SPORTSPOWER M7TDY User manual

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE
REQUIRED ASSEMBLY TOOLS
ASSEMBLED DIMENSIONS
FLOOR AREA
4.0M X 2.5M X 3.0M
WEIGHT 15 KG, BUILD IN LOCATION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
Use only hand screw driver
for mounting fittings/screws
as the usage of power drill/
driver scould damage the unit.
2930mm
1870mm
1430mm

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
WARNINGS
PAGE 2 OF 14
•
•
•
•
•
•
•
•
•
We suggest you spend some time reading this guide before following
the simple step-by-step assembly instructions.
Do not discard any of the packaging until you have checked that
you have all parts and fittings listed. When discarding packaging
take care and consideration for others and the environment.
When assembling this equipment be aware of the safety of yourself
and others.
Because of the size of this multiplay we suggest that you assemble
it in the area intended for use.
Some of the assembly will be easier with two people. Seek assistance
when lifting large or heavy items.
Assemble this multiplay on a clean, flat and level surface e.g. the
cardboard packaging.
Keep any tools provided or spare fittings for future use. Only use
the tools specified.
Assemble all parts loosely, by hand, before tightening any bolts or
fixings.
we would still suggest storing your multiplay inside or under a
suitable cover during winter to help protect against damage and
maintain its aesthetic appearance. For details of how to maintain
your furniture please see our ‘How to....look after your multiplay’
section.
BEFORE STARTING ASSEMBLY PLEASE CHECK ALL PARTS ARE
INCLUDED, IF ANY PARTS ARE MISSING PLEASE CONTACT THE
HELPLINE ON ([phone].

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
PAGE 3 OF 14
• WARNING! Not suitable for children under 36 months. Small parts/long
cord-Strangulation Hazard.
• This unit is designed to be used safely by up to 3 children between the age of
3to 6.Maximum weight of 45kg each, simultaneously not to exceed a
combined weight of 135kg.
• Adult supervision is required at all times. Never leave children unattended.
• WARNING！Only for outdoor use.
• WARNING！Only for domestic use.
• Dress children appropriately while on and around this equipment. DO NOT
allow children to wear ponchos, scarves, jewelry, loose shoes, jackets or
clothing with loose strings and/or clothing that might be potentially hazardous
whilst using this equipment.
• DO NOT let children use this equipment in any manner other than intended.
• DO NOT install over concrete, asphalt, gravel or any other hard surface which
may cause injury should a fall occur. Swing set shall be placed over protective
soft material such as sand bed, soft woodlark, and grass lawn. The depth of
sand and soft woodlark shall be a minimum of 6 inches.
• The anchor shall be placed level with or under the ground in order to reduce
tipping hazards.
• DO NOT let children use this equipment until it has been properly assembled
and anchored. Place equipment on level ground not
less than 2M from any
structures or obstacles such as fences, overhanging branches,
laundry or electrical lines, garages, sheds or houses.
• Instruct children not to walk closely in front of, behind or in
between moving play equipment. Instruct children to keep a safe
distance away to avoid being struck by the items in use.
• Instruct children not to twist chains or ropes, or loop them over
the support bar. This adds stress, reduces strength and may result
in failure and cause injury.
• Instruct children not to get off play equipment whilst in motion.

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
PAGE 4 OF 14
• DO NOT allow children to climb or play on the equipment whilst
wet (slips or falls may occur).
• After completion of assembly, ensure all hex nuts are tightened
and in the correct position.
• DO NOT attach items to the playground equipment that are not
specifically designed for use with this equipment, such as, but not
limited to, jump ropes, clotheslines, pet leashes, cables and chains
as they may cause strangulation hazards.
• At the end of each play season, remove all plastic parts and take
indoors. DO NOT allow the use of plastic items when the tempera-
ture drops below 0 degrees.
• Dispose of all packaging properly after the unit has been assembled
• Please retain the assembly manual for future reference and review
each season.
• Check all nuts and bolts for tightness and tighten when required.
• Check swing seats, chains, and other means of attachments for
evidence of deterioration, replace when required in accordance
with the manufacturer’s instructions.
• This unit must be assembled by adults, ensure bolts and small
components are kept out of reach of young children.
• Check all fixings regularly, tighten if necessary, and that the
suspension system is secure.
• Check metal sections or components for signs of corrosion.
• Discontinue use if weakening or breakage found.
• Young children in play are unaware of potential dangers and
hazards, therefore responsible adults supervision is essential.
• Failure to comply with these precautions may result in injury
Disassemble and store indoors during the winter.
• Do not attach items to the equipment that are not specifically
designed for u
s e with this produ ct. Such as,but no t limited to cables
skipping ropes and chains as they may cause strangulation hazards.
• Not suitable for hiring or commercial use.
• Never use the equipment in any manner other than intended.

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
PAGE 5 OF 14
• Shredded bark mulch, wood chips, fine sand or fine gravel are
considered to be acceptable shock-absorbing surfaces when
installed and maintained at a sufficient depth under and around
playground equipment. However each material is only effective
when properly maintained. Material should be checked periodical -
ly and replenished to maintain correct depth as determined neces-
sary for your equipment. Otherwise serious injuries may occur
from a fall.
• Toys shall be accompanied by maintenance instructions drawing
attention to the need of carrying out checks and maintenance of
the main parts at regular intervals; if these checks are not carried
out the toy c
ould ove rturn and otherwise become a hazard. Whenever
practical, the instructions shall also be affixed to the toy.
• Please retain thes e ins tructions for future reference.
TIGHTENING NUTS & BOLTS
• At the start of assembly DO NOT tighten nuts or bolts fully, so
as to allow some possible adjustment for ease of assembly.
• After all major components are assembled, go back over all bolts
and nuts and properly tighten all of them before using this product.

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
PAGE 6 OF 14
1
6
5
9
9
4
4
4
4
5
4
4
4
4
8
88
8
76
6
7
32
9
9

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
PAGE 7 OF 14
QTYPART LISTNO.
1
2
6
7
8
TOP SUPPORT BAR
1
1
3
2
4
9
4
4
2
5
KNOT
HANDLE
ANCHOR
PLASTIC CAP
LEG
CROSS BAR
4
TOP SUPPORT BAR
2
STRENGTHENING PLATE
3

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
HARDWARE LIST
PAGE 8 OF 14
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
11cm
12cm
13cm
0cm
B
BOLT
X2
M8×70mm
A
"U" BOLT
X5
M8×114mm
C
BOLT
X4
M8×45mm
D
BOLT
M8×55mm
X4

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
HARDWARE LIST
TOOLS
PAGE 9 OF 14
G
SPRING WASHER
X21
xmm
H
NUT
M8
X21
F
FLAT WASHER
X12
E
X30
ARC WASHER
1cm
2cm
3cm
0cm
1cm
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
0cm
X1
SPANNER
I
ALLEN KEY
X1
J

DESCRIPTION
M7TDY
MONKEY BAR EXTREME
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
PAGE 10 OF 14
Step 1
13
2
B
x2pcs
E
x4pcs x2pcs
H
x2pcs
G
B
E
E
G
H
3
12
I
J
12