Southern Enterprises FA934900TX User manual

Page 1
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Cabrini Media Fireplace
FA934800TX -Black
FA934900TX -white
Assembly Instructions
PO#
Support Questions: Contact Southern Enterprises, Inc. at 1-800-633-5096.
For sales inquiries, contact Sylvane at 1-800-934-9194 or visit www.sylvane.com

Page 2
(1) Quantity
of 1
Bottom Panel
(2) Quantity
of 2
Side Panel（L/R）
(3) Quantity
Of 2
Partition Panel（L/R）
(4) Quantity
of 1
Lower Top Panel
(5) Quantity
of 1
Top Panel
(6) Quantity
of 1
Upper Crossbar
(7) Quantity
of 2
Door Frame（L/R）
(8) Quantity
of 4
Leg(L/R)
(9) Quantity
of 1
Support Leg
(10) Quantity
of 4
Metal Tube
(11) Quantity
of 2
Back Panel(L/R)
(12) Quantity
of 2
Adjustable Shelf
(13) Quantity
of 1
Wood Holder
(14) Quantity
of 1
Firebox
(Sold Separately)
A Quantity
of 16
Cam Bolt
B Quantity
of 20
Wood Dowel
C Quantity
of 16
Cam Lock
D Quantity
of 16
Plastic Cover
E Quantity
of 12
Long Bolt Ø1/4”*1-3/8"
F Quantity
of 12
Spring Washer
C
abrini
M
edia
F
ireplace
-
B
lack
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.

Page 3
G Quantity
of 12
Flat Washer
HQuantity
Of 28
Ø3*12mm
Screw For Back
I Quantity
of 4
Ø5/16”*1"L
Long Flat Head Screw
J Quantity
of 1
Allen Wrench
K Quantity
Of 2
Knob
L Quantity
Of 2
Ø5/32”*7/8"L
Long Bolt
M Quantity
of 4
Hinge
N Quantity
of 24
Ø5/32”*5/8”L
Short Flat Head Screw
O Quantity
of 8
Shelf Holder
P Quantity
Of 4
Bracket
QQuantity
Of 4
3.5mm X 15 Mm
Screw For Bracket
R Quantity
Of 4
7mm X 38mm
Screw For Wall
S Quantity
Of 2
Plastic Strap
T Quantity
Of 4
Plastic Anchor
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish . Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Page 4
Figure 1
Attach legs (8) to bottom panel (1) using
long bolts (E) through spring washers
(F) and flat washers (G).
Tighten long bolts (E) with Allen wrench
(J).
Attach support leg (9) to the bottom
panel (1) rotating support leg (9)
clockwise until the tight.
Figure 2
Insert cam locks (C) into holes on
partition panels (3L/3R) and side panels
(2L/2R).
Screw cam bolts (A) into holes on
bottom panel (1). Insert wood dowels (B)
to connect upper crossbar to partition
panels (3L/3R).Attach side panels
(2L/2R) and partition panels (3L/3R) to
bottom panel (1) by inserting wood
dowels (B) and cam bolts (A) into
corresponding holes until panels meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Cover cam lock holes with plastic covers
(D).
Cabrini Media Fireplace- Black
Assembly Instructions
(2)
(1)
"Please do not over tighten cam bolts,
stop when you feel them tighten"

Page 5
Figure 3
Insert cam locks (C) into holes on
assembled unit. Screw cam bolts (A)
into holes on lower top panel (4).Attach
lower top panel (4) to assembled unit by
inserting wood dowels (B) and cam bolts
(A) into corresponding holes until panels
meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver.
Use long flat head screw (I) to connect
upper crossbar (6) to lower top panel
(4). Tighten screws (I) with Phillip
screwdriver.
Cover cam lock holes with plastic covers
(D).
Figure 4
Attach metal tubes (10) to the top panel
(5). Rotate metal tubes (10) clockwise
until they tighten.
Then use long bolts (E) through spring
washers (F) and flat washers (G) to
connect lower top panel (4) to metal
tubes (10).
Tighten long bolts (E) withAllen wrench
(J).

Page 6
Figure 5
Insert back panels (11L / 11R) into
grooves in the back of assembled unit.
Tighten screws (H) with Phillips
screwdriver.
To achieve uniform clearance around the door,
you may need to adjust the door by tightening
or loosening the two screws on the hinge itself.
Figure 6
Use short flat head screws (N) to
connect hinges (M) to door frames (7)
and left/right side panels.
Tighten screws (N) with Phillips
screwdriver.
Second, use long bolts (L) to connect
knobs (K) to door frames (7).
Tighten long bolts (L) with Phillips
screwdriver.
Insert shelf holders (O) into holes on
side panels (2L/2R) and partition panels
(3L/3R).
Finally, place adjustable shelves (12)
onto the shelf holder (O).
Screw for adjusting the door
D oor

Page 7
Figure 7
Push firebox (14) into the back of the
unit and insert long flat head screws (I)
through wood holder (13) to lock tightly.
Figure 8
Use screws (Q) to connect brackets
(P) to
lower top back (4) as shown.
Tighten screws (Q) with Phillips
screwdriver.
Drill 1/4 inch pilot holes in near proximity
of the brackets (P) attached to the lower
top back (4) and tap the plastic anchor
(T)
into wall.
Use screws (R) to connect brackets (P)
to
plastic anchors (T) on the wall.
Tighten screws (R) with Phillips
screwdriver.
Move this item close to the fastened wall
brackets (P) and tie in both brackets (P)
with
plastic straps (S) as shown in
diagram.
Now your fireplace is ready to use.

Page 8
Please immediately examine this product carefully. Any request for missing parts or damage
replacement must be received within 90 days of your receipt of the product. Replacement, if available,
will be honored within this time frame.Parts will not be available for items arriving fully assembled. We
do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form

Page 9
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 48” and
supports up to 85lb.
The top shelf is NOT INTENDED for tube televisions.
Open center shelf should not be loaded with more than 30 lb.
Enclosed side shelves should not be loaded with more than 15 lb/shelf
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside
drawer.
Model:FA934800TX
Cabrini Media Fireplace
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 6/2/2014
Support Questions: Contact Southern Enterprises, Inc. at 1-800-633-5096.
For sales inquiries, contact Sylvane at 1-800-934-9194 or visit www.sylvane.com