Sport-thieme 126 7903 Manual

Operating/assembly instructions
Sport-Thieme skipping rope hanging unit
Prod. no.: 126 7903
Page 1of 2
02/2016
!
!
Assembly instructions for the Sport-Thieme
skipping rope hanging unit
Thank you very much for choosing a Sport-Thieme product. We want to make sure
that you can enjoy this product, so here is some important advice for your safety as
well as for the use and maintenance of the equipment.
Ill. 1 Skipping rope hanging unit
Included:
Pos. Description
1 Skipping rope hanging unit
2 Hexagonal wood screw 8 x 70
3 Washer 8.5
4 Plastic wall plug GD 10 x 60
1. General
The wall-mounted skipping rope hanging unit for tidy storage of more than 180
skipping ropes is a sturdy, galvanised metal rail with 6 hooks. It is 48 cm long
and has a reach of 16 cm.
The skipping rope hanging unit is supplied including fittings for wall mounting.
This material is suitable for mounting to concrete, bricks, sandstone, aerated
concrete and wood.
2. Assembly instructions
Place the hanging unit at the desired height on the wall and mark the drilling holes.
The distance between the holes is 44 cm.

Operating/assembly instructions
Sport-Thieme skipping rope hanging unit
Prod. no.: 126 7903
Page 2of 2
02/2016
!
!
Now drill the two holes and insert the wall plugs. Use the hexagonal wood
screws and washers to mount the skipping rope hanging unit to the wall.
Caution: Do not overload or climb the equipment!
Maintenance and care instructions
Instructions: Carry out a visual check at regular intervals. Due to our
continuous quality control of the products, technical
changes may occur which may lead to slight deviations in
the instructions.
Check at regular intervals that the screw connections are
tight.
Check the equipment for possible damage and
replace worn-out parts. Check the condition of
wooden elements as chipping and other signs of
wear can result from use.
We are happy to answer any questions you may
have.
Your Sport-Thieme Team