Southern Enterprises FA927800TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]om
www.seidal.com
"CALVERT" CARVED FIREPLACE
FA927800TX- ESPRESSO
FA927900TX- IVORY
ASSEMBLY INSTRUCTIONS
PO#12825

A B
C D
E F
G H
I
"CALVERT" CARVED FIREPLACE
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
Quantity
of 12
Cam Bolt
Quantity
Of 20
Wood Dowel
Quantity
of 12
Cam Lock
Quantity
of 6
Bolt
Quantity
of 1
Allen Wrench
Quantity
of 6
Cross Socket Nut
Quantity
of 6
Spring Washer
Quantity
of 6
Flat Washer
Quantity
of 26
Wood Screw

1 2
3 4
5 6
7 8
9 10
11 12
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please call
customer service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
"CALVERT" CARVED FIREPLACE
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
Quantity
of 1
Top Panel
Quantity
of 1
Right Side Panel
Quantity
of 1
Left Front Panel
Quantity
of 1
Right Front Panel
Quantity
of 1
Upper Front Panel
Left Side Panel
Quantity
of 1
Base Middle Front Panel
Middle Left Front Panel Middle Right Front Panel
Insert Fixed Bar Insert (sold in a separate carton)
Quantity
of 1
Quantity
of 1
Quantity
of 2
Quantity
of 1
Quantity
of 1
Quantity
of 1

Insert cam bolts (A) and wood dowels (B) to
corresponding holes on panels (4) and (5).
Insert and turn cam locks (C) clockwise to attach
left side panel (2) to left front panel (4).
Repeat procedure to attach right side panel (3)
to right front panel (5).
Insert cam bolts (A) and wood dowels (B) to
corresponding holes on the side of panels (4)
and (5).
Insert and turn cam locks (C) clockwise to attach
upper front panel (6) to panels (4) and (5).
Insert cross socket nuts (H) and wood dowels
(B) to corresponding holes on side panels (2)
and (3).
Use bolts (D), spring washers (E), and flat
washer (F) to attach base (7) to the bottom of
side panels (2) and (3).
Tighten bolts usingAllen wrench (G).
"CALVERT" CARVED FIREPLACE
Assembly Instructions
Figure 1
Figure 2
Figure 3
B
B
B
B
(2)
(1)
"Please do not over tighten cam bolts,
please stop when you feel it tighten"

Insert cam bolts (A) and wood dowels (B) to
corresponding holes on bottom side of middle
front panel (8).
Insert and turn cam locks (C) clockwise to
attach middle front panel (8) to middle left front
panel (9) and middle right front panel (10).
Insert wood dowels (B) into the corresponding
holes on the base, then, insert the assembled
unit from figure 4 onto the wood dowels.
Insert wood screws (I) into the corresponding
holes to attach the panels.
"CALVERT" CARVED FIREPLACE
Assembly Instructions
Figure 4
Figure 5
Figure 6

Insert wood screws (I) into the corresponding
holes to attach the top panel.
Attach insert (12) into the mantel as shown,.
Then, insert wood screws (I) through insert fixed
bar (11) to lock tightly.
Now your fireplace is ready to use.
"CALVERT" CARVED FIREPLACE
Assembly Instructions
Figure 7
Figure 8
I

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or
replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019