Spyder Auto PRO-YD-CCO04 Series User manual

*Please Note*
If you are unfamiliar with the installation processes,
professional installation is highly recommended.
1) Open the hood.
INSTALLATION GUIDE:
PRO-YD-CCO04-(ALL COLORS)
3) Disconnect the turn signal harness. 4) Now you can unseat and remove the upper
grille/turn signal assembly.
2) Push down on the four retainer clips securing the
upper grille to the truck.

6) Unseat the headlight.
7) Disconnect the high beam and low beam
harnesses, then remove the headlight and set it
aside.
9) Connect the high beam and low beam harnesses
to your Spyder headlight.
10) Seat the Spyder headlight.
8) Locate your Spyder headlight.
5) Remove [2x] 10mm bolts securing the headlight.

12) Reinstall the upper grille/turn signal assembly,
being sure to lock all four retainer clips into place.
13) Reconnect the turn signal harness. 14) Close the hood and enjoy your new Spyder
headlights.
11) Reinstall the [2x] 10mm bolts to mount the
headlight.

For further help with installation, please watch our installation video. Follow the direct
link below to our YouTube channel for more information.
http://www.youtube.com/watch?v=pGwHThceNPA