Before first use
…………………………………….
All parts of the blender are to be thoroughly cleaned before using for the first
time. (refer to Section: Cleaning).
Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the mains supply.
Assembling the Glass Jar:
1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
2. Put the blade unit with sealing ring into the cup base (6).
3. Insert the assembled Cup Base onto the bottom of the glass jar and secure
tightly.
4. Mount the glass cup (3) onto the base unit (7). Tune the cup base unit and turn
clockwise until glass jar locks into place.
5. Mount the Measure Cup (1) onto the Lid (2).
6. Secure the Lid onto Glass Jar and press down.
Inserting the Glass Jar:
1. Make sure that the blender is switched off (Switch in the ‘0’ setting).
2. Place the jar assembly (9) on to the motor base (7) and press down until securely
engaged.
How to Use:
1. Place the food you wish to process into the glass jar.
2. Cover the lid on the glass jar and close securely. Place the measuring cup onto
the lid and turn clockwise to lock.
3. Switch on the motor base:
NOTE: Operate the motor for a maximum of 60 seconds or alternating 60 seconds
ON, then 60 seconds OFF to prevent overheating or consequent damage.
SPEED SETTING USE
1 (Low) for light usage with liquids
2 (High) for more solid consistency – for mixing liquids
and solid foodstuffs
M (Manual Pulse setting) for ice crushing & short, powerful impulse
movements
(The switch does not permanently engage in the ‘M’ setting. You have to press and
hold the ‘M’ button)
• After using the blender, always move the switch to the ‘0’ setting and pull out the
mains plug.
• To remove the glass jar simply lift it off the motor base. You do not have to rotate
the glass jar to remove it.
Useful tips:
To achieve the best results when pureeing solid ingredients, place small portions
into the glass jar one by one instead of placing a large quantity all at once.
If you are processing solid ingredients, cut them into small pieces (2-3cm) first.
When mixing solid ingredients start off first with a small amount of liquid.
Gradually add more and more liquid through the opening in the lid.
Always place your hand on top of the blender when you are operating the device.
Be careful when processing hot liquids.
For stirring solid or very thick liquid ingredients we recommend that you use the
blender in impulse mode (by pressing and holding the “M” button) to prevent the
blades from becoming stuck.
Motor Base:
Never immerse the motor base in water. Wipe clean only with a moist cloth.
Simple cleaning / rinsing out the assembled glass jar:
Empty the glass jar and fill with clean water. Place the glass jar on the motor base
and turn the switch several times to the ‘M’ setting. Empty the glass jar and rinse until
clean.
Thorough cleaning of the dismantled glass jar:
Ensure that the glass jar is completely empty before you unscrew the retaining ring.
Be careful when handling the cutting blade. All removable parts are suitable for the
dishwasher.
*We reserve the right to make amendments.
If this product is defective or not working properly
Please DO NOT return to your retail store
Please contact us directly with any
Service or Technical Assistance
Contact us toll free at:
1-800-330-0388
3 4
