Spear & Jackson SS2800 User guide

ORIGINAL
INSTRUCTION
MANUAL
Important - Please read these instructions fully before operating or maintaining your shredder
ELECTRIC SILENT SHREDDER
2800W
SS2800
These instructionscontain important informationthat will help you get the best
from your shredder,protecting your power tool investment.
AFTERSALES SERVICE
01904 727505
MON-FRI 9am-5pm SAT/SUN 11am-4pm
www.spearandjackson-power.com

2
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
THANK YOU!
Dear Customer,
Thank you for choosing a Spear and Jackson shredder.
Spear and Jackson was founded in 1760 in the city of Shefeld, which is world
famous for the production of steel, cutlery and garden and hand tools.
Through continuous innovation and the use of new technologies and materials,
Spear and Jackson has gained an enviable reputation as a supplier of reliable,
high performance and high quality products designed to make your work in the
garden as easy and enjoyable as possible.
As a testament to the quality of our products, we offer a free extension of the
standard 2 years manufacturer’s warranty for all registered products. Simply register
your product within 28 days of purchase via www.spearandjackson-power.com
to extend the standard manufacturer’s warranty by an additional 12 months. After
registering your product, your garden power tool will be covered for parts and labour
for 3 years from the date of purchase, subject to the terms of the warranty. If you do
not register your product, it is important to retain your proof of purchase.
We want you to get the best out of your products. Our easy-to-read instruction man-
ual guides you with best practice use and maintenance tips. You can also visit www.
spearandjackson-power.com for online help, general tips and useful videos about
your garden product. However if you prefer to speak to one of technicians please call
01904 727505, Mon-Fri 9am-5pm and Sat/Sun 11am-4pm, we can solve around
80% of questions directly over the phone.
We hope you enjoy your product and we look forward to any feedback, as this allows
us to develop even better products for the future.
3 YEARS GUARANTEE
7 DAYS A WEEK TECHNICAL SUPPORT

3www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
CONTENTS
Safety Information 04
Description of symbols 04
General safety
05
Personal safetyY06
Operational safety 07
Maintenance and storage safety 08
Intended use 08
Box Content / Parts 09
Assembly 10
Unpacking 10
Handle assembly 10
Fix the cable retain relief
Fix the cable
Assemble the grass bag 10
Connection to the power supply 11
Operation 12
Setting cutting height 12
Connection to the power supply 13
Switching on 14
Switching off 15
General operation 16
Grass bag full indicator 16
Maintenance 17
Technical Data 20
Troubleshooting 21
Warranty 22
EC DECLARATION OF CONFORMITY 23

AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
Please read these instructions fully before operating or maintaining your machine
4
The following warning symbols appear throughout this manual and indicate the appropriate
safety measures you should take when operating and maintaining the shredder.
DESCRIPTION OF SYMBOLS
SAFETY INFORMATION
Always set the ON/OFF switch to
OFF and pull the power plug out
of the socket-outlet before doing
any work on the shredder, e.g.
cleaning the shredder and making
adjustments, or if the power cable is
entangled or damaged.
Explanation of the safety switch
on the debris box: The switch is
in the “Lock is closed” position:
The shredded material debris
box is locked. The shredder can
be switched on. The switch is in
the “Lock is open” position: The
shredded material debris box is not
locked and can be removed. The
shredder cannot be switched on.
Explanation of the lever for adjusting
the counter blade:
Turning clockwise reduces the
distance between the cutting unit
and the counter blade.
Turning counter-clockwise increases
the distance between the cutting unit
and the counter blade.
Do not step on the collection box.
The product complies with the
applicable European directives
and an evaluation method of
conformity for these directives
was done.
WARNING!
This is a warning symbol. This
symbol is used throughout the user
guide whenever there is a risk of
personal injury. Ensure that these
warnings are read and understood at
all times.
Read instruction handbook before
operating this machine.
This symbol indicates the
requirement of wearing ear.
Protection and eye protection when
using the product.
Wear protective gloves
Keep bystanders away.
Keep hands and feet out of openings
while machine is running.
Danger-rotating blades. Keep hands
and feet out of openings while
machine is running.
Do not expose to rain.

5
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
Please read these instructions fully before operating or maintaining your machine
The following warning symbols appear throughout this manual and indicate the appropriate
safety measures you should take when operating and maintaining the shredder.
DESCRIPTION OF SYMBOLS
SAFETY INFORMATION
94
Changeover switch: For a
description of the changeover
switch.
Cutting device continues to rotate
after the product is switched off.
Wait until all components have
completely stopped before touching
the unit.
Guaranteed sound power level
value in 94 dB.
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check your Local
Authority or retailer for recycling
advice.

6
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
Please read these instructions fully before operating or maintaining your machine
IMPORTANT! Read all instructions.
Failure to follow all instructions listed
below may result in electric shock, re
and/or serious injury. The term “power
tool” in all warnings listed below refers
to your mains operated power tool.
■Read the instructions carefully. Be
familiar with the controls and the correct
use of the appliance. Read and understand
the operator’s manual and observe the
warnings and instruction labels affixed to
the appliance.
■Users. Never allow children or people
unfamiliar with these instructions to use the
appliance. Children is not allowed to use
this machine. Local regulations may restrict
the age of operator. Never operate the tool
under the influence of alcohol, medication
or drugs.
■Use appropriate tool. This device is
only intended for compacting fibrous and
wood-related materials such as hedge
and tree cuttings, branches, bark and pine
cones.This device is only designated for
use on private property. Do not force small
tools or attachments to do the job of a
heavy duty tool.
■Keep work areas clean. Cluttered areas
can cause accidents.
■Consider work area environment. Do
not expose the tool to high humidity or
rain. Do not use the tool in damp and wet
conditions.Keep the work area well lit.
Do not use the tool where there is a risk
of causing fire or explosion, e.g. in the
presence of flammable liquids and gases.
■Keep all bystanders, children, and
pets away. Children must be supervised
in order to ensure that they do not play
with the machine. The operator or user
is responsible for accidents or hazards
occurring to other people or the property.
■Dress appropriately. Do not wear loose
clothing, hair or jewelry, as these can be
caught in moving parts. Preferably wear
non-slip footwear when working outdoors.
Wear protective hair covering to keep long
hair out of the way.
■Head protection. Always use safety
glasses and gloves. Use a face or dust
mask whenever the operations may
produce dust or flying particles. Wear ear
protection whenever the sound level seems
uncomfortable.
■Do not overreach. Keep proper footing
and balance at all times.
■Stay alert, watch what you are doing.
Use common sense when operating the
appliance. Do not operate the tool when
you are tired.
■Make sure that the material inserted into
the shredder does not contain hard objects
made of metal, stone, glass or similar.
■Remove adjusting keys and wrenches.
Do not operate the shredder when you are
tired or distracted, or under the influence of
alcohol or medication. Always take a break
when you need one and be sensible about
how you work.
■Risk of cut. Before you start up the
shredder, check that all of the nuts, bolts
and other fastenings are tight. Covers must
be fastened properly and in good working
order. Replace any damaged or illegible
stickers.
■Do not leave the shredder working
unattended and keep it in a dry place out of
children’s reach.
■Check for damaged parts. Before further
GENERAL SAFETY
SAFETY INFORMATION

7
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
use, carefully check the tool for damage.
Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting and any other condition that may
affect its operation. Do not use the tool if
any parts are damaged or defective. Have
any damaged or defective parts repaired
or replaced by an authorized service agent.
Never attempt any repairs yourself.
■Store idle tools. When not in use, tools
should be stored in a dry, locked-up place
out of reach of children.
■Maintain tools with care. Keep tools
clean and in good condition for better and
safer performance. Follow the instructions
for maintenance and changing accessories.
Keep handles and switches dry, clean and
free from oil and grease.
■Have your tool repaired by an
authorized service agent. This tool is
manufactured in accordance with the
relevant safety regulations. To avoid danger,
electrical appliances must only be repaired
by qualified technicians.
WARNING!
Use only attachments or accessories
recommended by the manufacturer of
this tool.
The use of attachments or
accessories not recommended can
result in serious personal injury.
■Ensure that the area you are working in is
clean and well lit. Untidy or unlit workplaces
can lead to accidents.
■Only use the shredder in the open (that is,
away from walls or other rigid structures) on
a firm, level surface.
■Do not use the machine on a paved,
gravelled area, which could be damaged by
ejected material.
■The plug of the electrical tool must fit into
the socket. The plug may not be modified
in any way. Do not use an adapter plug
in conjunction with a grounded electrical
tool. Unmodified plugs and the appropriate
sockets will reduce the risk of an electrical
shock.
■Avoid body contact with grounded
surfaces, for example, pipes, heating,
ovens and fridges. There is an increased
risk of electrical shock if your body is
earthed.
■Keep the electrical tools away from rain or
damp. Water entering an electrical device
will increase the risk of an electrical shock.
■Damaged cables, coupling and plugs or
connecting leads not corresponding to
specifications, must not be employed.
Remove the plug immediately from the plug
socket in case of damage to the mains
cable.
■If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons to avoid
a hazard.
■When you use an electrical tool out in
the open, use an extension cable that is
designed for outside use. Damaged cables,
coupling and plugs or connecting leads not
WORKPLACE SAFETY
SAFETY TIPS FOR ELECTRONIC
DEVICES

8
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
corresponding to specifications, must not
be employed. Remove the plug immediately
from the plug socket in case of damage to
the mains cable.
■If it is not possible to avoid using the
electrical tool in a damp environment, use a
residual current circuit-breaker with a trigger
current of 30 mA or lower. The use of a
residual current circuit-breaker reduces the
risk of an electrical shock.
■Arrange the connecting cable in such a way
that it cannot be caught by branches or
similar when cutting.
■Do not overload the device. Use the
appropriate electrical tool for the job in hand.
■Using the correct electrical tool allows you to
work better and more safety in the specified
performance range.
■Do not use an electrical tool with a defective
switch. An electrical tool that cannot be
switched on or off is dangerous and must be
repaired.
■Do not transport or tip the shredder with the
motor running.
■Keep electrical tools that are not in use well
out of the reach of children. Do not allow
people who are unfamiliar with the device or
who have not read these instructions to use
the device.
■Electrical tools are dangerous if they are
used by inexperienced persons.
■Switch the shredder off and pull the plug
under the following circumstances:
- When you are not using the device,
- Transporting it or leaving it unattended;
- Before releasing a jammed blade.
- When you are checking the device,
cleaning it or removing blockages;
- When you are carrying out cleaning
or maintenance work or replacing
accessories;
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
- Before moving or lifting the shredder
- If foreign objects should enter the
shredder, if the shredder is making
unfamiliar noises or vibrations (check the
shredder for damage before starting it up
again).
■Ensure that your cutting tools are sharp
and clean. Properly cared for cutting tools
with sharp cutting edges are less likely to
become jammed and are easier to operate.
■Use the electrical tool, accessories,
adjustment tools etc. in accordance with
these instructions. Take the working
conditions and the tasks to be completed
into account. The use of electrical tools for
tasks other than the one they are intended
for can lead to dangerous situations.
■Pay attention to what you are doing and
be sensible when working with an electrical
tool. Do not use an electrical tool if you are
tired or under the influence of drugs, alcohol
or prescription drugs. A single moment of
inattention when using an electrical tool can
lead to serious injuries.
■Wear personal protective gear and always
wear goggles. Wearing personal protective
clothing, such as breathing masks, non-
slip safety shoes, protective helmet or ear
defenders, according to type and use of the
electrical tool, will reduce the risk of injuries.
■Avoid starting the tool accidentally. Ensure
that the electrical tool is switched off before
you connect it to the power supply and/
or battery, or transport it. If you have your
finger on the switch when moving the device
or have it switched on when connecting
to the power supply, this may lead to
accidents.
PERSONAL SAFETY

9
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
■Remove the adjusting tools or wrench before
switching the electrical tool on. A tool or
a wrench caught in a rotating part of the
device may lead to injuries.
■Avoid abnormal body positions. Ensure
that you are standing firmly, and keep your
balance at all times.
■Keep hands, other body parts and clothing
out of the filling chamber and ejection
channel and away from other moving parts.
■In the event of blockages in the machine
intake or ejection, switch off the motor
and disconnect the machine from the
mains before removing leftover material
in the intake opening or ejection channel.
Ensure that the motor is free of rubbish and
other accumulations in order to safeguard
the motor from damage or possible fire.
Remember that the cutting tool is also
activated when the starting mechanism is
started on a motor operated machine.
■Do not reach into the funnel feeder during
operation. The shredder will continue to run
for a short period after you switch it off.
■Only have your electrical tools repaired
by qualified specialists and with original
replacement parts. This ensures that the
safety of the electrical tool is maintained.
■Before conducting any maintenance, make
sure the device is unplugged (disconnect the
power supply) and wait until the blade shaft
is at a complete standstill. Allow the device
to cool down before doing anything.
■Only those maintenance and fault elimination
tasks described here may be carried out.
Any other tasks must be completed by a
specialist.
■Check all screws regularly to ensure that
they sit tight.
■Conversions, independent modifications
and the use of non-approved parts are not
permitted.
■Only use original replacement parts. Only
these replacement parts are designed and
suitable for the device. Other replacement
parts will not only lead to an invalidation of
the guarantee, they may also endanger you
and your environment. Always store the
device in a dry location.
■If the machine is switched off for the
purpose of maintenance, storage or to
replace an accessory, ensure that the plug
has been pulled from the socket. Ensure
that all of the moving parts have come to
a standstill and, if there is a key, remove
it. Allow the machine to cool down before
carrying out maintenance, adjustment work
etc.
■Always allow the machine to cool down
before storing.
■Never transport the unit with the engine
running. Protect the device from becoming
damaged during transportation.
■Before starting the machine, look into the
feeding chamber to make certain, that it is
empty.
■Keep proper balance and footing at all
times. Do not over reach. Never stand at a
higher level than the base of the machine,
when feeding material into it.
■Always stand clear of the discharge zone
when operating this machine.
■When feeding material into the machine be
extremely careful that pieces of metal, rocks,
SERVICE
PREPARATION

10
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
bottles, cans or other foreign objects are
not included.
■If the cutting mechanism strikes any foreign
objects or if the machine should start
making any unusual noise or vibration, shut
off the power source and allow the machine
to stop, disconnect the plug from supply
and take the following steps :
a) Inspect for damage.
b) Check for and tighten any loose parts
c) Have any damaged parts replaced or
repaired with parts only supplied from
original manufacture.
■Do not allow processed material to build
up in the discharge zone ; this may prevent
proper discharge can result kickback of
material through the feed intake opening.
■Keep all guards and deflectors in place and
in good working condition.
■Only switch the shredder off once the
funnel feeder is completely empty since the
shredder may otherwise clog up and not be
able to start afterwards.
■Shut off the power source and disconnect
the plug from the power supply whenever
you leave the work area.
■Do not tilt the machine while the power
source in running.
■Motor should be kept clean of debris and
other accumulations.
MAINTENANCE AND STORAGE
SAFETY
■Disconnect the product from the power
supply and check for damage after use.
INTENDED USE
This electric garden shredder is designed
only for shredding organic garden waste.
Place biologically degradable material, e.g.
leaves, branches, dead flowers etc., into
the loading funnel inlet.
The equipment is to be used only for its
prescribed purpose. Any other use is
deemed to be a case of misuse. The user
/ operator and not the manufacturer will be
liable for any damage or injuries of any kind
caused as a result of this.
Any use of the machine that deviates from
its intended use and is not included in these
instructions is considered unauthorized use
and relieves the manufacturer from his or
her legal liability.
■Disconnect the product from the power
supply before carrying out maintenance or
cleaning work. Use only the manufacturer’s
recommended replacement parts and
accessories.
■Inspect and maintain the product regularly.
Have the product repaired only by an
authorised service centre or similar qualified
specialist.
■When not in use, store the product out of the
reach of children.
■Have your power tools serviced by a
qualified repair person using only identical
replacement parts. This will ensure that
safety of the power tool is maintained.

11
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
BOX CONTENT
PARTS
If there are any parts missing, please call the customer helpline on 01904 727505
Feeding hopper
Handle
Safety switch
On/Off switch
Forward/Reverse switch
Counter blade adjusting knob
Plug
Collection box lock button
1 9
2 10
3 11
4 12
5 13
6 14
7 15
8 16
Wheel
Wheel cover
Support foot
Back cover
Collection box
Push stick
Spanner
Allen wrench
5
7
8
3
4
12
12
6
9
10
11
13
14
15 16

12
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
ASSEMBLY
Unpacking
i. Unpack all parts and lay them on a flat, stable surface.
ii. Remove all packing materials.
iii. Make sure the delivery contents are complete and
free of any damage. If you find that parts are missing
or show damage do not use the product but contact
the aftersales service within 28 days of purchase.
Using an incomplete or damaged product represents
a hazard to people and property.
iv. Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
Assemble the wheel
i. Turn the shredder upside down and pivot the legs
upward.
1
2
ii. Place the supplied wheel axle (A) through the
respective openings.
iii. Put the supplied washer (B) and sleeve (C) onto
the wheel axle.
iv. Place the wheels (D) and install the nut hand tight
(E).

13
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
v. Insert the Allen wrench into wheel shaft to hold the
shat, and use the supplied hex wrench to fix the
wheels tightly.
vi. Finally, place the wheel cover (G) in the center of the
wheel.
ASSEMBLY
Install collection box
3
i. Press down the lock button (A) and then insert the
collection box into the undercarriage.
ii. Press the lock button upward.
ON
OF F
A
ON
OF F

14
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
OPERATION
General operation
i. Check the product, its power cord and plug as well as
accessories for damage before each use. Do not use the product
if it is damaged or shows wear.
ii. Double check that accessories and collection box are properly
fixed.
iii. Always hold the product by its handles. Keep the handles dry to
ensure safe support.
To start and stop
i. Press the Forward/Reverse switch (A) to I position.
ii. Press the On/Off switch (B) to ON (I) position to start the
motor.
iii. Press the On/Off switch (B) to OFF (O) position to stop the
motor.
CAUTION: Damage to the machine due to improper
operation and/or incorrect handling can result in machine
damage.
Only feed materials to be shredded after the machine is
switched on. Do not feed materials to be shredded after
the machine is switched off.
NOTE: The machine is equipped with a safety switch to
prevent it from being switch on again accidentally after a
power failure.
For safety reasons, the shredder will not operate without a
correctly attached collection box.
AB

15
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
OPERATION
Overload protection
This machine is equipped with an overload protection system.
To protect the motor from being damaged, the safety switch
will automatically switch off the power, when the motor is
overloaded.
Wait at least 1 minute before restarting by first pressing the
safety switch (A) and then the On/Off switch. If the motor does
not restart, do the following:
i. Press the safety switch (A).
ii. Press the Forward/Reverse Button (B) to REVERSE II
position.
iii. Press and hold the On/Off switch to ON(I) position to
remove any objects that could obstruct the blades.
Tips
■Be sure to observe the safety instructions.
■Always wear work gloves, goggles and ear protection.
■Fill the material you want to shred at the funnel on the side
with the larger opening
■The material is drawn into the shredder automatically.
CAUTION! Long pieces of material projecting out
of the funnel inlet may whiplash when it is drawn
in – keep a safe distance between yourself and the
machine.
■Judge the quantity of material which you put into the funnel
inlet so that the funnel does not get blocked.
BA

16
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
OPERATION
Emptying the shredded material debris box
The level of material in the shredded material debris box can be
checked by looking through the slots on the side of the cover.
Always empty the shredded material debris box in good time
to prevent it from over filling.
i. Switch off the device at the ON/OFF switch.
ii. Release the shredded material debris box. To do so, press
the safety switch down.
■If you want to shred withered, damp material that has been
lying in the garden for several days, alternate between
putting in this material and branches. This will help to prevent
the loading funnel becoming clogged with material.
■Do not shred soft waste (e.g. kitchen waste) – put it straight
in the compost box.
■Entangled branches and leaves should be thoroughly
shredded before loading any more material.
■Do not allow the discharge opening to become clogged with
shredded material – risk of pile-ups.
■Do not cover the ventilation slits.
■Do not place heavy material or thick branches into the
machine continuously. This may cause the blade to jam.
■Ensure tool is switched off and disconnected from the power
supply before using a plunger or hook to remove jammed
objects from the funnel or discharge openings.
Important: The material will be crushed, mashed
and shredded by the cutting unit, thus accelerating
the decomposition process for composting.
ON
OF F

17
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
OPERATION
iii. Take the shredded material debris box out at the front.

18
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
MAINTENANCE
Adjusting the counter blade
There is an adjustment device on the right-hand side of the
plastic housing for this purpose. Turn the knob (C) clockwise
so that the screw moves towards the shredding blade. After a
half turn the counter blade will have moved 0.50 mm closer to
the shredding blade. After completing this adjustment check
whether the blade produces the desired results.
IMPORTANT: If the shredding blade touches the counter
blade, it will cut it and small metal chips may fall out of
the discharge opening. This is not a fault, but it must only
be adjusted as much as necessary since otherwise the
counter blade will suffer premature wear.
When the counter blade cannot be adjusted any more, it has
reached its wear limits and must be replaced.
AB
C

19
www.spearandjackson-power.com AFTER SALES SUPPORT 01904 727505
Replace counter blade
Important! Wear work gloves! Switch off the
equipment and pull out the power plug.
i. Release and remove the shredded material debris box.
ii. Undo the knob for setting the counter blade by approx. 5
turns.
iii. Undo the 4 Allen screws (A) fully.
iv. Now you can take off the cover.
v. Only use original blades from the manufacturer available via
the website below.
vi. Finally, you must reset the counter blade as described above
.
MAINTENANCE
1
A
B
C
UK plug
If you need to replace the fitted plug, then this must be replaced
using a BS1363/A Mains plug fitted with a BS1362 approved
fuse of identical value to the original fuse. Proceed as follows:
IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code:
Blue – Neutral, Brown – Live In case the colours of the wires in
the mains lead don’t match the colour marking on the terminals,
please proceed as follow.
Connect the blue wire to the terminal marked N (Neutral) or
coloured black. The brown wire must be connected to the
terminal marked L or coloured red.

20
AFTER SALES SUPPORT 01904 727505 www.spearandjackson-power.com
MAINTENANCE
Storage
i. Store the product and its accessories in a dry, frost-free place.
ii. Always store the product in a place that is inaccessible to children.
The ideal storage temperature is between 10 and 30°C.
Transportation
i. Switch the product off and disconnect from power supply before
transporting it anywhere.
ii. Protect the product against scratching and secure it to avoid
damage from impact.
After use
i. Switch the product off, disconnect it from the power supply and let
it cool down.
ii. Check, clean and store the product as described below.
Recycling and disposal
i. Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local
Authority or local store for recycling advice.
ii. The product comes in a packaging that protects it against
transportation damage. Keep hold of the packaging until you
are sure that all the parts have been delivered and the product is
functioning properly. Recycle the packaging afterwards.