Spyder Auto PRO-YD-CS03-AM Series User manual

*Please Note*
If you are unfamiliar with the installation pro-
cesses, professional installation is highly rec-
ommended.
INSTALLATION GUIDE:
PRO-YD-CS03-AM-(ALL COLORS)
1) Open the hood. Remove the headlight retainer
stake by sliding it out towards the grille.
3) Remove the headlight. Squeeze the tab
indicted to loosen the lower lens assembly.
4) Unseat the lower lens assembly and disconnect the
DRL socket and turn signal socket, then remove the
lower lens and set it aside.
2) Unseat the headlight and disconnect the headlight
wiring harnesses.

6) Reconnect the OEM headlight harness to the
SPYDER upper lens Projector headlight assembly.
Seat the SPYDER upper headlight lens.
7) Reinstall the headlight retainer stake to
secure the upper headlight lens assembly.
8) Close the hood and enjoy your SPYDER head-
lights.
5) Reinstall the DRL socket and turn signal
socket into the SPYDER lower lens assembly,
then seat the lower lens assembly.

For further help with installation, please watch our installation video. Follow the direct
link below to our YouTube channel for more information.
http://www.youtube.com/watch?v=K8l5_S0KyaU