Spirit CU900 User manual

CU900 TV BRACKET
INSTALLATION GUIDE

Spirit Fitness

www.spirittness.com
Congratulations on your new TV bracket and welcome to the Spirit Fitness family!
Thank you for your purchase of this TV bracket from Spirit Fitness. This bracket was manufactured by one of
the leading tness manufacturers in the world and is backed by one of the most comprehensive warranties
available. Through your dealer, Spirit Fitness will do all we can to make your ownership experience as pleasant
as possible for many years to come. If not purchased direct from Spirit Fitness, the local dealership where you
purchased this bracket is your administrator for all Spirit Fitness warranty and service needs. Their responsibility
is to provide you with the technical knowledge and service personnel to make your experience more informed
and any difculties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number, and the date of
purchase below to make any future, needed contact easy. We appreciate your support and we will always
remember that you are the reason that we are in business. Please complete and mail your registration card
today.
Yours in Health,
Spirit Fitness
NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________

Spirit Fitness
WARNING:
This product may contain a chemical known to the state of California to cause cancer, birth defects, or
other reproductive harm.

5
www.spirittness.com
CU900 T V BRACKET STEP ONE
1. Remove the console cover and console.
2. Remove Handlebar assembly and disconnect HR
wires.
3. Using a TV cable, or wire snake (indicated by
a thick black line), drop it down the hole of the
console mast tube. The cable should be free to
travel all the way down the main tube and will
exit the bottom of the machine.

6
Spirit Fitness
1. Route the cables at the top of the machine
through the TV bracket and mount the bracket
on top of the handle bar mount (installing both
at the same time) using the original handle bar
hardware.
CU900 T V BRACKET STEP TWO

7
www.spirittness.com
CU900 T V BRACKET STEP THREE
1. Re-assemble console and console cover to the
console mast after removing the dummy panel.

8
Spirit Fitness
CU900 T V BRACKET STEP FOUR
1. Assemble the TV to the TV bracket with four M4
SCREWS (6), SPLIT WASHERS (7) and FLAT
WASHERS (8). Attach the rear TV bracket cover
with the M5 SCREW (9).
2. Connect the cables to the TV.
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
6 SCREW M5x12mm 4
7 SPLIT WASHER M4 4
8 FLAT WASHER 4x1.0 4
9 SCREW M5x12mm 1

9
www.spirittness.com
NOTES

10
Spirit Fitness
NOTES

11
www.spirittness.com
NOTES

800.258.4555
spiritservice@spirittness.com
www.spirittness.com
Spirit Fitness
3000 Nestle Road
Jonesboro, AR 72401
CU900 TV Bracket Installation Guide
© 2018 All Rights Reserved
Revision: 02.28.2018