Sport-thieme 115 7013 Manual

Operating/assembly instructions
Wall bracket for net hangers
!
Sport-Thieme GmbH
38367 Grasleben / Germany
Tel:
[phone]
Fax: [phone]
Prod. code: 115 7013
page 1of 2
04/2016
!
!
Assembly instructions wall bracket for net hangers
Thank you very much for choosing a Sport-Thieme product. We want to make sure
that you can enjoy this product, so here is some important advice for your safety as
well as for the use and maintenance of the equipment.
Please read these instructions carefully before you assemble and
use the equipment:
!
"
!
Illustration 1: wall bracket for net hangers
When you open the package, please ensure all the necessary parts are included:
"1 x wall bracket
#2 x hex wood screw M8 x 80 DIN 571
$2 x washer 8 DIN 125
!2 x nylon wall plug GD 12
#
$
$
#

Operating/assembly instructions
Wall bracket for net hangers
!
Sport-Thieme GmbH
38367 Grasleben / Germany
Tel:
[phone]
Fax: [phone]
Prod. code: 115 7013
page 2of 2
04/2016
!
!
1 General
The wall bracket is designed for the tidy storage of rolled-up nets. The nets are
rolled up on the respective net brackets (prod. code: 115 7000) and then
compactly put on the wall.
2 Assembly instructions
Following the measures from illustration 1 (in mm), drill two holes into the wall and
put the nylon wall plugs !into the holes. Mount the wall bracket "onto the wall
using the hex screws #and washers $.
Caution: Do not overload or climb the equipment!
Maintenance and care instructions
Instructions: Carry out a visual check at regular intervals. Due to our
continuous quality control of the products, technical changes
may occur which may lead to slight deviations in the instructions.
Check at regular intervals that the screw connections are tight.
Check the equipment for possible damage and replace worn-out
parts. The wall bracket is designed only for its intended use.
Improper use voids the warranty.
We are happy to answer any questions you may have.
Your Sport-Thieme Team