SportsArt Fitness UB521M User manual

UB521M SWIVEL SEAT
Owner’s Manual
Sports Art Industrial Co., Ltd. ISO 9001/14001 Certied 2015.12
No. 11, Gong Huan Rd. Tainan City, Taiwan R.O.C. www.gosportsart.com

UB521M SWIVEL SEAT OWNER’S MANUAL CONTENTS
1. INTRODUCTION .............................................................................. 2
2. SAFETY PRECAUTIONS ................................................................. 3
3. LIST OF PARTS ................................................................................ 5
4. ASSEMBLE THE PRODUCT ............................................................ 7
STEP 1 Handlebars and Storage Tray Installation ............................... 7
STEP 2 Seat Back Support and Seat Back Installation ........................ 8
STEP 3 Seat Bottom Cushion Installation ............................................ 9
STEP 4 Seat Base Installation and Removal ....................................... 10
STEP 5 Seat Adjustment ...................................................................... 11
STEP 6 Seat Height Adjustment ........................................................... 12
5. MAINTENANCE ............................................................................... 13
MAINTENANCE Safety Precautions .................................................... 13
MAINTENANCE Schedule ................................................................... 14
MAINTENANCE Task List .................................................................... 15
MAINTENANCE One-Year Maintenance Log ...................................... 16

2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the
UB521M Swivel Seat. Constructed of high quality materials and designed
for years of reliable usage, this product was made for physical therapy,
physical rehabilitation, and commercial tness venues.
Before this product is assembled or operated, we recommend that you
familiarize yourself with this manual. Understanding the correct assembly
and operation of this product will help ensure that exercisers obtain their
tness goals safely and successfully.

3
2. SAFETY PRECAUTIONS
Safety was an important consideration in the design of the SportsArt
UB521M Swivel Seat. However, during the use of the UB521M Swivel Seat,
you must pay careful attention to safety.
●For safety, operate this product only as instructed, and install only
SportsArt parts onto this product.
●Unpack and verify contents of boxes according to the list of parts to check
if any parts are missing.
●Assemble and operate the UB521M Swivel Seat on a solid, level surface;
DO NOT use it outdoors or near water.
●Follow instructions to assemble this product carefully.
●Check the UB521M Swivel Seat before every use. Make sure all parts
are assembled, and all fasteners are tightened. DO NOT use the UB521M
Swivel Seat if the unit is not fully assembled or if fasteners are loose or
worn.
●Wear proper workout clothing; DO NOT wear loose clothing. DO NOT
wear shoes with leather soles or high heels. Tie all long hair back. Do not go
barefoot on this product.
●Do not rock this product. Please be careful in mounting and dismounting
the unit.
●If this product is damaged in any way, stop operating it. If this product has
any issue or is broken, notify the SportsArt service department.
●Contact your SportsArt representatives on all materials damaged in
shipment. (Note: Shipping damages are the responsibility of the carrier.)
● DO NOT use accessories or parts that are not specically recommended
by the manufacturer. Such parts might cause injuries or cause the unit to
fail.
●Never drop or insert any object into any opening of the product.
●Please operate this product in an area with good air circulation. Keep it
away from chemicals and ammable items. Keep it far from sprinklers and
damp areas.
●DO NOT use this product outdoors in order to extend product life.
●All users must be supervised at all times while using this product.
●Children should never be allowed to play on or near the product.
●Do not let kids under 12 years of age operate this product.
●Maximum unloading weight for this product is 180 kg, 400 lb.

4
2. CONSIGNES DE SÉCURITÉ
La sécurité a été un facteur important dans la conception du Système
de Soutien du Poids Corporel SportsArt Fitness UB521M siège pivotant.
Toutefois, lors de l’utilisation du UB521M siège pivotant, vous devez porter
une attention particulière à la sécurité.
●Par mesure de sécurité, utilisez cet appareil uniquement selon les
instructions, et n’installez que des pièces détachées SportsArt sur ce produit.
●Assemblez et utilisez le Système de Soutien du Poids Corporel sur une
surface solide et plane ; ne l’utilisez JAMAIS à l’extérieur ou à proximité de
l’eau.
● Vériez le Système de Soutien du Poids Corporel avant chaque utilisation.
Assurez-vous que toutes les pièces sont assemblées, et que toutes les
xations sont bien serrées. N’UTILISEZ PAS le Système de Soutien du Poids
Corporel si l’appareil n’est pas complètement monté ou si des xations sont
desserrées ou usées.
●Portez des vêtements de séance d’entraînement appropriés ; NE
PORTEZ PAS de vêtements amples. NE PORTEZ PAS de chaussures
avec des semelles en cuir ou avec des talons hauts. Attachez les cheveux
longs. Ne marchez pas pieds nus sur ce produit.
●Si ce produit est endommagé de n’importe quelle façon, arrêtez de
l’utiliser. Si ce produit a un problème ou est en panne, contactez le service
après-vente de SportsArt.
● N’UTILISEZ PAS d’accessoires ou pièces détachées qui ne sont pas
spéciquement recommandés par le fabricant. Ces pièces pourraient
provoquer des blessures ou endommager la machine.
●Ne laissez jamais tomber et n’introduisez jamais d’objet dans les
ouvertures du produit.
●S’il vous plait utilisez ce produit dans un endroit bien aéré. Tenez le à
distance de produits chimiques et de matières inammables. Gardez-le loin
des extincteurs automatiques et des zones humides.
●Tous les utilisateurs doivent être supervisés pendant toute la durée
d’utilisation de ce produit.
●Les enfants ne doivent jamais être autorisés à jouer sur ou à proximité
de ce produit.

5
3. LIST OF PARTS
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Seat base 1 A4 Seat bottom cushion 1
A2 Handlebars 2 A5 Seat back support 1
A3 Storage tray 1 A6 Seat back 1

6
Components in the Hardware Kit
No. Name Qty. Specication Notes
28
Inner hex screw 4 M8*L20
Spring washer M8
Flat washer D17*d8.3*t2
Nylon hex lock nut 4 M8
29 Mushroom top Phillips screw M5*0.8*L12
30
Inner hex screw 4 M6*L20
Spring washer M6
Flat washer 4 D16*d6.3*t2
31
Flat washer 2 D16*d6.3*t2
Spring washer M6*t1.5
Mushroom top inner hex screw 2 M6*P1.0*L20
32
Inner hex screw 4 M8*L20
Spring washer 1 M8
Flat washer D17*d8.3*t2
Components in the Hardware Kit
No. Name Qty. Specication Notes
Lubricant 66A 1
L-shaped Allen wrench 1 (M4)
L-shaped Allen wrench 1 (M5)
L-shaped Allen wrench 1 (M6)
L-shaped Allen wrench 1 (M8)
Double open-end wrench 1 (13*17)
Screwdriver handle 1
Screwdriver shank 1 Flat and Phillips
Fuse 1 110V
220V

7
4. ASSEMBLE THE PRODUCT
(a) Contact your SportsArt representatives on all materials damaged in
shipment. (Note: Shipping damages are the responsibility of the carrier.)
(b) Unpack and verify contents of boxes according to the list of parts to
check if any parts are missing.
(c) Follow instructions below to assemble this product carefully.
(d) DO NOT use this product outdoors in order to extend product life.
Note: In this manual the words “left” and “right” are used to refer to the
product and its parts. As such, these designations correspond to the
“left” and “right” sides of a person in position to exercise on this
product. Also, for brevity, the word “screws” is used where screws,
washers, and other hardware may be involved. And, for clarity, names
of keys are capitalized.
STEP 1 Handlebars and Storage Tray Installation
Please follow instructions (a) through (d) to install the handlebars and storage
tray.
(a) Remove screws (28) on the handlebars (A2).
(b) Set the handlebars (A2) into place on the seat base (A1). Secure it with
screws (28).
(c) Remove screws (29) on the handlebars (A2).
(d) Use screws (29) to secure the storage tray (A3) into place.
(a) (b)
(c)
(d)

8
STEP 2 Seat Back Support and Seat Back Installation
Please follow instructions (a) through (d) to install the seat back support and
seat back.
(a) Remove screws (30) from the seat back support (A5).
(b) Insert the seat back support (A5) into its mount on the seat base (A1), and
use screws (30) to secure it into place.
(c) Remove screws (31) from the seat back (A6).
(d) Hold the seat back (A6) in place on the seat back support (A5), and use
screws (31) to secure it into place.
(c)
(b)
(a)
(d)

9
(a)
(b)
C
STEP 3 Seat Bottom Cushion Installation
Please follow instructions (a) through (b) to install the seat bottom cushion.
(a) Remove screws (32) from the seat bottom cushion (A4).
(b) Set the seat bottom cushion (A4) on its mount on the seat base (A1) and
secure it with screws (32). (Move the lever when securing screws at area
C if necessary and move it back into place after securing screws.)

10
STEP 4 Seat Base Installation and Removal
Align the seat base with the glide track. Lift the lever under the seat or push
down on the foot lever. Push the seat base onto the glide track. At a suitable
position, release the lever to secure the seat base into this location. To
remove the seat base, lift the lever and pull the seat base out from the end
of the glide track.

11
STEP 5 Seat Adjustment
Lift the lever at area A as shown. Turn the seat to the desired position.
Release the lever.
A

12
STEP 6 Seat Height Adjustment
To adjust the seat height, take your weight off the seat. Lift the lever on the
left side at area A. Adjust the seat height to the desired position. Release the
lever.
AA

13
5. MAINTENANCE
This section covers maintenance topics, including instructions on replacing
a fuse and lubricating the walk belt, along with the presentation of a
maintenance schedule, maintenance task list, one-year maintenance log,
and electronics block diagram.
MAINTENANCE Safety Precautions
●Please follow standard safety precautions when servicing on this product.
●Must be performed by trained service personnel only.
●Do NOT use a damp towel to clean the product and do perform the fol-
lowing maintenances.
●Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage components and void the warranty.
● Use a clean, lint-free towel, dampened with a mixture of Simple Green®
all-purpose cleaner, to thoroughly clean the platform.
●This product has moving parts that can be hazardous. Exercise caution
when maintaining, operating, or moving this product.

14
MAINTENANCE Schedule
Area Day Week Month Quarter Year Notes
1Screws Inspect and secure loose parts.
2Cushions Wipe clean with a slightly damp
towel.
3Extension
tube Apply silicone lubricant (A18).
4Rollers Wipe away dirt and debris.

15
MAINTENANCE Task List
Likecars,fitness products requiremaintenance.Regularmaintenance extends
product life, and failure to maintain products can void the manufacturer’s
warranty. Copy the maintenance log sheet, and record maintenance work
for each fitness product.
Daily tasks
1. Use a clean, lint-free towel, dampened with a mixture of Simple Green®
all-purpose cleaner and water, to thoroughly clean the seat bottom and
back cushions.
Weekly tasks
1. Inspect screws and secure them, if necessary.
2. Apply silicone to lubricate the extension tube (A18).
3. Use a towel to wipe rollers clean of dirt and debris.

16
Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28
Completed
Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52
Completed
Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28
Completed
Weekly Tasks Weeks 29-35 Weeks 35-42 Weeks 43-49 Weeks 50-52
Completed
Monthly tasks 1234567891011 12
Completed
Quarterly Tasks Quarter 1 Quarter 2 Quarter 3 Quarter 4
Completed
Yearly Tasks Year 1
Completed
Notes: __________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
MAINTENANCE One-Year Maintenance Log
Facility:_______________________ Supervisor:____________________
Product model number:__________ Serial number:_________________
Start date: ____________________ End date:_____________________

17
Your Authorized Distributor