Splash 91001 User manual

OWNER’S MANUAL
Read This Manual Before Assembling and Use
Please Keep This Manual for Future Reference
THE WALL SKIMMER
#91002
#91001

1
Content
1、Products Description…………………………………………………………………….….2
2、Warnings……………………………………………………………………..………………….…2
3、Installation Procedure for 91001…………………………………………………….….3
4、Installation Procedure for 91002………………………………………………………4
5、Installation Procedure for Eyeball Parts………………………..........................…5
6、Product Explosion Diagram and List of Accessories…………………….……6
1

2
Product Description
These two wall skimmers are suitable for the above-ground pool series, which are
made of steel structure swimming pools, assembled structure swimming pools,
steel hoarding pools, modular assembly swimming pools, etc. The product is
injection molded from high-strength ABS, equipped with a valve and filter basket,
which
automatically blocks the pool floats and avoids further inhaling into the water
pump. It can be used together with manual cleaning kit to clean the pool. The
bottom of the product is a 1.5" threaded connection port which can be connected
to the filtration system with a hose, and the water will be cleaned and finally
returned to the pool.
Warnings:
The water level of the pool is required to be kept at more than half of the opening
end of the wall filter. If the water level is too low, the air may be inhaled into the
filter system, causing personal injury or property damage.
The Wall Skimmer
Eyeball Parts
Filter System
Above-ground
2

Installation
Procedure for 9
1. Remove the skimmer
and its accessories from the box.
2. Make sure
the holes size and position on the pool wall are matching skimmer
requirements (see Figure1).
3. Place the double layers
square
position of the square gasket
has to be
wall.
4. Attach the skimmer
body to the double
the pool, and fix the skimmer
body with 4 pan head screws (
5. Attach the square plate to the double
the pool, and then screw the countersunk head screw to tighten.
6. Finally, install
other accessories
Figure1
Double
Layers Square
Gasket
Pool
Skimmer Body
Installation Cut View
3
Procedure for 9
1001
and its accessories from the box.
the holes size and position on the pool wall are matching skimmer
square
gasket at the openings
of the pool wall. The hole
has to be
aligned with the hole positions
of the pool
body to the double
layers square gasket
on the outer wall of
body with 4 pan head screws (
see Figure2).
5. Attach the square plate to the double
layers square gasket
on the inner wall o
the pool, and then screw the countersunk head screw to tighten.
other accessories
like weir\cover\ vac plate (see Figure3).
Figure3
Pool
Wall
Square
Face
Plate
Pool
the holes size and position on the pool wall are matching skimmer
of the pool wall. The hole
s
of the pool
on the outer wall of
on the inner wall o
f
Figure2
3

Installation procedure for
1. Remove the skimmer
and its accessories from the box.
2.
Make sure the holes size and position on the pool wall are matching skimmer
requirements (see Figure4).
3. First place a single-
layer square
holder, then put on the
skimmer
（see Figure5）
4. Place the double layers
rectangle
holes position of the
rectangle
the pool wall.
5. Attach the skimmer
body to the double
of the pool, and fix the
skimmer
6. Attach the rectangle
plate to the double
of the pool, and then screw the countersunk head screw to tighten.
7. Finally, install
other accessories
Figure4
Double Layer
Skimmer Base
Single Layer Square
Gasket
Installation Cut View
4
Installation procedure for
91002
and its accessories from the box.
Make sure the holes size and position on the pool wall are matching skimmer
layer square
gasket into the small end groove of the
skimmer
skimmer
body and finally tighten with 8 pan head screws.
rectangle
gasket
at the opening of the pool wall. The
rectangle
gasket has to be
aligned with the hole position
body to the double
layers rectangle gasket
on the outer wall
skimmer
body with 4 pan head screws (see Figure6
).
plate to the double
layers rectangle gasket
on the inner wall
of the pool, and then screw the countersunk head screw to tighten.
other accessories
like weir\cover\ vac plate (see Figure3).
Rectan
gle
Face
Plate
Pool Wall
Double Layer
s Rectangle
Skimmer Base
Pool
Skimmer Base
Double Layers Rectangle
Make sure the holes size and position on the pool wall are matching skimmer
skimmer
body and finally tighten with 8 pan head screws.
at the opening of the pool wall. The
aligned with the hole position
s of
on the outer wall
).
on the inner wall
Figure5
Figure6
Skimmer Base
4

Installation Procedure for Eyeball Parts
1. Cut a round hole in
reflow connection position
(2.4").
2. First put a round gasket
on the
the w
all of the pool, and the threaded end faces the outer wall.
3.
At the outer wall of the swimming pool, put the round
into the threaded end, tighten with an octagonal nut, and then wrap the raw tape
around the joint and screw it into the
4.
At the inner wall of the swimming
ball set bush
, and tighten the eye
Hose Adaptor
Octagonal Nut
5
Installation Procedure for Eyeball Parts
reflow connection position
with a hole diameter of 61MM
on the
ball set bush
, then put it into the round hole on
all of the pool, and the threaded end faces the outer wall.
At the outer wall of the swimming pool, put the round
gasket and
paper
into the threaded end, tighten with an octagonal nut, and then wrap the raw tape
around the joint and screw it into the
ball set bush.
At the inner wall of the swimming
pool, put the eye ball base and eye
ball into the
, and tighten the eye
ball ring.
Ball Set
Round Gasket
Round Gasket
Paper Gasket
Octagonal Nut
Eye Ball
Eye Ball
Eye Ball Ring
with a hole diameter of 61MM
, then put it into the round hole on
paper
gasket
into the threaded end, tighten with an octagonal nut, and then wrap the raw tape
ball into the
5

6
Product Explosion Diagram andList of Accessories
No. Article Number Parts Names Qty
1 49101501 Cover 1
2 49101201 Vac Plate 1
3 49101601 Basket with Plastic Handle 1
4 49100101 Wall Skimmer Body 1
5 91017000 Weir 1
6 49101101 Hose Adaptor 3
7 49100901 Double Layers Square Gasket 1
8 49100701 Square Face Plate 1
9 5862055000 91001 Screw Kit 1
10 49100911 Single Layer Square Gasket 1
11 49100301 Skimmer Base 1
12 49101801 Double Layers Rectangle Gasket 1
13 49100601 Rectangle Face Plate 1
14 5862056000 91002 Screw Kit 1
15 49102101 Octagonal Nut 1
16 5435001087 Paper Gasket 1
17 49101001 Round Gasket 2
18 49101901 Ball Set Bush 1
19 49102201 Eye Ball Base 1
20 49100501 Eye Ball 1
21 49100502 Eye Ball Ring 1
6

SAVE THESE INSTRUCTIONSSAVE THESE INSTRUCTIONS