Sport-thieme 131 6201 Manual

Operating/ assembly instructions
Post transport trolley
Prod. code: 131 6201
page 1 of 3
04/2016
!
!
!
38367 Grasleben / Germany
Telephone: [phone]
!!!"#$%&'(')*+,+"-%,.
!
Assembly instructions for post transport trolley
Thank you very much for choosing a Sport-Thieme product. Please read the
instructions fully before you assemble the equipment so you can enjoy the product
and its guaranteed safety:
Included:
Pos. Description
1 2 x side (pre-assembled)
2 1 x strut (2.01 m, with tenon)
3 1 x strut (1.92 m, with plate)
4 2 x hex bolt M10 x 45, washer DIN 125, nut DIN 934
5 4 x hex bolt M10 x 65, washer DIN 125 / 9021, nut 934
1. General
This trolley is designed for the storage and transport of max. 16 posts used in
sports (e.g. volleyball post or high bar posts).
On both sides, there are 4 brackets, each 20 cm deep, positioned at a distance
of 25 cm.
Most parts of the transport trolley are pre-assembled.
The brackets have felt pads to protect the posts. For easier transport, the
trolley is fitted with Ø 75 mm double swivel castors.
Ill 1: transport trolley

Operating/ assembly instructions
Post transport trolley
Prod. code: 131 6201
page 2 of 3
04/2016
!
!
!
38367 Grasleben / Germany
Telephone: [phone]
!!!"#$%&'(')*+,+"-%,.
!
!
"
#
Ill. 3: upper strut
#
$
#
Ill. 2: exploded view drawing
%
Ill. 4: lower strut
2. Assembly instructions
Put the struts!from above into the two sides#. Now bolt the lower strut$using the
hex bolts M10 x 65, washers and nuts%between the two sides#. Ensure that the
large washer is on the outside.
Finally, bolt together the upper strut!and the sides#.
3. Maintenance and inspection
The trolley is designed for a maximum load of 320 kg (20 kg x 16 brackets).
The transport trolley is designed for its intended use only. Improper use voids the
warranty.

Operating/ assembly instructions
Post transport trolley
Prod. code: 131 6201
page 3 of 3
04/2016
!
!
!
38367 Grasleben / Germany
Telephone: [phone]
!!!"#$%&'(')*+,+"-%,.
!
Caution: Do not climb or overload the equipment!
Maintenance and care instructions
Instructions: Carry out a visual check at regular intervals. Due to our
continuous quality control of the products, technical changes
may occur which may lead to slight deviations in the
instructions.
Check at regular intervals that the screw connections are tight.
Check the equipment for possible damage and replace worn-out
parts. Ensure that moveable parts are free-moving.
We are happy to answer any questions you may
have.
Your Sport-Thieme Team