Spark KIARA User manual

PACKAGE CONTENTS
109 mm
160 mm
160 mm
109 mm
UNICA DIMENSIONS
2
Product code: SR-O-U001
3
WALL MOUNTING UNICA CAP REMOVAL
Insert a slotted screwdriver in the small slot between the
cap and UNICA and pull the cap away.
CABLE ROUTING
Apply sealant on cables for a better protection from
humidity.
4.b
RJ-45 DC 12V
5
POWER SOURCE CONNECTION
If RJ-45 is connected to a PoE switch, terminal block DC
12V power source is not required, otherwise is mandatory.
PIN FUNCTION
GND Ground power
+12V +12VDC power
COMM Relay output common
(max 24V/1A)
NO Relay output normally
open (max 24V/1A)
NC Relay output normally
closed (max 24V/1A)
GND Ground digital input
AGND Ground audio output
AGND Ground audio input
LINE_IN Audio input
LINE_OUT Audio output
DIN_2 Digital input contact 2
DIN_1 Digital input contact 1
RS485 A RS485 A
RS485 B RS485 B
6
PIN OUT
7
Clamp
CABLES LOCKING
4.a
1
Quick Installation Guide
KIARA | PRO-VIEW
[2MP]SR-C-S2-KIARA-V12-IR | SR-C-S2-KIARA-V22-IR
[5MP]SR-C-S5-KIARA-V10-IR
[8MP]SR-C-S8-KIARA-V10-IR
Website: www.spark-security.com
E-mail: [e-mail]
Telephone: [phone]
Ticketing website: https://sparksupport.teamwork.com/support/#/tickets/new
Technical docs: http://helpdeskdocs.spark-security.com/
RESET

SECURITY HOOK
Attach the hook to UNICA to prevent the camera from
falling.
10
11 12
ANGLE ADJUSTMENT
Loosen the screw 5 and turn the camera to the desired
position.
POSITION LOCKING
To secure the position, tighten the screws 2, 3, 1, 4, and
5 respectively.
13
14
SUNSHIELD ADJUSTMENT
Loosen the screw 6 & 7. Slide the sunshield to the
desired position and tighten the screws.
8
MicroSD card
MicroSD/SDHC/SDXC CARD (optional)
Insert the memory card into the slot until it is locked.
9
CAMERA MOUNTING
Align the camera to the 1st mark and turn until it is aligned
to the 2nd mark. Then lock the safety screw that is inside.
Safety
screw
2nd mark
BRACKET ADJUSTMENT
Loosen the screws 2 & 3, then 1 & 4. Turn the bracket
to the desired position.
http://192.168.1.219
NOTES
1st mark
12
3
4
5
Sunshield
SLIDE
6
7
CAMERA CLEANING
Use soft cloth to clean the
external surface. Do not use
volatile solvents as it may
damage the camera surface.
Website: www.spark-security.com
E-mail: [e-mail]
Telephone: [phone]
Ticketing website: https://sparksupport.teamwork.com/support/#/tickets/new
Technical docs: http://helpdeskdocs.spark-security.com/
S000IMB00034 - REV.02