SOYO SY-6BE User manual

SY-6BE+
Motherboard
Quick Start Guide
Hardware
Installation
Quick BIOS
Setup
Introduction
The SOYO CD

SOYO™
2
SY-6BE+ Motherboard
Pentium
®
III, Pentium
®
II & Celeron
TM
processors
82440 BX AGP/PCI Motherboard
66&100MHz Front Side Bus supported
ATX Form Factor
Copyright © 1999 bySoyo Computer Inc.
Trademarks:
Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their
owners.
Product Rights:
Product and corporate names mentioned in this publication are used for identification purposes
only and may be registered trademarks or copyrights of their respective companies.
Copyright Notice:
All rights reserved. This manual is copyrighted by Soyo Computer Inc. You may not reproduce,
transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of
this publication without express written permission of Soyo Computer Inc.
Disclaimer:
Soyo Computer Inc. makes no representations or warranties regarding the contents of this
manual. We reserve the right to revise the manual or make changes in the specifications of the
product described within it at any time without notice and without obligation to notify any
person of such revision or change. The information contained in this manual is provided for
general use by our customers. Our customers should be aware that the personal computer field is
the subject of many patents. Our customers should ensure that their use of our products does not
infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights
of third parties and not to infringe upon or assist others to infringe upon such rights.
Restricted Rights Legend:
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
252.277-7013.
About This Guide:
This Quick Start Guide is for assisting system manufacturers and end users in setting up and
installing the Motherboard. Information in this guide has been carefully checked for reliability;
however, no guarantee is given as to the correctness of the contents. The information in this
document is subject to change without notice.
If you need any further information, please visit our Web Site on the Internet. The address is
"http://www.soyo.com.tw".
6BE+ Serial - Version 2.4 - Edition: December 1999
*Thesespecificationsaresubjecttochangewithoutnotice

SY-6BE+ Quick Start Guide
3
Introduction
1 1 Introduction
Congratulationsonyourpurchaseofthe SY-6BE+ Motherboard.ThisQuickStartGuide
describesthestepsforinstallingandsettingupyournewMotherboard.
ThisguideisdesignedforalluserstoprovidethebasicstepsofMotherboardsettingand
operation.Forfurtherinformation, pleasereferto SY-6BE+MotherboardUser'sGuideand
TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyour
Motherboard.
Unpacking
WhenunpackingtheMotherboard,checkforthefollowingitems:
u TheSY-6BE+82440BXAGP/PCIMotherboard
u TheQuickStartGuide
u TheInstallation CD-ROM
u SOYO3-in-1BonusPackCD-ROM(Norton AntiVirus,
GhostandVirtualDrive)
u TheCPURetentionSet
u OneIDEDeviceFlat Cable
u OneFloppyDiskDriveFlatCable

SY-6BE+ Quick Start Guide
4
Introduction
SY-6BE+ Motherboard Layout
Key Features
Ø SupportsIntelPentium
®
IIIprocessor(450-
600MHz), Pentium
®
IIprocessor(233-450MHz)
& Celeron
TM
processor(266-433MHz) )
Ø Auto-detect CPU voltage
Ø PC98, ACPI, Ultra DMA/33
Ø Power-on by modem, alarm or keyboard
Ø SOYO COMBO Setup
Ø SupportsWake-On-LAN(WOL)
Ø Supports onboard hardware monitoring and
includes Hardware Doctor™utility
Ø Supports Creative SB-LINK™(PC-PCI) for PCI
audio card
Ø 1 x 32-bit AGP slot
Ø 4 x 32-bit bus master PCI slots
Ø 2 x USB ports onboard
Ø 1 x IrDA port
Ø Supportsmultiple-bootfunction
Ø Y2K Compliant
COM 1
COM 2
PRT
USB 1USB 2
PS/2 KB
Connector
PS/2 Mouse
Connector JP10
PCI Slot #1
PCI Slot #2
PCI Slot #3
PCI Slot #4
ISA Slot #2
ISA Slot #1
ISA Slot #3
JP5
JP44
1
3
Intel
82371 EB
Intel
82443 BX
IR1
15
1
CPUFAN
Ultra
I/O Chipset
CHAFAN
1
IDE 1
IDE 2
11
1
FDC
Slot 1 for
PentiumIIProcessor
1
3
AGP Slot
ATX
Power
DIMM 1
DIMM 2
DIMM 3
Speaker
Keylock
Power
LED
Reset
PWRBT
Turbo
LED
HDD LED
_
+
_
+
_
+
_
+
3
1
BIOS Flash
Wake on
LAN
SB-LINK
TM
(PC-PCI)
Slot 1

SY-6BE+ Quick Start Guide
5
Hardware
Installation
2 2 Installation
ToavoiddamagetoyourMotherboard,followthesesimpleruleswhilehandling
thisequipment:
l BeforehandlingtheMotherboard,groundyourselfbygraspinganunpaintedportion
ofthesystem'smetalchassis.
l RemovetheMotherboardfromitsanti-staticpackaging.Holditbytheedgesand
avoidtouchingitscomponents.
l ChecktheMotherboardfordamage.Ifanychipappearsloose,presscarefullytoseat
itfirmlyinitssocket.
Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect
installationofyournew SY-6BE+ Motherboard.Fordetailedinformation,pleasereferto SY-
6BE+MotherboardUser'sguideandTechnical Reference onlinemanualincludedonthe
CD-ROMpackedwithyourMotherboard.
PREPARATIONS
Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation
successfully:
u Slot1processorwithbuilt-inCPUcoolingfan(boxedtype)
u SDRAMmodule
u Computercaseandchassiswithadequatepowersupplyunit
u Monitor
u PS/2Keyboard
u PointingDevice(PS/2mouse)
u VGACard
u SoundCard(optional)
u Speaker(s)(optional)
u DiskDrives:HDD,CD-ROM,Floppydrive…
u ExternalPeripherals:Printer,Plotter,andModem-(optional)
u InternalPeripherals:ModemandLANcards(optional)

SY-6BE+ Quick Start Guide
6
Hardware
Installation
Install the Motherboard
Followthestepsbelowinordertoperformtheinstallationofyournew SY-6BE+ Motherboard.
Step 1. Install the CPU
Mark your CPU Frequency: RecordtheworkingfrequencyofyourCPU
thatshouldbeclearlymarkedontheCPUcover.
FSB66MHz
266MHz(66 x4.0) 333MHz (66 x 5.0) 400MHz(66 x6.0)
300MHz(66 x4.5) 366MHz (66 x 5.5) 433MHz(66 x6.5)
FSB100MHz
350MHz(100 x 3.5) 450MHz (100 x 4.5) 550MHz (100 x 5.5)
400MHz(100 x4.0) 500MHz (100 x 5.0) 600MHz(100 x6.0)
CPU Mount Procedure: Tomounttheprocessorthatyouhavepurchased
separately,followtheseinstructions.
Retention Module Step 1. Open the two sides by folding them up.
Step 2. Insert the CPU into the retention
module. The CPU fits in the CPU
slot in only ONE way, do not try to
force it in.
Step 3. After completely inserting the CPU,
Now your CPU is ready for use.
Note:Installing a heat sink andcooling fan ontop ofyour CPU isnecessary forproper heat dissipation.Failing to
installthese items mayresult in overheatingandpossible burn-out ofyour CPU.

SY-6BE+ Quick Start Guide
7
Hardware
Installation
Step 2. Make Connections to the Motherboard
ThissectiontellshowtoconnectinternalperipheralsandpowersupplytotheMotherboard.
InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,ChassisFan,
FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock
Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.
FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6BE+
Motherboard, pleaserefer to SY-6BE+MotherboardUser'sGuideandTechnicalReference
onlinemanualonCD-ROM.
Connectors and Plug-ins
PCI Audio Card Header: SB-Link™(PC-PCI) Wake-On-LAN Header: JP44
Pin1 Pin2 Pin3Connect the SB-Link™(PC-PCI) cable from your
PCI audio card to this header. 5VSB GND MP-Wakeup
CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3
GND 12V SENSOR GND 12V SENSOR
Power LED Keylock
Pin1 Pin2 Pin3
Pin1 Pin2
5V NC GND
ControlPin GND
Speaker
Pin1 Pin2 Pin3 Pin4
5V NC NC Speakerout
HDD LED Turbo LED PWRBT RESET
Pin1 Pin2 Pin1 Pin2 Pin1 Pin2 Pin1 Pin2
LEDAnode LED Cathode LED Cathode GND PowerOn/Off GND Power Good GND
IrDA (Infrared Device Header): IR1
Pin1 Pin2 Pin3 Pin4 Pin5
VCC None IRRX GND IRTX
ATX Power On/Off: PWRBT ATX Power Supply: ATX PW
Connect your power switch to
this header (momentary switch
type).
To turn off the system, please
press this switch and hold
down for longer than 4
seconds.
Attach the ATX Power cable to this connector. (This
motherboardrequiresanATXpowersupply,anATpower
supplycan NOTbeused.)
Note:Please make surethe ATXpower supply isable to
provideat least 720mAof current onthe +5VSB leadif you
wantto enablethe advanced powermanagement
functions,likeWake-On-LAN, Power-On bykeyboard,etc.
Power LED
Key Lock
Speaker
Reset
PWRBT
Turbo LED
HDD LED
+
+
++
__
_
_

SY-6BE+ Quick Start Guide
8
Hardware
Installation
Step 3. Configure Memory
YourboardcomeswiththreeDIMMsockets,providingsupportforupto768MBofmain
memoryusingDIMMmodulesfrom8MBto256MB.For66MHzfrontsidebusCPUsuse
12nsorfastermemory;for100MHzfrontsidebusCPUsuse8ns(100MHz,PC100
compliant)memory.
Memory Configuration Table
Number of Memory Modules DIMM 1 DIMM 2 DIMM 3
11st
21st 2nd
31st 2nd 3rd
RAM Type SDRAM
Memory Module Size (MB) 8/16/32/64/128/256 Mbytes
Note:(1) 256 MB memory modules only available on PC registered DIMM.
(2) Always install memory modules in the order prescribed in this table.
(3) Do not install unbuffered and registered memory modules together.
Important: ItisofprimeimportancethatyouinstallDIMMmodulesasoutlinedinthetable
aboveinordertopreservesignalintegrityon100MHzfrontsidebussystems.
Step 4. Set the CPU Frequency
ThisMotherboarddoesnotuseanyjumperstosettheCPUfrequency,CPUsettingare
changedthroughtheBIOS[SOYOCOMBOSETUP].RefertoChapter3 “QuickBIOS
Setup”fordetailsonhowtosettheSlot1processorfrequency.
Step 5. Enable/Disable Power-On by Keyboard (JP10)
YoucanchoosetoenablethePower-OnbyKeyboardfunctionbyshortingpin1-2onjumper
JP10,otherwise,shortpin2-3todisablethisfunction.
Power-On by
Keyboard Enable Disable
JP10 Setting Short pin 1-2 to enable the
Power-On by Keyboard function. Short pin 2-3 to disable the Power-On by Keyboard function.
Important: When using the Power-On by Keyboard function, please make sure the
ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to
meet the standard ATX specification.
3
2
1
3
2
1

SY-6BE+ Quick Start Guide
9
Hardware
Installation
Step 6. Clear CMOS Data (JP5)
CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5
seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily
identifiedbyitswhitecoloredcap.
CMOS Clearing Clear CMOS Data Retain CMOS Data
JP5 Setting Short pin 2-3 for at least 5 seconds
to clear the CMOS.
Short pin 1-2
to retain the
new settings.
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
Note on Over-clocking Capability
TheSY-6BE+providesover-clockingcapability.Duetotheover-clockingsettingyoursystem
mayfailtobootuporhangduringruntime.Pleaseperformthefollowingstepstorecover
yoursystemfromtheabnormal situation:
1. Turnoffsystempower.(IfyouuseaATXpowersupply,sometimesyouhavetopressthe
powerbuttonformorethen4secondstoshutdownthesystem)
2. Pressandholddownthe<Insert>keywhileturningonthesystempower.Keepholding
downthe<Insert>keyuntilyouseethemessageoftheCPUtypeandfrequencyshown
onthescreen.
3. Pressthe<Del>keyduringthesystemdiagnosticcheckstoentertheAwardBIOSSetup
program.
4. Select[SOYOCOMBOSETUP]andmovethecursortothe[CPUFrequency]fieldtoset
theproperworkingfrequency.
5. Select[Save&ExitSETUP]andpress<Enter>tosavethenewconfigurationtothe
CMOSmemory,andcontinuethebootsequence.
Note: SOYOdoesnotguaranteesystem stability if the user over clocksthesystem.
Anymalfunctionsduetoover-clocking are notcoveredbythewarranty.
3
2
1
3
2
1

SY-6BE+ Quick Start Guide
10
Quick BIOS
Setup
3 3 Quick BIOS Setup
ThisMotherboarddoesnotuseanyhardwarejumperstosettheCPUfrequency.Instead,
CPUsettingsaresoftwareconfigurablewiththeBIOS [SOYO COMBO SETUP]. The
[SOYOCOMBOSETUP]menucombinesthemainparametersthatyouneedtoconfigure,
allinonemenu,foraquicksetupinBIOS.
Afterthehardwareinstallationiscomplete,turnthepowerswitchon, thenpress the <DEL> key
duringthesystemdiagnostic checksto entertheAwardBIOSSetupprogram.The CMOS
SETUPUTILITYwilldisplayonscreen.Then,followthesestepsto configurethe CPUsettings.
Step 1. Select [STANDARD CMOS SETUP]
Set[Date/Time]and[Floppydrivetype],then set[HardDiskType] to “Auto”.
Step 2. Select [LOAD SETUP DEFAULT]
Selectthe“LOADSETUPDEFAULT”menuandtype“Y”attheprompttoloadtheBIOS
optimalsetup.
Step 3. Select [SOYO COMBO SETUP]
Movethecursortothe [CPUFrequency] fieldtosettheCPUfrequency.
Available[CPUFrequency]settingsonyourSY-6BE+Motherboardaredetailedinthe
followingtable.Ifyousetthisfieldto[Manual],youarethenrequiredtofillinthenexttwo
consecutivefields:(1)theCPUHost/PCIClock,and(2)theCPURatio.
CPU Frequency
233MHz (66 x 3.5) 350MHz (100 x 3.5)
266MHz (66 x 4.0) 400MHz (100 x 4.0)
300MHz (66 x 4.5) 450MHz (100 x 4.5)
333MHz (66 x 5.0) 500MHz (100 x 5.0)
366MHz (66 x 5.5) 550MHz (100 x 5.5)
400MHz (66 x 6.0) 600MHz (100 x 6.0)
433MHz (66 x 6.5)
Select the working frequency of
your Pentium® III, Pentium® II,
Celeronprocessor among these
preset values.
Note: Mark the checkbox that
corresponds to the working
frequency of your Pentium® III,
Pentium® II, Celeronprocessor in
case the CMOS configuration
should be lost.
Note: ifyouuseBusFrequenciesof75MHz,makesurethatyourPCIcardscancopewith
thehigherPCIclock.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> tosavethenewconfigurationtotheCMOSmemory,andcontinuetheboot
sequence.

SY-6BE+ Quick Start Guide
11
The SOYO CD
4 4 The SOYO CD
The SOYO-CD will NOT autorunifyou use itonanOperatingSystem other
thanWindows9xor NT.
YourSY-6BE+MotherboardcomeswithaCD-ROMlabeled"SOYOCD."TheSOYOCD
contains(1)theuser'smanualfileforyournewMotherboard,(2)thedriverssoftware
availableforinstallation,and(3)adatabaseinHTMLformatwithinformationonSOYO
Motherboardsandotherproducts.
Step 1. Insert the SOYO CD into the CD-ROM drive
TheSOYOCDwillauto-run,andtheSOYOCDStartUpMenuwillbeasshown.
IfyouuseWindowsNT,theSOYO-CDwillnotdetectyourmotherboardtype.Inthatcasethe
followingdialogwillpopup,pleasechooseyourmotherboardandpressOK.NowtheSOYO-
CDStartUpMenuwillbeshown.
(SOYOCD StartUp ProgramMenu)
IfyouuseWindows95or98,theSOYOCDStart UpProgramautomatically detectswhich
SOYOMotherboardyouownanddisplaysthecorrespondingmodelname.
7IWA-F
7IWA-F V1.0
6IWM/L
6IWM
6IWA
LI-7000
7IWB
7IWB V1.0
7IWM
7IWM/L V1
Please Select Your Board
OKCancel
X

SY-6BE+ Quick Start Guide
12
The SOYO CD
Theuser'smanualfilesincludedontheSOYOCDareinPDF(PostscriptDocument)format.
InordertoreadaPDFfile,theappropriateAcrobatReadersoftwaremustbeinstalledin
yoursystem.
Note: TheStartUpprogramautomaticallydetectsiftheAcrobatReaderutilityisalready
presentinyoursystem,andotherwisepromptsyouonwhetherornotyouwanttoinstallit.
YoumustinstalltheAcrobatReaderutilitytobeabletoreadtheuser'smanualfile.Follow
theinstructionsonyourscreenduringinstallation,thenoncetheinstallationiscompleted,
restartyoursystemandre-runtheSOYOCD.
Step 2. Install Drivers and Utilities
ClicktheInstallDriversbuttontodisplaythelistof driverssoftwarethatcanbeinstalledwith
yourMotherboard.TheStartUpprogramdisplaysthedriversavailablefortheparticular
modelofMotherboardyouown.Werecommendthatyouonlyinstallthosedrivers.

SY-6BE+ Quick Start Guide
13
The SOYO CD
(DriverInstallation Menu)
However,todisplaythe listofall driverssoftwareavailablewithSOYOMotherboards,click
the DisplayalldriversontheSOYO CD button.Pleasemakesuretoinstallonlythe
driversadaptedtoyoursystem,orotherwisethiscausesystemmalfunctions.
Ashortdescriptionofall available drivers follows:
ØIntel .inf utility for Win 95
BecauseWindows 95doesnotrecognizethe SouthbridgeofthenewerIntelchipsets(TX,
BX,ZXetc)thisutilityhastoberun,itwillupdatethenecessaryWindows.inffiles.(Onlyfor
Windows95)
ØIntel Busmaster Drivers for Windows 95
ØIntel Busmaster Drivers for Win NT
ØIntel Busmaster Drivers for OS/2
Thesearetheofficial busmasterdriversassuppliedbyIntel.
Note:DoNEVER installtwotypes of busmasterdrivers onyoursystem, this will
leadtoconflictsandsystem instability.
ØWinbond hardware doctor for Windows xx
YourmotherboardcomeswithahardwaremonitoringIC.ByinstallingthisutilityTemperature,
FanspeedandVoltagescanbemonitored.Itisalsopossibletosetalarmswhencurrent
systemvaluesexceedorfallbelowpre-setvalues.
ThisutilitycomeswithapresetmonitoringragefortheCPUvoltage.However,thecorevoltage
oftheprocessoryoupurchasedmayfalloutofthispresetrange,soyoumayneedtoadjustthe
pre-setvalue.PleaserefertotheSY-6BE+Motherboard’sCDmanualforthedetails.
Select which driver you want to install and click OK, or click Cancel to abort the driver
installationandreturntothemainmenu.
driver revision:
Intel inf utility for Win 95
Intel BusMaster Drivers for Win 95
Intel BusMaster Drivers for Win NT
Intel BusMaster Drivers for OS/2)
Winbond hardware doctor (ver 1.4) for win 95/98
Winbond hardware doctor for win NT
CancelOK
driver revision:
Intel inf utility for Win 95
Intel BusMaster Drivers for Win 95
Intel BusMaster Drivers for Win NT
Intel BusMaster Drivers for OS/2
Winbond hardware doctor (ver 1.4) for win 95/98
Winbond hardware doctor for win NT
CancelOK

SY-6BE+ Quick Start Guide
14
The SOYO CD
Note: Onceyouhaveselectedadriver,thesystemwillautomaticallyexittheSOYOCDto
beginthedriverinstallationprogram.Whentheinstallationiscomplete,mostdriversrequire
torestartyoursystembeforetheycanbecomeactive.
Step 3. Check the Latest Releases
Clickthe'CheckthelatestReleases'buttontogotheSOYO Websitetoautomaticallyfind
thelatestBIOS,manualanddriverreleasesforyourmotherboard.Thisbuttonwillonlywork
ifyourcomputeris connectedto the internetthroughanetworkormodemconnection.Make
suretogetyourmodemconnectionupbeforeclickingthisbutton.
Step 4. Enter the SOYO CD
Clickthe EnterSOYO CD buttontoentertheSOYOHTMLdatabase.TheStartUp
programwillactivatethedefaultHTMLbrowserinstalledonyoursystem(forexample,
InternetExplorerorNetscape)tovisualizethecontentsoftheSOYOCD.
TheSOYOCDcontainsusefulinformationaboutyourMotherboardandotherSOYO
productsavailable.Foryourconvenience,thisinformationisavailableinHTMLformat,
similartotheformatwidelyusedontheInternet.
Note: IfnoHTMLbrowserisinstalledonyoursystem,theStartUpprogramwillpromptyou
onwhetherornotyouwouldliketoinstalltheInternetExplorer*browser.ClickYEStoinstall
theHTMLbrowser.Aftertheinstallationiscomplete,pleaserestartyoursystem.Thenre-run
theSOYOCDandyouwillbeabletobrowsetheSOYOHTMLdatabase.
(*InternetExplorerisaMicrosoftTrademark)

SY-6BE+ Quick Start Guide
15
How to contact us:
nIf you are interested in our products, please contact the SOYO sales
department in the region you live.
nIf you require Technical Assistance, please contact our Technical Support in
the region you live.
SOYO prefers Email as communication medium, remember to always add to the
email the country that you live in.
SOYO Taiwan
No. 21 Wu-Kung 5 Rd., Hsin Chuang
City, Taipei Hsien, Taiwan
Region Covered: Taiwan and Asia-
Pacific. (Including Australia).
Web Site: www.soyo.com.tw
Sales:
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Technical Support:
Fax: [phone]
E-mail: [email protected]
SOYO Europe BV
Signaalrood 19, 2718 SH Zoetermeer
The Netherlands
Region Covered: Europe except
Germany
Web Site: www.soyo.nl, www.soyo-
europe.com
Sales:
Tel: [phone]
Fax: [phone]
Email: [email protected]
Technical Support:
Tel : [phone]
Fax: [phone]
Email: [email protected]
SOYO USA
41484 Christy Street, Fremont, CA
94538
Region Covered: US and Canada
Web Site: www.soyousa.com,
www.soyo.com
Sales:
Tel: [phone]
Fax: [phone]
Email : [email protected]
Technical Support:
Tel: [phone]
Fax: [phone]
Email : [email protected]
SOYO (U.K.) LTD.
Unit 7, Alice Way, Hounslow Business
Park,
Hanworth Road, Hounslow, TW3 3UD
Region Covered: United Kingdom and
Republic of Ireland
Web Site: www.soyo.co.uk
Sales:
Tel : [phone]
Fax: [phone]
E-mail: [email protected]
Technical Support:
Tel : [phone]
Fax: [phone]

SY-6BE+ Quick Start Guide
16
E-Mail: [email protected]
SOYO Deutschland GmbH
August-Wilhelm-Kuhnholz-Str. 15
D-26135 Oldenburg
Region Covered: Germany
Web Site: www.saat.de, www.soyo-
saat.com, www.soyo-saat.de
Vertrieb Mainboards, Notebooks und
SoyoCom Produkte:
E-Mail: [email protected]
Fon: +49-(0)441/20910-31/33
Fax: [phone]
Technischer Support:
E-Mail: [email protected]
Fon: +49-(0)441/20910-40
Fax: [phone]
SOYO KOREA
Region Covered: Korea
Sales:
Tel : [phone]
Fax : [phone]
E-mail : [email protected]
Technical Support:
tel : [phone]
fax : [phone]
e-mail : [email protected]
SOYO Hong Kong
Region Covered: Hong Kong
Web Site: www.soyo.com.hk
Sales:
tel: [phone]
fax: [phone]
E-mail: [email protected]
Technical Support:
tel: [phone]
fax: [phone]
E-mail: [email protected]
SOYO China (Gin Mei Jei)
Region Covered: All of China
Sales:
Tel: [phone]
fax: [phone]
E-mail: [email protected]
Technical Support:
Tel: [phone]
fax: [phone]
E-mail: [email protected]
SOYO Japan
Region Covered: Japan
Web site: www.soyo.co.jp
Sales:
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Technical Support:
Tel: [phone]
Fax: [phone]
E-mail: [email protected]

Edition: December 1999
Version 2.4
SY-6BE+
SERIAL