure cam bolts (A). Insert 4pcs flat
head long screws (D) through predrilled holes on
end of back rail (12) and tighten into corresponding
holes on inside of left and right side panels (6, 7).
4. Insert 2pcs cam bolts (A) and 6pcs wood dowels
(B) into predrilled holes on upside of base (2) and
fit into corresponding holes on bottom edges of
the assembled unit. Insert 2pcs cam locks (C) into
corresponding holes on inside of left and right
side panels (6, 7) with slot for screwdriver facing
outward. Rotate cam locks (C) clockwise to
secure cam bolts (A).
3
4
D