SR PORTABLES THIA User manual

Portable Lithium Solar Generator
Instruction Manual
Please visit our website www.srportables.com to register your product
Packing List
THIA
1 Pcs Solar Generator
1 Pcs Solar Charging Cable (DC)
1 Pcs AC/DC Adapter
1 Pcs User Manual
1 Pcs Car Charger
1 Pcs Light Bulb
1

2
Part Description
Safety Warning
Safety and Precautions
Please read all the safety warnings and labels before using the product.
Avoid exposing the product to rain or using the product in a humid environment.
Do not install the product near heat sources, such as electric furnaces and heaters.
Wipe the product clean with a dry cloth.
In case of fire, use dry powder fire extinguishers for this product. Do not use water fire extinguisher, which may cause electric shock.
Please do not alter or disassemble this product.
1.
2.
3.
4.
5.
6.

3
Storage and Maintenance
Safety and Precautions
Solar Panel to charge the Product
How to charge this Product?
Choose a suitable solar panel (recommended DC14~40V/120W).
Keep the solar panel under direct sunlight and facing the sun.
Connect the solar panel to the product at the input port( Part 5 in the
Part Description) using the DC cable.
Please charge the product under Operational Temperature: Charge 0°C
~ 45°C, Discharge -20°C ~ 60°C (powering appliances)
When the product is fully charged by the sun, it will stop charging
automatically.(The charging time is dierent under dierent sunlight
intensity)
All products can be charged and used simultaneously.
During charging, it is normal for the product to get a lile hot.
Make sure that the positive and negative poles of solar panels are
connected correctly.
Please make sure the cable connection is correct and stable, or it will
result in overheating and short circuits.
1.
2.
3.
4.
5.
6.
7.
8.
9.
AC Charger to charge the Product
Always use the standard AC charger that comes with the product.
Insert one end of the adapter into the wall outlet and insert the other end into the input port( Part 5 in the Part Description) of the
product.
Please unplug the charger after charging is completed. (It takes about 5-6hrs to fully recharge the product if using a 90W AC adapter
charger).
During charging, it is normal for the product to get a lile hot.
Make sure that the wiring is connected properly, otherwise the contact terminals may melt or ignite at high temperatures.
1.
2.
3.
4.
5.
Car Charger to charge the Product
Connect the product to the cigaree lighter socket( Part 5 in the Part Description) in the car with the cigaree lighter cable provided in
the package.
The product will be fully charged with a 24V car baery, but only partially charged with a 12V car baery.
Charge the product after starting the car.
Make sure that the wiring is connected properly, otherwise the contact terminals may melt or ignite at high temperatures.
1.
2.
3.
4.
Operating and storage environment may influence product life and the reliability of performance. Remember to:
(i) Place the product in a dry and well- ventilated area with mild temperature
(suitable temperature: 0°C -45°C, suitable relative humidity 10% ~ 90% )
(ii) Place the product in a safe area where it will not fall or shake.
(iii) Keep the product away from corrosive and combustible material.
The product will turn itself o when the baery voltage is very low. If this happens, you need to charge the baery within 2-3 months.
If you are not going to use it for a long time, please charge it fully before storage and then charge it at least once every month. Store
the product in a dry environment.
1.
2.
3.

4
Turn ON/OFF the Product
AC/DC Output
Press and hold the master power buon about 2 seconds to turn ON/OFF the product. The LED indicator light will
light up/switch o.
1. Check to make sure the product is turned on. Otherwise, you cannot use the AC/ DC output.
2. DC output - The DC output is turned on when the product is switched ON. Connect the appliance to the
respective DC output.
3. AC output - Connect the appliance to the AC output socket. Press the Torch/Inverter buon for 3s to turn on
the inverter / AC output. Press the Torch/Inverter buon for 3s to turn o the inverter / AC output.
Output
USB - A Ports
USAB - A Ports for smartphones, cameras,
e-readers, tablates, wearable devices, etc.
DC 5525 Ports
DC 5525 Ports for WiFi routers, etc or
AC Outlet
AC Outlet for lamps, fans, laptops and other
small household and electronics appliances.

5
Technical Specifications
Model
Input
Cell Type
Adapter 12V-9V 2A Max:
Solar Panel 12.9V-24V 2A Max:
130Wh (10.8V 12Ah)
AC Output Peak Power: 200W
AC 100W:
Power
AC Voltage 220V or 110V, 50Hz or 60Hz:
2x USB-A: DC 5V/2A
4x DC 5525 9V-12.6V/2A:
Wave Form: modified sine wave
DC Output
AC Undervoltage: rated voltage - 20%
AC Overvoltage: rated voltage - 20%
AC Short circuit:Yes, recovery by disconnection & re-start
SmartAir Cooling
Size
Net Weight
LED Lighting
Cooling Fan
Solar Panel Suggestion
L204xW90xH160.7mm
1.5kg
Floodlight: 5W
AC Overload: 150W 20W±
20W ~ 40W mono crystalline or poly crystalline
AC Overheating: 80 5℃±℃
Torch: 1.5W
Protection
Functions
Car Charger 12V-24V 2A Max:
DC Output Protection: over current
DC Input Protection: anti-reverse
THIA
Operating Conditions
Visit our website www.srportables.com for more information or contact our technical team on [phone]
Operational Environment: Indoor and Outdoor (non waterproof)
Operational Temperature: Charge 0°C ~ 45°C, Discharge -20°C ~ 60°C (powering appliances)
Storage: -20°C ~ 45°C
1.
2.
3.