Southern Enterprises FA9031A0TX User manual

Page 1
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
FA9031A0TX / FA9031B0TX
Granville Media Fireplace
-Espresso/ Ebony Stain
Assembly Instructions
PO#

Page 2
1 Quantity
of 2
Side Shelf（L/R）
2 Quantity
of 2
Side Rail（L/R）
3 Quantity
of 2
Side Panel（L/R）
4 Quantity
of 2
Upper/Lower Rail
5 Quantity
of 1
Bottom Panel
6 Quantity
of 1
Shelf
7 Quantity
of 2
Upper Partition Panel
(L/R)
8 Quantity
of 1
Top Panel
9 Quantity
of 1
Middle Back Panel
10 Quantity
of 2
Side Back Panel（L/R）
11 Quantity
of 1
Fireplace Pedestal
12 Quantity
of 2
Fixed Bar
13 Quantity
of 1
Firebox
(Shipped In A Separate Carton)
A Quantity
of 36
Cam Bolt
B
Quantity
of 40
Wood Dowel
C
Quantity
of 36
Cam Lock
Granville Media Fireplace- Espresso/ Ebony Stain
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.

Page 3
D Quantity
of 36
Plastic Cover
E Quantity
of 4
Ø1/4*7/8"L
Small Bolt
F Quantity
of 8
Spring Washer
G Quantity
of 8
Flat Washer
H Quantity
of 5
Ø3*12mm
Screw For Back
I Quantity
of 7
Ø5/16”*1”L
Long Flat Head Screw
J Quantity
of 1
Allen
Wrench
k Quantity
of 4
Ø1/4*1-1/8"L
Long Bolt
L Quantity
of 4
Bracket
M Quantity
of 4
Screw For Bracket
N Quantity
of 4
Screw For Wall
O Quantity
of 2
Plastic Strap
P Quantity
of 4
Plastic Anchor
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please call
customer service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Page 4
Figure 1
Insert cam locks (C) into holes on side rails
(2L/2R).
Screw cam bolts (A) into holes on side
panels (3L/3R).
Attach side rails (2L/2R) to side panels
(3L/3R) by inserting wood dowels (B) and
cam bolts (A) into corresponding holes until
side rails (2L/2R) and side panels (3L/3R)
meet.
Tighten by rotating cam locks (C) clockwise
with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).
Figure 2
Attach assembled units to side shelves
(1L/1R) by inserting wood dowels (B) into
corresponding holes until side shelves
(1L/1R) and assembled unit meet.
Use long bolts (K) through spring washers
(F) and flat washers (G) to connect
assembled units to side shelves (1L/1R).
Tighten long bolts (K) with Allen wrench (J).
Granville Media Fireplace- Espresso/ Ebony Stain
Assembly Instructions
(2)
(1)
"Please do not over tighten cam bolts,
stop when you feel them tighten"

Page 5
Figure 3
Attach assembled units to upper/lower rails
(4) by inserting 8 pcs wood dowels (B) into
corresponding holes until assembled units
and upper/lower rails (4) meet.
Figure 4
Insert cam locks (C) into holes on
assembled unit as shown in figure 4.
Screw cam bolts (A) into holes on bottom
panel (5).
Attach bottom panel (5) to assembled unit
by inserting wood dowels (B) and cam bolts
(A) into corresponding holes until
assembled unit and bottom panel (5) meet.
Tighten by rotating cam locks (C) clockwise
with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).

Page 6
Figure 5
Insert cam locks (C) into holes on
assembled unit as shown in figure 5.
Screw cam bolts (A) into holes on shelf (6).
Attach shelf (6) to assembled unit by
inserting wood dowels (B) and cam bolts (A)
into corresponding holes until assembled
unit and shelf (6) meet.
Tighten by rotating cam locks (C) clockwise
with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).
Figure 6
Insert cam locks (C) into holes on upper
partition panels (7R/7L) as shown in figure
6.
Screw cam bolts (A) into holes on shelf (6).
Attach upper partition panels (7R/7L) to
assembled unit by inserting wood dowels
(B) and cam bolts (A) into corresponding
holes until assembled unit and upper
partition panels (7R/7L) meet.
Tighten by rotating cam locks (C) clockwise
with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).

Page 7
Figure 7
Use screws (H) to connect middle back
panel (9) to assembled unit.
Tighten screws (H) with Phillips screwdriver.
Figure 8
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (A) into holes on back
panels (10L/10R).
Attach back panels (10L/10R) to assembled
unit by inserting wood dowels (B) and cam
bolts (A) into corresponding holes until
assembled unit and back panels (10L/10R)
meet.
Tighten by rotating cam locks (C) clockwise
with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).
Use long bolts (E) through spring washers
(F) and flat washers (G) to connect back
panels (10L/10R) to assembled unit.
Tighten long bolts (E) with Allen wrench (J).

Page 8
Figure 9
Insert cam locks (C) into holes on
assembled unit.
Screw cam bolts (A) into top panel (8).
Attach top panel (8) to assembled unit by
inserting wood dowels (B) and cam bolts (A)
into corresponding holes until assembled
unit and top panel (8) meet.
Tighten by rotating cam locks (C) clockwise
with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).
Figure 10
Use long flat head screws (I) to connect
fireplace pedestal (11) to assembled unit.
Tighten screws (I) with Phillips screwdriver.

Page 9
Figure 11
Push firebox (13) into the back of the unit,
then, use long flat head screws (I) through
fixed bar (12) to lock tightly.
`
Figure 12
Use screws (M) to connect brackets (L) to
the back of the top panel (8) as shown.
Tighten screws (M) with phillips
screwdriver.
Drill 3/16 inch pilot holes in near
proximity of the brackets (L) attached to
the top panel (8) and tap the plastic
anchors (P) into wall.
Use screws (N) to connect brackets (L) to
plastic anchors (P) of wall.
Tighten screws (N) with Phillips screwdriver.
Move this item close to the fastened wall
brackets (L) and tie in both brackets (L) with
plastic starps (O) as shown in diagram.
Now your fireplace is ready to use.

Page 10
Please immediately examine this product carefully. Any request for missing parts or damage
replacement must be received within 90 days of your receipt of the product. Replacement, if available,
will be honored within this time frame.Parts will not be available for items arriving fully assembled. We
do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form

Page 11
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 50” and
supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each shelf should not be loaded with more than 10 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside
drawer.
Model: FA9031A0TX and FA9031B0TX
Granville Media Fireplace
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 6/2/2014