Spartan Elite Soldier User manual

ELITE
SOLDIER
Valve
Quick
Reference
Guide

Spartan Tool LLC |SpartanTool.com
2
NORMAL JETTING MODE
Forward Valves
• Liquid Valve: Open
• Tank Select Valve: Water Tank
Rear Valves (shown on right)
• Recirculate Valve: Water Tank
CLEAN STRAINER (DAILY)
Forward Valves
• Liquid Valve: Closed
• Tank Select Valve: Either Tank
OR
DRAIN WATER TANK
Forward Valves (curbside under frame)
• Drain Valve: Open
ANTIFREEZE TANK DRAIN
(via Strainer)
Forward Valves
• Liquid Valve: Open
• Tank Select Valve: Antifreeze Tank
• Strainer Cap: Off
Note: You can also dump antifreeze into tank while unit is
running. Do not run pump dry after tank is empty.
Valve Guide Manual
Version

Spartan Tool LLC |SpartanTool.com 3
ANTIFREEZE START POSITION
Forward Valves
• Liquid Valve: Open
• Tank Select Valve: Antifreeze Tank
Rear Valves (shown on right)
• Recirculate Valve: Water Tank
• Fill Reel Shut Off Valve: Open
• HP Reel Valve: Open
• HP Water Rocker: On (blue light turns on)
1. Verify valves are in start position and that antifreeze
tank is at least half full.
2. Connect HP hose and garden hose into recirculation
panel and tighten fully.
3. Start unit. If water tank is drained, you may need to
turn on the override rocker.
4. After 60 seconds, antifreeze should flow through
the pump / HP hose / garden hose and the clear
hose going into the recirculation panel. Change the
recirculate valve to antifreeze tank after the short hose
going into the water tank is antifreezed.
5. Turn the HP water rocker to off.
6. Turn off the unit and drain the water tank fully, using
the drain on the front curb side.
7. Open hydrant fill valve to drain any trapped water.
Watch for
Pink
Antifreeze Guide
Manual
Version

Spartan Tool LLC |SpartanTool.com
4
Recapture Guide Manual
Version
RECAPTURE START POSITION
Forward Valves
• Liquid Valve: Open
• Tank Select Valve: Water Tank
Rear Valves (shown on right)
• Recirculate Valve: Antifreeze Tank
• Fill Reel Shut Off Valve: Open
• HP Reel Valve: Open
• HP Water Rocker: On (blue light turns on)
1. Verify valves are in start position and that water tank is
at least a quarter full.
2. Verify HP hose and garden hose are still attached into
recirculation panel.
3. Start unit.
4. After 60 seconds, water should flow through the pump
/ HP hose / garden hose and the clear hose going into
the recirculation panel. Change the recirculation valve
to water tank before it reaches the 3-way valve to
prevent accidentally diluting the antifreeze tank.
5. Turn the HP water rocker to off to safely remove high
pressure hose.
6. You may now resume normal jetting with your Elite
Soldier.
Watch
for Color
Change

Spartan Tool LLC |SpartanTool.com 5
Valve Guide
Auto Antifreeze
Version
NORMAL JETTING MODE
Forward Valves
• Liquid Valve: Open
Auto Antifreeze Box
• Rotary Switch: Jetting
• Tank Drain: Off
CLEAN STRAINER (DAILY)
Forward Valves
• Liquid Valve: Closed
DRAIN WATER TANK
Forward Valves (curbside under frame)
• Drain Valve: Open
DRAIN ANTIFREEZE TANK
(via Strainer)
Forward Valves
• Liquid Valve: Open
• Strainer Cap: Off
Auto Antifreeze Box
• Rotary Switch: Jetting
• Tank Drain: On
Note: You can also dump
antifreeze into tank while unit
is running. Do not run pump
dry after tank is empty.
** Try turning the key switch
o after hitting the tank drain
button for ease of use.

Spartan Tool LLC |SpartanTool.com
6
Antifreeze Guide Auto Antifreeze
Version
ANTIFREEZE START POSITION
Forward Valves
• Liquid Valve: Open
Rear Valves
• HP Reel Valve: Open
• Fill Reel Shutoff Valve: Open
• HP Water Rocker: Off
Auto Antifreeze Box
• Rotary Switch: Antifreeze
• Tank Drain: Off
1. Verify valves are in start position and that the antifreeze tank is at least half full.
2. Connect HP hose into recirculation panel and tighten fully.
3. Turn key to the run position, do not start engine.
4. Press the cycle start button on the auto antifreeze box to start the antifreezing process.
5. The unit will now change the remaining valves and start. After 60 seconds antifreeze should flow through the pump / HP
hose / garden hose and the clear hose going to the recirculation panel. The unit will automatically shut down when the unit
is antifreezed.
6. Turn off the unit and drain the water tank fully using the drain on the front curb side.
7. Open the hydrant fill valve to drain any trapped water.

Spartan Tool LLC |SpartanTool.com 7
Recapture Guide
Auto Antifreeze
Version
RECAPTURE START POSITION
Forward Valves
• Liquid Valve: Open
Rear Valves
• HP Reel Valve: Open
• Fill Reel Shutoff Valve: Open
• HP Water Rocker: Off
Auto Antifreeze Box
• Rotary Switch: Capture
• Tank Drain: Off
1. Verify valves are in start position and that the water tank is at least a quarter full.
2. Verify HP hose is still attached into recirculation panel.
3. Turn key to the run position, do not start engine.
4. Press the cycle start button on the auto antifreeze box to start the recapture process.
5. The unit will now change the remaining valves and start. After 60 seconds water should flow through the pump / HP
hose / garden hose and the clear hose going to the recirculation panel. The unit will automatically shut down when the
unit is recaptured.
6. You may now resume normal jetting with your Elite Soldier.

OFFICE
1506 West Division Street
Mendota, IL 61342
FACTORY
1618 Terminal Road
Niles, MI 49120
800.435.3866
SpartanTool.com
CONTACT US