Sphere Alarm SPH010405 User manual
Sphere Alarm System:
Wireless Vibration Sensor User Guide
SPH010405
Wireless Vibration Sensor
LED Status
Introduction
This one piece sensor/transmitter incorporates two shock tubes that detect subtle
vibrations. Once the vibration exceeds the safety threshold, a wireless signal is sent
to the Sphere Alarm System. The sensor helps warn you about unauthorized entry
through windows or doors and into display cases or safes. The app lets you know
when to replace the battery.
LED Indicator
Cover Inside
• LED flashes once: A vibration
exceeded the safety threshold
and triggered a wireless signal
to the Base Unit.
• LED light stays on: Low battery–
please replace the battery
immediately.
2
Scan the QR Code for Pairing with the Base Unit
• Scan the QR code on the back of the device via the Add Accessory function in the app.
• Successful pairing is confirmed in the app.
Installation
• Open the case and remove the battery’s insulating strip.
• Pair with Base Unit by app before attaching the sensor to a surface.
• Attach the sensor using the double-sided sticky tape to safes, drawers,
doors or windows.
3
Insert the at blade
of a small screw-
driver into the pry-o
slot of transmitter.
Twist the blade to
remove the cover.
Remove the used
battery and replace
with one CR2032
battery with the plus (+)
symbol facing up.
1 2
Replacing the Battery
Sensor Placement
Specifications
Working Voltage
Battery
Working Current
Standby Current
Transmission Distance
Transmission Frequency
Working Temperature
Humidity
Weight
Dimensions ( L x W x H )
DC 3V
1 × CR2032 button type (3V)
20mA
2μA
656 ft. (200 m) without obstacles
433.92 MHz
14°F~104°F (-10°C~ 40°C)
≤90%rh (non-condensing)
1.3 oz. (35.5 g) without battery, 1.4 oz. (40 g) with battery
3.1˝x 1.5˝x 0.5˝ (8 x 3.8 x 1.3 cm)
3
4
Help & Warranty Info
Thank you for purchasing a Sphere Alarm product!
We appreciate your business and strive to make
your experience the best possible.
If you have any issues with your product,
please contact us at:
support@spherealarm.com
Warranty Info
This Limited Warranty applies to physical goods sold by Sphere
and lasts for a period of one year from the date of sale of the device.
This Limited Warranty covers any manufacturing defects to the device or accessories
encountered by normal use. This warranty does NOT cover damages resulting from
improper use of the device (including the use of incompatible accessories such as
chargers, storage devices, etc.), unauthorized modifications to the device, negligence, or
from any environmental or natural disasters, or from loss or theft. This warranty requires
proof of sale of the device from Sphere or from approved resellers only.
Devices that are covered will be repaired or replaced at Sphere’s discretion. Devices
requiring replacement will be fulfilled with a new or refurbished unit, or a similar unit if
the original unit is no longer available.
To take advantage of our warranty, please go to:
http://www.spherealarm.com/return-policy/
5
Sphere Alarm is a registered trademark of Sphere, 2019. All rights reserved.
FCC Regulation
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This product can be used across EU member states.
We declare that this device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
FCC Approval Number:2AS7G-SPH010405
Table of contents
